Nanosized tin dioxide particles were prepared by sol-gel dialytic processes with tin(Ⅳ) chloride and alcohol as start materials. The nanoparticles of tin dioxide were charactered by thermogravimetry and differential ...Nanosized tin dioxide particles were prepared by sol-gel dialytic processes with tin(Ⅳ) chloride and alcohol as start materials. The nanoparticles of tin dioxide were charactered by thermogravimetry and differential thermal analysis(TG-DTA), X-ray diffraction(XRD), transmission electron microscopy (TEM) and BET. The results show that the average diameter of tin dioxide particles dried at 353 K was about 2 nm. Even if the tin dioxide particles were calcined at 873 K, the average diameter of particles was less than 10 nm. The removal of Cl- was solved by using this kind of method. The mechanism of the formation of tin dioxide nanosized particles was proposed and analyzed in this paper. We also measured the sensitivity of the sensor based on the tin oxide powder calcined at 673 K to NH 3, alcohol, acetone, hexane and CO. The gas-sensing performance results indicate that this sensor has a higher sensitivity to alcohol and acetone, and selectivity for NH 3, hexane and CO at an operating temperature of 343 K.展开更多
基金Supported by the National Natural Science Foundation of China(No.2 0 2 710 2 8) and Tianjin Natural Science Founda-tion(No.0 336 0 2 5 11)
文摘Nanosized tin dioxide particles were prepared by sol-gel dialytic processes with tin(Ⅳ) chloride and alcohol as start materials. The nanoparticles of tin dioxide were charactered by thermogravimetry and differential thermal analysis(TG-DTA), X-ray diffraction(XRD), transmission electron microscopy (TEM) and BET. The results show that the average diameter of tin dioxide particles dried at 353 K was about 2 nm. Even if the tin dioxide particles were calcined at 873 K, the average diameter of particles was less than 10 nm. The removal of Cl- was solved by using this kind of method. The mechanism of the formation of tin dioxide nanosized particles was proposed and analyzed in this paper. We also measured the sensitivity of the sensor based on the tin oxide powder calcined at 673 K to NH 3, alcohol, acetone, hexane and CO. The gas-sensing performance results indicate that this sensor has a higher sensitivity to alcohol and acetone, and selectivity for NH 3, hexane and CO at an operating temperature of 343 K.
