期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
基于正交试验的淬硬模具钢球头铣削加工表面粗糙度研究 被引量:2
1
作者 王绪昌 周咏辉 赵军 《工具技术》 2018年第7期27-30,共4页
采用正交试验法研究整体硬质合金球头铣刀铣削加工淬硬模具钢Cr12Mo V时切削参数对零件加工表面粗糙度的影响。设计了以主轴转速、每齿进给量、径向切深、侧偏角和前倾角为主要因素的5水平5因素正交试验,通过极差分析和方差分析方法研... 采用正交试验法研究整体硬质合金球头铣刀铣削加工淬硬模具钢Cr12Mo V时切削参数对零件加工表面粗糙度的影响。设计了以主轴转速、每齿进给量、径向切深、侧偏角和前倾角为主要因素的5水平5因素正交试验,通过极差分析和方差分析方法研究了切削参数对表面粗糙度的影响规律,明确了主要影响因素。结果表明:表面粗糙度随每齿进给量和径向切深的增大而增大,随主轴转速的增大而减小,随侧偏角和前倾角的增大呈现出先减小后增大的趋势,各因素的影响程度从大到小依次为每齿进给量、径向切深、主轴转速、侧偏角、前倾角。 展开更多
关键词 正交试验 淬硬模具钢 加工参数 表面粗糙度
下载PDF
阴囊大面积特发性钙沉积症手术美学视角及文献复习(附1例报告)
2
作者 周正兴 孙松 +6 位作者 杨光 刘伟 许国胜 李波 王旭昌 戴政 陈红兵 《中国男科学杂志》 CAS CSCD 2024年第2期130-133,共4页
目的探讨阴囊大面积特发性钙沉积症治疗方法,提高对该疾病的认识。方法报告1例阴囊大面积特发性钙沉积症患者临床资料,结合文献讨论其发病机理、临床特征及诊疗措施。38岁男性患者,发现阴囊皮肤多发性结节8年伴局部微痒入院。体检:阴囊... 目的探讨阴囊大面积特发性钙沉积症治疗方法,提高对该疾病的认识。方法报告1例阴囊大面积特发性钙沉积症患者临床资料,结合文献讨论其发病机理、临床特征及诊疗措施。38岁男性患者,发现阴囊皮肤多发性结节8年伴局部微痒入院。体检:阴囊约3/5遍布花生米大小、质地软中带硬的结节,活动差,无压痛。入院完善相关检查后在腰麻下做阴囊肉膜外广泛结节切除,缺损阴囊皮肤行阴囊带蒂皮瓣修复术。结果术后予以抗炎补液对症治疗,术后一周拆线,术口甲级愈合,术后随访3个月,阴囊外形满意。术后大体标本病理示:符合阴囊特发性钙沉积症。结论本病少见,多发生于儿童或青年,位于真皮,为无痛性硬结节,对结节较小的可采用激光、电灼、冷冻等方法。对于病患面积较大,切除皮肤缺损较大的患者,采用带蒂皮瓣阴囊塑形,恢复阴囊美学视角,提高患者满意度。 展开更多
关键词 阴囊特发钙沉积症 修复外科手术 外科皮瓣 病例报告
原文传递
X-perCT及超声引导穿刺引流个体化治疗方案在肾脓肿患者中的应用 被引量:1
3
作者 周正兴 许国胜 +5 位作者 刘伟 李波 王旭昌 孙松 查彬彬 陈红兵 《国际泌尿系统杂志》 2023年第2期270-274,共5页
目的 分析X-perCT及超声引导下经皮肾镜穿刺引流术在治疗肾脓肿中的临床价值.方法 回顾性分析2012年5月至2020年6月在本院收治的47例肾脓肿患者的临床资料.将患者随机分为X-perCT穿刺组(25例)和BK超声穿刺组(22例),观察各组的穿刺和引... 目的 分析X-perCT及超声引导下经皮肾镜穿刺引流术在治疗肾脓肿中的临床价值.方法 回顾性分析2012年5月至2020年6月在本院收治的47例肾脓肿患者的临床资料.将患者随机分为X-perCT穿刺组(25例)和BK超声穿刺组(22例),观察各组的穿刺和引流效果,并对脓液进行细菌培养分析.结果 BK超声穿刺组有15例一次性穿刺成功,7例因脓肿多房、脓肿腔壁较厚先行B超穿刺失败,再次经X-perCT定位穿刺成功.X-perCT穿刺组均成功在X-perCT定位下穿刺成功.所有患者均未发生穿刺并发症.将所有患者抽吸的脓液进行细菌培养,42例细菌培养成功,其中金葡球菌27例,大肠杆菌12例,克雷伯菌3例,5例培养未见明显细菌.X-perCT穿刺组的穿刺成功率、穿刺费用、患者满意度均高于BK超声穿刺组,而引流时间、重新置管率低于BK超声穿刺组,差异均有统计学意义(均P<0.05).结论 X-perCT及超声引导下经皮肾镜穿刺引流都简便安全,术后恢复快,并发症少.X-perCT引导更精准,重新置管率更低,患者满意度更高,值得推广应用. 展开更多
关键词 活组织检查 针吸 肾脓肿 X-perCT 超声检查
原文传递
Polycrystalline ZSM-5 Aggregates Induced by Seed and Catalytic Performance in Methanol to Hydrocarbon
4
作者 wang xuchang JIAO Chuyu +5 位作者 JI Zhuo JIAO Qirui QIN Bo DU Yanze ZHENG Jiajun LI Ruifeng 《无机材料学报》 SCIE EI CAS 2024年第8期945-954,I0010-I0013,共14页
