Numerical simulations were performed to predict the film cooling effectiveness on the fiat plate with a three- dimensienal discrete-hole film cooling arrangement. The effects of basic geometrical characteristics of th...Numerical simulations were performed to predict the film cooling effectiveness on the fiat plate with a three- dimensienal discrete-hole film cooling arrangement. The effects of basic geometrical characteristics of the holes, i.e diameter D, length L and pitch S/D were studied. Different turbulent heat transfer models based on constant and variable turbulent Prandtl number approaches were considered. The variability of the turbulent Prandtl number Prt in the energy equation was assumed using an algebraic relation proposed by Kays and Crawford, or employing the Abe, Kondoh and Nagano eddy heat diffusivity closure with two differential transport equations for the temperature variance ko and its destruction rate εθ The obtained numerical results were directly compared with the data that came from an experiment based on Transient Liquid Crystal methodology. All implemented models for turbulent heat transfer performed sufficiently well for the considered case. It was confirmed, however, that the two- equation closure can give a detailed look into film cooling problems without using any time-consuming and inherently unsteady models.展开更多
Numerical simulations were performed to predict the film cooling effectiveness on the fiat plate with a three-dimensional discrete hole film cooling RSM-AKN turbulent heat transfer models based on variable turbulent P...Numerical simulations were performed to predict the film cooling effectiveness on the fiat plate with a three-dimensional discrete hole film cooling RSM-AKN turbulent heat transfer models based on variable turbulent Prandtl number approaches were considered. Obtained numerical results were directly compared with the data that came from an experiment based on Transient Liquid Crystal methodology. All implemented models for turbulent heat transfer performed sufficiently well for the considered case. It was confirmed, however, that the two-equation closure can give a detailed look into film cooling problems without using any time-consuming and inherently unsteady models. The RSM-AKN turbulent model was used in micoholes case too. The main target of simulations was maintain the same level of cooling efficiency ratio in both cases and confirm that is possible significantly reduce mass flows of the coolant in microholes case.展开更多
文摘Numerical simulations were performed to predict the film cooling effectiveness on the fiat plate with a three- dimensienal discrete-hole film cooling arrangement. The effects of basic geometrical characteristics of the holes, i.e diameter D, length L and pitch S/D were studied. Different turbulent heat transfer models based on constant and variable turbulent Prandtl number approaches were considered. The variability of the turbulent Prandtl number Prt in the energy equation was assumed using an algebraic relation proposed by Kays and Crawford, or employing the Abe, Kondoh and Nagano eddy heat diffusivity closure with two differential transport equations for the temperature variance ko and its destruction rate εθ The obtained numerical results were directly compared with the data that came from an experiment based on Transient Liquid Crystal methodology. All implemented models for turbulent heat transfer performed sufficiently well for the considered case. It was confirmed, however, that the two- equation closure can give a detailed look into film cooling problems without using any time-consuming and inherently unsteady models.
文摘Numerical simulations were performed to predict the film cooling effectiveness on the fiat plate with a three-dimensional discrete hole film cooling RSM-AKN turbulent heat transfer models based on variable turbulent Prandtl number approaches were considered. Obtained numerical results were directly compared with the data that came from an experiment based on Transient Liquid Crystal methodology. All implemented models for turbulent heat transfer performed sufficiently well for the considered case. It was confirmed, however, that the two-equation closure can give a detailed look into film cooling problems without using any time-consuming and inherently unsteady models. The RSM-AKN turbulent model was used in micoholes case too. The main target of simulations was maintain the same level of cooling efficiency ratio in both cases and confirm that is possible significantly reduce mass flows of the coolant in microholes case.
