The purpose of this study is to investigate the effect of the concentration of silane coupling solution on the tensile strength of basalt fiber and the interfacial properties of basalt fiber reinforced polymer composi...The purpose of this study is to investigate the effect of the concentration of silane coupling solution on the tensile strength of basalt fiber and the interfacial properties of basalt fiber reinforced polymer composites.The surface treatment of basalt fibers was carried out using an aqueous alcohol solution method.Basalt fibers were subjected to surface treatment with 3-Methacryloxypropyl trimethoxy silane at 0.5 wt.%,1 wt.%,2 wt.%,4 wt.%and 10 wt.%.The basalt monofilament tensile tests were carried out to investigate the variation in strength with the concentration of the silane coupling agent.The microdroplet test was performed to examine the effect of the concentration of the silane coupling agent on interfacial strength of basalt reinforced polymer composites.The film was formed on the surface of the basalt fiber treated silane coupling agent solution.The tensile strength of basalt fiber increased because the damaged fiber surface was repaired by the firm of silane coupling agent.The firm was effective in not only the surface protection of basalt fiber but also the improvement on the interfacial strength of fiber-matrix interface.However,the surface treatment using the high concentration silane coupling agent solution has an adverse effect on the mechanical properties of the composite materials,because of causing the degradation of the interfacial strength of the composite materials.展开更多
This study aims for development of highly filled jute fiber reinforced composites that contains jute fiber over fiber weight fraction 60%,and jute fiber reinforced composite was fabricated by the hot-pressing method.T...This study aims for development of highly filled jute fiber reinforced composites that contains jute fiber over fiber weight fraction 60%,and jute fiber reinforced composite was fabricated by the hot-pressing method.The molding temperature was changed from 175°C to 230°C,to investigate the effect of molding temperature on the mechanical properties of jute fiber reinforced composites.The effect of surface treatment of jute fiber on the mechanical properties of jute fiber reinforced composites was also investigated.As a result,the jute fiber reinforced composites using surface treated fiber has low porosity,and the jute fiber reinforced composite having low porosity has high flexural strength and modulus.The jute fiber reinforced composite using acetone treated fiber molded at 200°C has the maximum flexural strength and modulus.展开更多
文摘The purpose of this study is to investigate the effect of the concentration of silane coupling solution on the tensile strength of basalt fiber and the interfacial properties of basalt fiber reinforced polymer composites.The surface treatment of basalt fibers was carried out using an aqueous alcohol solution method.Basalt fibers were subjected to surface treatment with 3-Methacryloxypropyl trimethoxy silane at 0.5 wt.%,1 wt.%,2 wt.%,4 wt.%and 10 wt.%.The basalt monofilament tensile tests were carried out to investigate the variation in strength with the concentration of the silane coupling agent.The microdroplet test was performed to examine the effect of the concentration of the silane coupling agent on interfacial strength of basalt reinforced polymer composites.The film was formed on the surface of the basalt fiber treated silane coupling agent solution.The tensile strength of basalt fiber increased because the damaged fiber surface was repaired by the firm of silane coupling agent.The firm was effective in not only the surface protection of basalt fiber but also the improvement on the interfacial strength of fiber-matrix interface.However,the surface treatment using the high concentration silane coupling agent solution has an adverse effect on the mechanical properties of the composite materials,because of causing the degradation of the interfacial strength of the composite materials.
文摘This study aims for development of highly filled jute fiber reinforced composites that contains jute fiber over fiber weight fraction 60%,and jute fiber reinforced composite was fabricated by the hot-pressing method.The molding temperature was changed from 175°C to 230°C,to investigate the effect of molding temperature on the mechanical properties of jute fiber reinforced composites.The effect of surface treatment of jute fiber on the mechanical properties of jute fiber reinforced composites was also investigated.As a result,the jute fiber reinforced composites using surface treated fiber has low porosity,and the jute fiber reinforced composite having low porosity has high flexural strength and modulus.The jute fiber reinforced composite using acetone treated fiber molded at 200°C has the maximum flexural strength and modulus.