Long channel for energy deliver (III)

At present time the development of new methods of the single-wire long distance energy transfer is of great interest of science. These works are the prolongation and development of Tesla studies in the beginning of XX century. In particular, not so long ago highly effective energy transfer between two resonant circuits, connected by very thin wire (100 mkm) with more than kilometer length had been demonstrated. In these experiments Tesla type transformers with the output voltage about several ten kilovolts and output power up to 10 kW were used [1]. An effective replacement of wire by laser-plasma channel in that configuration of experiment would be the obvious improvement of demonstrated technology.

High power disk laser

The mono-module disk laser concept is an effective design for diode-pumped solid-state lasers, which allows the realization of lasers with super-high output power, having very good efficiency and also excellent beam quality. Since the first demonstration of the principle in 1964 the output power of mono-module disk has been increased to the level of few kW in continuous wave (CW) mode of operation. “Zig-Zag” disk laser geometry does not look like as a perspective one for further output parameters growing. The scaling laws for mono-module disk laser design show that the limits for CW mode of operation are far beyond 100 kW for output power and the energy can be higher than 100 J in pulsed mode of operation. Due to the efficient porous cooling technology and possibility of amplified spontaneous emission (ASE) suppression the operation of the mono-module disk laser geometry is possible in CW and pulse-periodical (P-P) modes at extremely high output power.

High power optics and its new manifestations

The advent of the laser has placed stringent requirements on the fabrication, performance and quality of optical elements employed within systems for most practical applications. Their high power performance is generally governed by three distinct steps, firstly the absorption of incident optical radiation (governed primarily by various absorption mechanisms);secondly, followed by a temperature increase and response governed primarily by thermal properties and finally the elements thermo-optical and thermomechanical response, e.g., distortion, stress birefringenous fracture, etc. All of which needs to be understood in the design as efficient, compact, reliable and useful for many applications high power systems, under a variety of operating conditions, pulsed and continuous wave, rep-rated or burst mode of varying duty cycles.

To the space by laser light (II)

New approach to the problem of laser jet engine (LJE) creation is based on the use of shock waves (SW) resonance association mechanism, generated by the optical pulsating discharge (OPD). For the creation OPD is proposed to use powerful pulse - periodic (P-P) laser radiation with duration of pulses ~ 100 - 150 ns and high pulse repetition frequency ~ 50 - 100 kHz. OPD is formed with the help of matrix of reflectors (MR). This is allowed: several times to increase the effectiveness of laser emission use for purposes of LJE creation, to avoid strong impact loads on the apparatus, to exclude the thermal action of laser plasma on the reflector, to decrease the laser emission screening by plasma, to remove the problem of the resonance oscillations appearance into the object moved with the help of laser. In our article the estimations of possible LJE thrust levels under the conditions of the proposed mechanism of reactive motion are given. Also, the new approaches to the creation of the high power high repetition rate laser systems for the “Impulsar” program are examined.

High power lasers and ecology of atmosphere (I)

There are many appearances in the literature of reliable observations of studying so-called “jets” and “sprites” - the discharges in the gigantic natural capacitor “Ionosphere-Earth” [1]. The volume of such a discharge is approximately 5-10 thousand cubic kilometers and usually it appears above the surface of ocean. There are the cases also of above mentioned discharges on the ground. The value of the energy transferred to the earth can comprise to several terajoule. Events are accompanied by the emission of the waves of ultra-low frequency. Their study has the significant interest from many points of view. The essence of the observed irregular phenomena consists of the electromechanical conversion of the energy excesses of natural electricity into mechanical and thermal energy of cyclones, typhoons and other natural cataclysms. The ionosphere can retain only the specific quantity of energy. Otherwise, it discards the surpluses of electricity through the atmosphere or transforms them into the energy of storms, in that number and inside the Earth. By using the part of the natural electricity for useful purposes it is possible to govern the weather of planet. Causing the artificial breakdowns of the ionosphere it could be possible to arrange the discharge of the controlled aqueous sediments at the necessary points of the globe. It could be possible as well to attempt to regulate the climate of planet and to decrease the amplitudes of the magnetic storms, earthquakes and hurricanes.