A review of composition evolution in Ni-based single crystal superalloys

Due to the outstanding creep performance, nickel-based single crystal superalloys(Ni-SXs) are extensively applied in modern aero-engine and industrial gas turbine. Apart from the special single crystal structure which is disadvantageous to extension of creep cracks, Ni-SXs derive the creep strength from intrinsic two-phase microstructure(γ phase and γ’ phase). Main microstructural parameters including volume fraction of γ’ phase and the lattice misfit, and the formation and distribution of precipitated phase are determined by the compositions of alloys. Besides, the creep properties are greatly influenced by these microstructural parameters and precipitated phase. This review has summarized the relationships between different alloying elements and microstructures and indicated their influence on creep properties of Ni-SXs. In addition, with the improvements of experimental methods and characterization technique, some recent discoveries have provided additional evidence to support or challenge the pervious creep theories of superalloys. In view of these new discoveries, this review has provided some perspectives which can be referenced in future compositional design of Ni-SXs.

Inconsistent creep between dendrite core and interdendritic region under different degrees of elemental inhomogeneity in nickel-based single crystal superalloys

The creep inconsistency between dendrite core and interdendritic region is investigated in a nickel-based single crystal superalloy under 1373 K and 137 MPa.Two specimens with higher and lower degree of elemental inhomogeneity on dendritic structures are compared.For specimen with higher inhomogeneity,stronger segregation of refractory elements reinforces the local strength in dendrite core,but damages the strength in interdendritic region.Creep strain is accumulated faster in interdendritic region giving rise to promoted dislocation shearing inγphase,faster degradation of dislocation networks and facilitated topological inversion of rated structures.Although the segregation of refractory elements produces a high density of topologically close-packed(TCP)phase in dendrite core,faster accumulation of creep strain forms microcracks prior in interdendritic region that gives rise to final rupture of the specimen.In another specimen,increased solid solution time gives rise to overall reduced inhomogeneity.Creep inconsistency is relieved to show more uniform evolution of dislocation substructures and rafting between dendrite core and interdendritic region.The second specimen is ruptured by formation and extension of microcracks along TCP phase although the precipitation of TCP phase is relatively restricted under reduced inhomogeneity.Importantly,the balance of local strength between dendrite core and interdendritic region results in over 40%increase of creep rupture life of the second specimen.