Synthesis of ZSM-5 zeolite typically utilizes small molecule polyamines or quaternary ammonium salts as organic structure guiding agent(OSDA).By contrast,the OSDA-free hydrothermal synthesis system eliminates the use ... Synthesis of ZSM-5 zeolite typically utilizes small molecule polyamines or quaternary ammonium salts as organic structure guiding agent(OSDA).By contrast,the OSDA-free hydrothermal synthesis system eliminates the use of organic templates and the subsequent calcination procedure.This not only reduces the cost of synthesis,but also prevents environmental pollution from the combustion of organic templates,representing an eco-friendly approach.Despite this,literature suggests that even so-called template-free synthesis systems often involve trace amount of organic substances like alcohol.In the present work,a calcined commercial ZSM-5 zeolite was served as seed,with sodium aluminate as aluminum source and silica sol as silicon source,ensuring an entirely template-free synthesis system.Polycrystalline ZSM-5 aggregates consisted of rod-like nanocrystals were successfully prepared in the completely OSDA-free system.Effects of the Si/Al ratio in ZSM-5 seed,dosage and crystallization conditions such as crystallization temperature and crystallization time on ZSM-5 synthesis were investigated.The results show that a highly crystallinity ZSM-5 aggregate consisting of primary nano-sized crystals less than 100 nm is produced from a gel precursor with 5.6%(in mass)seed after hydrothermal treatment for 48 h.Furthermore,the Si/Al ratio in ZSM-5 seed has little effect on the topological structure and pore structure of the synthesized samples.However,the seeds with a low Si/Al ratio facilitate faster crystallization of zeolite and enhance the acidity,especially the strong acid centers,of the catalyst.The catalytic performance of the synthesized polycrystalline ZSM-5 was evaluated during dehydration of methanol and compared with a commercial reference ZSM-5r.The results exhibit that as compared with the reference catalyst,the fabricated sample has a longer catalytic lifetime(16 h vs 8 h)attributed to its hierarchical pores derived from the loosely packed primary nanoparticles.Additionally,the prepared polycrystalline catalyst also exhibits a higher aromatics selectivity(28.1%-29.8%vs 26.5%). 展开更多
关键词 ZSM-5 polycrystalline aggregate crystal seed structure guiding agent
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部