Study on Polygon Region Filling Method

The paper puts forward a highly efficient and practical scan line based on the filling algorithm. The algorithm takes the lines of polygon as line segments with directions and introduces the concept of marked value when the apex of polygon faces scan line, determines whether there are intersection points between the lines of polygon and scan lines, by judging whether the marked value has changed or not. This method avoids the extra decision and treatment of odd points in traditional algorithm, and it needs little calculations but it is highly efficient.

流线型钢箱梁涡激振动机理与气动控制措施

以某主跨390 m的独塔流线型钢箱梁斜拉桥为工程依托,采用风洞试验与计算流体动力学(Computational Fluid Dynamics, CFD)相结合的方法对流线型钢箱梁涡激振动机理与气动控制措施进行研究。首先,采用几何缩尺比为1∶30的主梁节段模型进行主梁涡振性能与气动控制措施优化研究;其次,采用CFD方法对主梁涡振响应进行流固耦合计算,将Newmark-β算法嵌入ANSYS Fluent用户自定义函数(User Defined Functions, UDFs)实现主梁结构振动响应求解,同时结合动网格技术实现主梁断面流固耦合分析;并根据判断条件来检索箱梁壁面上的网格单元,以获得主梁断面振动过程中的表面压力,然后结合主梁结构振动响应、表面压力以及流场特征等对主梁涡激振动机理进行分析。结果表明:该桥主梁原设计方案存在涡激共振现象,将梁底检修车轨道内移120 cm可有效抑制主梁涡振响应;主梁涡激振动响应的数值模拟结果与风洞试验结果吻合较好;检修车轨道内移120 cm后主要改变了箱梁下表面平均压力系数分布特性,且箱梁表面各测点脉动压力卓越频率不一致,有效减小了主梁涡激振动响应;流线型箱梁靠近迎风侧的“被动区域”对结构涡振响应贡献较小,背风侧“驱动区域”发生周期性旋涡脱落是影响流线型箱梁涡振的主要因素。