A mesoporous LiFe0.99Mo0.01PO4/C composite was synthesized by the sol-gel method using （NH4）2MoO4 as a doping starting material. The formation of conductive carbon, metal doping and mesopores was achieved simultaneo...A mesoporous LiFe0.99Mo0.01PO4/C composite was synthesized by the sol-gel method using （NH4）2MoO4 as a doping starting material. The formation of conductive carbon, metal doping and mesopores was achieved simultaneously in the prepared material. The characterizations of crystal structures and microstructures were investigated using X-ray diffraction （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, extended X-ray-absorption fine-structure （EXAFS） and X-ray-absorption near-structure spectroscopy （XANES） while the surface area was determined using N2 adsorption techniques. Cyclic voltammetry （CV） and charge-discharge cycling performance were used to characterize its electrochemical properties. The sample possessed uniformly distributed mesopores with an average pore size of 4 nm, and the specific surface area was about 69.368 m^2/g. The results show that the reversible capacity of mesoporous LiFe0.99Mo0.01PO4/C is about 160 mAh/g at 0.1C, 135 mAh/g at 1C and 90 mAh/g at 5C, respectively. The capacity fading is neglectable.展开更多
基金supported by Beijing Natural Science Foundation (No. 207001)the Funding Project for Academic Human Resources Development in Institutions of Higher Learning under the Jurisdiction of Beijing Munici-pality, and the Major State Basic Research Development Program of China (No. 2002CB211807)+1 种基金supported partly by the National Out-standing Youth Fund of China (No. 10125523 to Z.W.)the Knowledge Innovation Program of Chinese Academy of Sciences (KJCX2-SW-N11, KJCX2-SW -H12-02)
文摘A mesoporous LiFe0.99Mo0.01PO4/C composite was synthesized by the sol-gel method using （NH4）2MoO4 as a doping starting material. The formation of conductive carbon, metal doping and mesopores was achieved simultaneously in the prepared material. The characterizations of crystal structures and microstructures were investigated using X-ray diffraction （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, extended X-ray-absorption fine-structure （EXAFS） and X-ray-absorption near-structure spectroscopy （XANES） while the surface area was determined using N2 adsorption techniques. Cyclic voltammetry （CV） and charge-discharge cycling performance were used to characterize its electrochemical properties. The sample possessed uniformly distributed mesopores with an average pore size of 4 nm, and the specific surface area was about 69.368 m^2/g. The results show that the reversible capacity of mesoporous LiFe0.99Mo0.01PO4/C is about 160 mAh/g at 0.1C, 135 mAh/g at 1C and 90 mAh/g at 5C, respectively. The capacity fading is neglectable.
