In order to make full use of salt lake magnesium resources and improve the strength of the thermal decomposed magnesium oxychloride cement （TDMOC）, the effects of citric acid on the hydration process and mechanical ...In order to make full use of salt lake magnesium resources and improve the strength of the thermal decomposed magnesium oxychloride cement （TDMOC）, the effects of citric acid on the hydration process and mechanical properties of TDMOC was studied. The hydration heat release at initial 24 h and strengths at 3, 7, and 28 days of TDMOC specimens were conducted. The hydration products and paste microstructure were analyzed by XRD, FT-IR and SEM, respectively. The results showed that citric acid can not only reduce the 24 h hydration heat release and delay the occurring time of second peak of TDMOC, but also produce more 5Mg（OH）z.MgC12.SH20 and less Mg（OH）2 in hydration process of TDMOC. More perfect and slender crystals were observed in the microstructure of the TDMOC pastes with citric acid. The results demonstrated that citric acid as an additive of TDMOC can decrease the hydration heat release and increase the compressive strength and flexural strength of TDMOC. The possible mechanism for the strength enhancement was discussed.展开更多
Sodium dihydrogen phosphate (NaH_(2)PO_(4)) and potassium dihydrogen phosphate (KH_(2)PO_(4)) were selected as additives for magnesium oxysulfate (MOS) cement.The phase composition and the microstructure of MOS cement...Sodium dihydrogen phosphate (NaH_(2)PO_(4)) and potassium dihydrogen phosphate (KH_(2)PO_(4)) were selected as additives for magnesium oxysulfate (MOS) cement.The phase composition and the microstructure of MOS cement were characterized using X-ray diffraction (XRD),thermogravimetric analysis (TG-DSC),Flourier transform infrared spectroscopy (FT-IR),mercury intrusion porosimetry (MIP) and scanning electron microscopy (SEM).It is found that both NaH_(2)PO_(4) and KH_(2)PO_(4) lead to an increase in the compressive strength and an improvement in the volume stability of MOS cement.The XRD,MIP and SEM results show that the addition of NaH_(2)PO_(4) or KH_(2)PO_(4) does not change the phase composition of MOS cement but promotes the formation of strength phase of 5Mg(OH)_(2)·MgSO_(4)·7H_(2)O (5·1·7 phase).This phase brings a considerable improvement in the microstructure of MOS cement,which has a positive effect on the properties of MOS cement.展开更多
A new magnesium phosphate bone cement （MPBC） was prepared as a byproduct of boroncontaining magnesium oxide （B-MgO） after extracting Li2CO3 from salt lakes. We analyzed the elementary composition of the B-MgO raw ...A new magnesium phosphate bone cement （MPBC） was prepared as a byproduct of boroncontaining magnesium oxide （B-MgO） after extracting Li2CO3 from salt lakes. We analyzed the elementary composition of the B-MgO raw materials and the effects of calcination temperature on the performance of MPBC. The phase composition and microstructure of the B-MgO raw materials and the hydration products （KMgPO4.6H2O） of MPBC were analyzed by X-ray diffraction and scanning electron microscopy. The results showed that ionic impurities and the levels of toxic elements were sufficiently low in B-MgO raw materials to meet the medical requirements for MgO （Chinese Pharmacopeia, 2O10 Edition） and for hydroxyapatite surgical implants （GB23101.1-2O08）. The temperature of B-MgO calcination had a marked influence on the hydration and hardening of MPBC pastes. Increasing calcination temperature prolonged the time required for the MPBC slurry to set, significantly decreased the hydration temperature, and prolonged the time required to reach the highest hydration temperature. However, the compressive strength of hardened MPBC did not increase with higher calcination temperatures. In the 900-1 000 ~C temperature range, the hardened MPBC had a higher compressive strength. Imaging analysis suggested that the setting time and the highest hydration temperature of MPBC pastes were dependent on the size and crystal morphology of the B-MgO materials. The production and microstructure compactness of KMgPOa＇6H2O, the main hydration product, determined the compressive strength.展开更多
