We introduced the hydrophilic groups to acrylic bone cement to improve compliance and achieve more interdigitation between the bone and the acrylic bone cement in order to create better substrates for immediate loadin...We introduced the hydrophilic groups to acrylic bone cement to improve compliance and achieve more interdigitation between the bone and the acrylic bone cement in order to create better substrates for immediate loading. FTIR-ATR, contact angle, and maximum breach torque were employed for measurement. The results reveal that the introduction of hydrophilic functional groups has increased PMMA＇s surface hydrophilicity after contact angle test. FTIR-ATR results suggest the hydrophilic groups participate in the polymerization reactions, and maximum breach torque of the hydrophilic acrylic bone cements is near 110 Ncm torque. Those effects make it possible for conventional acrylic bone cement application in immediate loading of dental implant.展开更多
Low maturity coal samples were taken from the Ordos Basin to conduct gold tube thermal simulation experiment in a closed system,and the characteristics of the products were analyzed to find out the fractionation mecha...Low maturity coal samples were taken from the Ordos Basin to conduct gold tube thermal simulation experiment in a closed system,and the characteristics of the products were analyzed to find out the fractionation mechanism of carbon isotopes and the causes of abnormal carbon isotopic compositions of natural gas.At the heating rates of 2℃/h(slow)and 20℃/h(rapid),the low maturity coal samples of the Ordos Basin had the maximum yields of alkane gas of 302.74 mL/g and 230.16 mL/g,theδ13C1 ranges of-34.8‰to-23.6‰and-35.5‰to-24.0‰;δ13C2 ranges of-28.0‰to-9.0‰and-28.9‰to-8.3‰;andδ13C3 ranges of-25.8‰to-14.7‰and-26.4‰to-13.2‰,respectively.Alkane gas in the thermal simulation products of rapid temperature rise process showed obvious partial reversal of carbon isotope series at 550℃,and at other temperatures showed positive carbon isotope series.In the two heating processes,theδ13C1 turned lighter first and then heavier,and the non-monotonic variation of theδ13C1 values is because the early CH4 is from different parent materials resulted from heterogeneity of organic matter or the carbon isotope fractionation formed by activation energy difference of early enriched 12CH4 and late enriched 13CH4.The reversal of carbon isotope values of heavy hydrocarbon gas can occur not only in high to over mature shale gas(oil-type gas),but also in coal-derived gas.Through thermal simulation experiment of toluene,it is confirmed that the carbon isotope value of heavy hydrocarbon gas can be reversed and inversed at high to over mature stage.The isotope fractionation effect caused by demethylation and methyl linkage of aromatic hydrocarbons may be an important reason for carbon isotope inversion and reversal of alkane gas at the high to over mature stage.展开更多
文摘We introduced the hydrophilic groups to acrylic bone cement to improve compliance and achieve more interdigitation between the bone and the acrylic bone cement in order to create better substrates for immediate loading. FTIR-ATR, contact angle, and maximum breach torque were employed for measurement. The results reveal that the introduction of hydrophilic functional groups has increased PMMA＇s surface hydrophilicity after contact angle test. FTIR-ATR results suggest the hydrophilic groups participate in the polymerization reactions, and maximum breach torque of the hydrophilic acrylic bone cements is near 110 Ncm torque. Those effects make it possible for conventional acrylic bone cement application in immediate loading of dental implant.
基金Supported by the National Natural Science Foundation of China(41902160,41625009)the China Postdoctoral Science Foundation(2019M650967,2020T130721)the China National Science and Technology Major Project(2016ZX05007-001)
文摘Low maturity coal samples were taken from the Ordos Basin to conduct gold tube thermal simulation experiment in a closed system,and the characteristics of the products were analyzed to find out the fractionation mechanism of carbon isotopes and the causes of abnormal carbon isotopic compositions of natural gas.At the heating rates of 2℃/h(slow)and 20℃/h(rapid),the low maturity coal samples of the Ordos Basin had the maximum yields of alkane gas of 302.74 mL/g and 230.16 mL/g,theδ13C1 ranges of-34.8‰to-23.6‰and-35.5‰to-24.0‰;δ13C2 ranges of-28.0‰to-9.0‰and-28.9‰to-8.3‰;andδ13C3 ranges of-25.8‰to-14.7‰and-26.4‰to-13.2‰,respectively.Alkane gas in the thermal simulation products of rapid temperature rise process showed obvious partial reversal of carbon isotope series at 550℃,and at other temperatures showed positive carbon isotope series.In the two heating processes,theδ13C1 turned lighter first and then heavier,and the non-monotonic variation of theδ13C1 values is because the early CH4 is from different parent materials resulted from heterogeneity of organic matter or the carbon isotope fractionation formed by activation energy difference of early enriched 12CH4 and late enriched 13CH4.The reversal of carbon isotope values of heavy hydrocarbon gas can occur not only in high to over mature shale gas(oil-type gas),but also in coal-derived gas.Through thermal simulation experiment of toluene,it is confirmed that the carbon isotope value of heavy hydrocarbon gas can be reversed and inversed at high to over mature stage.The isotope fractionation effect caused by demethylation and methyl linkage of aromatic hydrocarbons may be an important reason for carbon isotope inversion and reversal of alkane gas at the high to over mature stage.
