Synthesis of novel adsorbent by intercalation of biopolymer in LDH for the removal of arsenic from synthetic and natural water

This study focuses on the synthesis of nanocomposites named CCA and CZA that were prepared by the incorporation of cellulose(CL)in the Ca/Al and Zn/Al layered double hydroxide(LDH),respectively.These materials were then used for the uptake of As(Ⅲ)and As(V)from aqueous medium.Characterization of both nanocomposites(CCA and CZA)was done using FTIR and Raman analysis to identify the functional groups,N2 adsorption-desorption isotherms to determine the specific surface area and pore geometry and XPS analysis to obtain the surface atomic composition.Some other characters were investigated using simultaneous TGA and DTA and elemental chemical analysis(CHNS/O).The crystallinity of the prepared nanocomposites was displayed by XRD patterns.Furthermore,the sheet-like structure of the LDHs and the irregularity of surface morphology with porous structure were observed by TEM and SEM microphotographs.Optimization of maximum adsorption capacity was adjusted using different parameters including pH,contact time and adsorbent dosage.The pseudo-second-order model was in good fitting with kinetics results.The adsorption isotherm results showed that CZA exhibits better adsorption capacity for As(Ⅲ)than CCA and the Langmuir isotherm model described the data well for both nanocomposites.Thermodynamic studies illustrated the endothermic nature of CCA and exothermic nature on CZA,as well as the fact that the adsorption process is spontaneous.A real water sample collected from well located in Gabes(Tunisia),has also been treated.The obtained experimental results were confirmed that these sorbents are efficient for the treatment of hazardous toxic species such as.

Synthesis and application of biocompatible nontoxic nanoparticles for reclamation of Ce^3＋ from synthetic wastewater： Toxicity assessment, kinetic, isotherm and thermodynamic study

The aim of present study is to synthesize forsterite nanoparticles（FRST） for the reclamation of cerium ions（Ce3＋） from synthetic wastewater.The aim to synthesize FRST nanoparticles is due to its biocompatible and nontoxic nature.The formation of nanoparticles with average diameter of 58 nm was confirmed by TEM analysis.SEM images of bare FRST nanoparticles show a heterogeneous surface with porous nature.BET surface area of FRST nanoparticles is calculated to be 33.69 m2/g.The significant uptake of Ce3＋ ions can be obtained for all the selected concentrations（25-150 mg/L） within 2 h of adsorbent—adsorbate interaction.The pH study shows that by increasing pH from acidic to alkaline range,higher removal can be achieved.Temperature study demonstrates the endothermic nature of Ce3＋adsorption.The value of sticking probability suggests very high sticking probability of Ce3＋ ion for FRST nanoparticles.Ce3＋ uptake is favored by higher temperature and with the increase in temperature from298 to 328 K,Langmuir adsorption capacity increases from 36.45 to 42.99 m2/g.Applicability of FRST nanoparticles was also investigated for other light and heavy rare earth elements in single solute and multisolute systems,FRST nanoparticles show the significant removal of divalent metallic pollutants as well.The assessment of chemical toxicity of treated wastewater was carried out with the bioluminescent photobacterium（Vibrio fischeri） and decreased toxicity was observed in treated water samples.The outcome of present study suggests that the FRST nanoparticles can be efficiently utilized for the removal of Ce3＋ ions and a wide range of other pollutant species as well.

Synthesis of malachite@clay nanocomposite for rapid scavenging of cationic and anionic dyes from synthetic wastewater

Synthesis of malachite@clay nanocomposite was successfully carried out for the removal of cationic（Methylene Blue,MB） and anionic dyes（Congo Red,CR） from synthetic wastewater.Nanocomposite was characterized by TEM,SEM,FT-IR,EDS analysis and zeta potential.TEM analysis indicated that the particle diameter of nanocomposite was in the range of 14 to23 nm.Various important parameters viz.contact time,concentration of dyes,nanocomposite dosage,temperature and solution pH were optimized to achieve maximum adsorption capacity.In the case of MB,removal decreased from 99.82%to 93.67%while for CR,removal decreased from 88.55%to 75.69%on increasing dye concentration from 100 to 450 mg/L.pH study confirmed the higher removal of CR in acidic range while MB removal was higher in alkaline range.Kinetic study revealed the applicability of pseudo-second-order model for the adsorption of both dyes.Negative values of AG0 for both systems suggested the feasibility of dye removal and support for spontaneous adsorption of CR and MB on nanocomposite.Nanocomposite showed 277.77 and 238.09 mg/g Langmuir adsorption capacity for MB and CR respectively.Desorption of dyes from the dye loaded nanocomposite was easily carried out with acetone.The results indicate that the prepared malachite@clay nanocomposite is an efficient adsorbent with high adsorption capacity for the aforementioned dyes.