基金Funded by One-Hundred Talent Project of CAS(No.B0210)the Qinghai Province Science and Technology Tackling Key Project(No.2008-G-158)
文摘In order to make full use of salt lake magnesium resources and improve the strength of the thermal decomposed magnesium oxychloride cement （TDMOC）, the effects of citric acid on the hydration process and mechanical properties of TDMOC was studied. The hydration heat release at initial 24 h and strengths at 3, 7, and 28 days of TDMOC specimens were conducted. The hydration products and paste microstructure were analyzed by XRD, FT-IR and SEM, respectively. The results showed that citric acid can not only reduce the 24 h hydration heat release and delay the occurring time of second peak of TDMOC, but also produce more 5Mg（OH）z.MgC12.SH20 and less Mg（OH）2 in hydration process of TDMOC. More perfect and slender crystals were observed in the microstructure of the TDMOC pastes with citric acid. The results demonstrated that citric acid as an additive of TDMOC can decrease the hydration heat release and increase the compressive strength and flexural strength of TDMOC. The possible mechanism for the strength enhancement was discussed.
基金Supported by the Key Research and Development and Transformation Plan of Qinghai Province-Special Project for Transforming Scientific and Technological Achievements(No.2019-NN-159)。
文摘Sodium dihydrogen phosphate (NaH_(2)PO_(4)) and potassium dihydrogen phosphate (KH_(2)PO_(4)) were selected as additives for magnesium oxysulfate (MOS) cement.The phase composition and the microstructure of MOS cement were characterized using X-ray diffraction (XRD),thermogravimetric analysis (TG-DSC),Flourier transform infrared spectroscopy (FT-IR),mercury intrusion porosimetry (MIP) and scanning electron microscopy (SEM).It is found that both NaH_(2)PO_(4) and KH_(2)PO_(4) lead to an increase in the compressive strength and an improvement in the volume stability of MOS cement.The XRD,MIP and SEM results show that the addition of NaH_(2)PO_(4) or KH_(2)PO_(4) does not change the phase composition of MOS cement but promotes the formation of strength phase of 5Mg(OH)_(2)·MgSO_(4)·7H_(2)O (5·1·7 phase).This phase brings a considerable improvement in the microstructure of MOS cement,which has a positive effect on the properties of MOS cement.
基金Funded by the National Natural Science Foundation of China(No.21276264)the Qinghai Province Science and TechnologyDepartment(No.2013-G-208)
文摘A new magnesium phosphate bone cement （MPBC） was prepared as a byproduct of boroncontaining magnesium oxide （B-MgO） after extracting Li2CO3 from salt lakes. We analyzed the elementary composition of the B-MgO raw materials and the effects of calcination temperature on the performance of MPBC. The phase composition and microstructure of the B-MgO raw materials and the hydration products （KMgPO4.6H2O） of MPBC were analyzed by X-ray diffraction and scanning electron microscopy. The results showed that ionic impurities and the levels of toxic elements were sufficiently low in B-MgO raw materials to meet the medical requirements for MgO （Chinese Pharmacopeia, 2O10 Edition） and for hydroxyapatite surgical implants （GB23101.1-2O08）. The temperature of B-MgO calcination had a marked influence on the hydration and hardening of MPBC pastes. Increasing calcination temperature prolonged the time required for the MPBC slurry to set, significantly decreased the hydration temperature, and prolonged the time required to reach the highest hydration temperature. However, the compressive strength of hardened MPBC did not increase with higher calcination temperatures. In the 900-1 000 ~C temperature range, the hardened MPBC had a higher compressive strength. Imaging analysis suggested that the setting time and the highest hydration temperature of MPBC pastes were dependent on the size and crystal morphology of the B-MgO materials. The production and microstructure compactness of KMgPOa＇6H2O, the main hydration product, determined the compressive strength.
