SiC particles were added to the Mg97Zn1Y2 alloy to improve its mechanical properties and damping properties.The microstructure,mechanical properties,and strain amplitude dependence of high-damping and high-strength Si...SiC particles were added to the Mg97Zn1Y2 alloy to improve its mechanical properties and damping properties.The microstructure,mechanical properties,and strain amplitude dependence of high-damping and high-strength SiC/Mg97Zn1Y2 magnesium matrix composites were analyzed.The strain amplitude-dependent damping of SiC/Mg97Zn1Y2 composites and the effect of SiC on this property were discussed herein.In anelastic damping,the strain amplitude-dependent damping curves of the composites were mainly divided into two sections,dominated by the G-L model.When the strain amplitude reaches a certain value,the dislocation motion inside the matrix becomes complicated.Moreover,the damping of the material could not be explained using the G-L model,and a new damping model related to microplastic deformation was proposed.In the anelastic damping stage,with the increase in the amount of the added SiC particles,the damping performance first increases and then decreases.Moreover,the damping value of the composite material is larger than that of the matrix alloy.In the microplastic deformation stage,the damping properties of the composites and matrix alloys considerably increase with the strain amplitude.展开更多
The influence of solid solution treatment on the microstructure and corrosion resistance of as-cast Mg_(95.5)Zn_(1.5)Y_(3) alloy is characterized.The microstructure of the as-cast Mg_(95.5)Zn_(1.5)Y_(3) alloy mainly c...The influence of solid solution treatment on the microstructure and corrosion resistance of as-cast Mg_(95.5)Zn_(1.5)Y_(3) alloy is characterized.The microstructure of the as-cast Mg_(95.5)Zn_(1.5)Y_(3) alloy mainly consisted ofα-Mg,W(Mg_(3)Zn_(3)Y_(2))phase,and the long period stacking ordered(LPSO)(Mg_(12)ZnY)phase.After solid solution treatment,most of the W phase disappears gradually with increasing solution treatment time,with only a small amount of W phase distributed as particle.The LPSO phase slightly dissolved into substrate,and its morphology transitions from blocky shape to rod shape.Solid solution treatment of Mg_(95.5)Zn_(1.5)Y_(3) exhibits excellent corrosion resistance,because the Y and Zn atoms became enriched in the matrix and the changed morphologies of the LPSO and W phases were modified through heat treatment.The alloy created with solid solution treatment at 520 ℃ for 10 hours exhibits corrosion potential of−1.419 V,suggesting a significant improvement in corrosion performance.展开更多
基金Funded by the National Natural Science Foundation of China(No.51665012)。
文摘SiC particles were added to the Mg97Zn1Y2 alloy to improve its mechanical properties and damping properties.The microstructure,mechanical properties,and strain amplitude dependence of high-damping and high-strength SiC/Mg97Zn1Y2 magnesium matrix composites were analyzed.The strain amplitude-dependent damping of SiC/Mg97Zn1Y2 composites and the effect of SiC on this property were discussed herein.In anelastic damping,the strain amplitude-dependent damping curves of the composites were mainly divided into two sections,dominated by the G-L model.When the strain amplitude reaches a certain value,the dislocation motion inside the matrix becomes complicated.Moreover,the damping of the material could not be explained using the G-L model,and a new damping model related to microplastic deformation was proposed.In the anelastic damping stage,with the increase in the amount of the added SiC particles,the damping performance first increases and then decreases.Moreover,the damping value of the composite material is larger than that of the matrix alloy.In the microplastic deformation stage,the damping properties of the composites and matrix alloys considerably increase with the strain amplitude.
基金the National Natural Science Foundation of China(51361010,51665012)supported by China Scholarship Council.
文摘The influence of solid solution treatment on the microstructure and corrosion resistance of as-cast Mg_(95.5)Zn_(1.5)Y_(3) alloy is characterized.The microstructure of the as-cast Mg_(95.5)Zn_(1.5)Y_(3) alloy mainly consisted ofα-Mg,W(Mg_(3)Zn_(3)Y_(2))phase,and the long period stacking ordered(LPSO)(Mg_(12)ZnY)phase.After solid solution treatment,most of the W phase disappears gradually with increasing solution treatment time,with only a small amount of W phase distributed as particle.The LPSO phase slightly dissolved into substrate,and its morphology transitions from blocky shape to rod shape.Solid solution treatment of Mg_(95.5)Zn_(1.5)Y_(3) exhibits excellent corrosion resistance,because the Y and Zn atoms became enriched in the matrix and the changed morphologies of the LPSO and W phases were modified through heat treatment.The alloy created with solid solution treatment at 520 ℃ for 10 hours exhibits corrosion potential of−1.419 V,suggesting a significant improvement in corrosion performance.
基金National Natural Science Foundation of China(51361010,51665012)Natural Science Foundation of Jiangxi Province(196 20114BAB216015)+2 种基金Jiangxi Province Science Foundation for Outstanding Scholarship(20171BCB23061)the Foundation of Jiangxi Educational Committee(GJJ12320)the State Key Laboratory of Solidification Processing in NWPU(SKLSP201321)
基金National Natural Science Foundation of China (51665012)Jiangxi Province Science Foundation for Outstanding Scholarship (20171BCB23061,2018ACB21020)Primary Research&Development Plan of Jiangxi Province (2019BBEL50019)。
基金National Natural Science Foundation of China(51665012)Jiangxi Province Science Foundation for Outstanding Scholarship(20171BCB23061,2018ACB21020)Primary Research&Development Plan of Jiangxi Province(2019BBEL50019)。
