In order to achieve higher density of P/M steels using the die wall lubrication compacting method or powder lubricant in warm compaction process, the influence of different process parameters on the green density of w...In order to achieve higher density of P/M steels using the die wall lubrication compacting method or powder lubricant in warm compaction process, the influence of different process parameters on the green density of warm compacted samples was studied. According to the orthogonal test method, the authors systematically study the influence of the different compaction pressure, condition of lubrication and compaction temperature on the green density of the sample in the warm compaction process, and put forward the optimal process parameter of warm compaction experiment. It is found that, a high compaction pressure （≥700 MPa）, die wall lubrication combined with a small amount of internal lubricants, and fitting compaction temperature by different condition of lubrication, are the optimal parameters in warm compaction process.展开更多
Three variants of the sequence of formation of the nacre-prism transition layer were observed in Pinctada fucata (Bivalvia, Mollusca) shells. In each case, the layer was formed by the organic matrix secreted by the ma...Three variants of the sequence of formation of the nacre-prism transition layer were observed in Pinctada fucata (Bivalvia, Mollusca) shells. In each case, the layer was formed by the organic matrix secreted by the mantle, together with the interprismatic organic envelope. The continuity of the organic phase throughout the shell was maintained as the new nacreous layer was formed on the nacre-prism transition layer. Changes in the interprismatic organic envelopes on either side of the nacre-prism transition zone indicated that the organic matrix of the nacre-prism transition layer becomes embedded into the organic phase of the prismatic layer. It is concluded that penetration and erosion of the prisms by the organic matrix generates a strong bond between the prismatic and nacreous layers.展开更多
We report a unique shell margin that differed from the usual shell structure of Pinctada fucata.We observed empty organic envelopes in the prismatic layer and the formation of the nacreous layer in the shell margin.Al...We report a unique shell margin that differed from the usual shell structure of Pinctada fucata.We observed empty organic envelopes in the prismatic layer and the formation of the nacreous layer in the shell margin.All the characteristics of the growing margin indicated that the shell was growing rapidly.To explain this anomaly,we propose the concept of "jumping development".During jumping development,the center of growth in the bivalve shell jumps forward over a short time interval when the position of the mantle changes.Jumping development explains the unusual structure of the anomalous shell and the development of annual growth lines in typical shells.Annual growth lines are the result of a discontinuity in the shell microstructure induced by jumping development.展开更多
基金the National Scientific and Technological Project(No.MKPT-2004-09ZD)the Innovative Engineering Program of Central South University
文摘In order to achieve higher density of P/M steels using the die wall lubrication compacting method or powder lubricant in warm compaction process, the influence of different process parameters on the green density of warm compacted samples was studied. According to the orthogonal test method, the authors systematically study the influence of the different compaction pressure, condition of lubrication and compaction temperature on the green density of the sample in the warm compaction process, and put forward the optimal process parameter of warm compaction experiment. It is found that, a high compaction pressure （≥700 MPa）, die wall lubrication combined with a small amount of internal lubricants, and fitting compaction temperature by different condition of lubrication, are the optimal parameters in warm compaction process.
基金supported by the National Natural Science Foundation of China (U0831001 and 40876068)the National High Technology Research and Development Program of China (2010CB126405 and 2010AA- 09Z405)
文摘Three variants of the sequence of formation of the nacre-prism transition layer were observed in Pinctada fucata (Bivalvia, Mollusca) shells. In each case, the layer was formed by the organic matrix secreted by the mantle, together with the interprismatic organic envelope. The continuity of the organic phase throughout the shell was maintained as the new nacreous layer was formed on the nacre-prism transition layer. Changes in the interprismatic organic envelopes on either side of the nacre-prism transition zone indicated that the organic matrix of the nacre-prism transition layer becomes embedded into the organic phase of the prismatic layer. It is concluded that penetration and erosion of the prisms by the organic matrix generates a strong bond between the prismatic and nacreous layers.
基金supported by the National Natural Science Foundation of China (Grant Nos. U0831001 and 40876068)the National High Technology Research and Development Program of China (Grant Nos. 2010CB126405 and 2010AA09Z405)
文摘We report a unique shell margin that differed from the usual shell structure of Pinctada fucata.We observed empty organic envelopes in the prismatic layer and the formation of the nacreous layer in the shell margin.All the characteristics of the growing margin indicated that the shell was growing rapidly.To explain this anomaly,we propose the concept of "jumping development".During jumping development,the center of growth in the bivalve shell jumps forward over a short time interval when the position of the mantle changes.Jumping development explains the unusual structure of the anomalous shell and the development of annual growth lines in typical shells.Annual growth lines are the result of a discontinuity in the shell microstructure induced by jumping development.
