Waste management is crucial due to the fast increase of human population, causing an increase in solid waste generation which if not properly managed causes environmental problems. Around 57% of the wastes generated f...Waste management is crucial due to the fast increase of human population, causing an increase in solid waste generation which if not properly managed causes environmental problems. Around 57% of the wastes generated from homes are made up of green material (fruits, vegetables…). Thus, reusing and recycling green wastes through composting is one way of reducing the waste load to landfills. Composting is the transformation of raw organic materials into organic soil amendments that provide nutrients to crops and enhance the tilth, fertility, and productivity of soils. Aerobic windrow composting system at Sukomi Greensite facility located at Karantina is performed, where materials biodegrade under controlled conditions to produce compost. However, assessment of the quality of the compost is fundamental in order to determine its usages. Thus, regular testing of physical, chemical and biological parameters was performed for adequate monitoring purposes. The basic objective of this study was to determine the characteristics of the Lebanese municipal solid waste compost on a yearly basis and compare these characteristics amongst the years. Hence, each parameter was tested and compared to the BNQ international Canadian standards for proper classification of the compost and adequate identification of its usages. The preliminary data obtained were statistically diagnosed through principal component analysis by Spadv55 software. All the data reflected the normal content value of the studied parameters with minor differences between the years except for year 2007 which demonstrated higher levels of Potassium, Phosphate, Lead and Cadmium. The characteristics of the compost enabled it to be used as a soil amendment on all types of agricultural and landscape commodities at the adequate dosages and proper timing. This data will additionally reflect the efficiency of the solid waste management practices adopted via highlighting the importance of the implementation of the integrated solid waste management practices.展开更多
Surface water quality is largely influenced by both natural processes and anthropogenic inputs. This study involves the characterization of the concentration of heavy metals of Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn, and ...Surface water quality is largely influenced by both natural processes and anthropogenic inputs. This study involves the characterization of the concentration of heavy metals of Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn, and the sources of pollution in water and sediment of the Upper Litani River Basin (ULRB) in Lebanon. The investigation was performed during three seasons of rainy, mid-rainy spring and wet periods for two years during different flow rates. Sediments were characterized by a set of chemical analyses, cation exchange capacity (CEC), mineralogy of the sediments, X-ray diffraction (XRD), and Fourier transformed infrared spectroscopy (FTIR). To assess metal contamination in sediment, Consensus-Based Sediment Quality Guidelines of Wisconsin (CBSQG) were applied. The metals contamination in the sediments was also evaluated by contamination factor (Cf). The test results showed that the effect of seasonal variations was significant in the Upper Litani River Basin. Principal Compound Analysis (PCA) and Pearson’s correlation were also performed in this study to compare and determine the correlation between metals in water and sediments. The concentrations of Pb, Cd, Cu, Cr and Zn in all sediment samples are above the norms in winter, while Fe was increased in summer. The results showed that the importance of monitoring of changes of heavy metals values and physico-chemical characterization of different parameters could represent the possibility of a comprehensive assessment of negative pressures on the water and soil ecosystem of Litani River Basin during different seasons.展开更多
文摘Waste management is crucial due to the fast increase of human population, causing an increase in solid waste generation which if not properly managed causes environmental problems. Around 57% of the wastes generated from homes are made up of green material (fruits, vegetables…). Thus, reusing and recycling green wastes through composting is one way of reducing the waste load to landfills. Composting is the transformation of raw organic materials into organic soil amendments that provide nutrients to crops and enhance the tilth, fertility, and productivity of soils. Aerobic windrow composting system at Sukomi Greensite facility located at Karantina is performed, where materials biodegrade under controlled conditions to produce compost. However, assessment of the quality of the compost is fundamental in order to determine its usages. Thus, regular testing of physical, chemical and biological parameters was performed for adequate monitoring purposes. The basic objective of this study was to determine the characteristics of the Lebanese municipal solid waste compost on a yearly basis and compare these characteristics amongst the years. Hence, each parameter was tested and compared to the BNQ international Canadian standards for proper classification of the compost and adequate identification of its usages. The preliminary data obtained were statistically diagnosed through principal component analysis by Spadv55 software. All the data reflected the normal content value of the studied parameters with minor differences between the years except for year 2007 which demonstrated higher levels of Potassium, Phosphate, Lead and Cadmium. The characteristics of the compost enabled it to be used as a soil amendment on all types of agricultural and landscape commodities at the adequate dosages and proper timing. This data will additionally reflect the efficiency of the solid waste management practices adopted via highlighting the importance of the implementation of the integrated solid waste management practices.
文摘Surface water quality is largely influenced by both natural processes and anthropogenic inputs. This study involves the characterization of the concentration of heavy metals of Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn, and the sources of pollution in water and sediment of the Upper Litani River Basin (ULRB) in Lebanon. The investigation was performed during three seasons of rainy, mid-rainy spring and wet periods for two years during different flow rates. Sediments were characterized by a set of chemical analyses, cation exchange capacity (CEC), mineralogy of the sediments, X-ray diffraction (XRD), and Fourier transformed infrared spectroscopy (FTIR). To assess metal contamination in sediment, Consensus-Based Sediment Quality Guidelines of Wisconsin (CBSQG) were applied. The metals contamination in the sediments was also evaluated by contamination factor (Cf). The test results showed that the effect of seasonal variations was significant in the Upper Litani River Basin. Principal Compound Analysis (PCA) and Pearson’s correlation were also performed in this study to compare and determine the correlation between metals in water and sediments. The concentrations of Pb, Cd, Cu, Cr and Zn in all sediment samples are above the norms in winter, while Fe was increased in summer. The results showed that the importance of monitoring of changes of heavy metals values and physico-chemical characterization of different parameters could represent the possibility of a comprehensive assessment of negative pressures on the water and soil ecosystem of Litani River Basin during different seasons.
