This paper describes a tape nanolithography method for the rapid and economical manufacturing of flexible,wearable nanophotonic devices.This method involves the soft lithography of a donor substrate with air-void nano...This paper describes a tape nanolithography method for the rapid and economical manufacturing of flexible,wearable nanophotonic devices.This method involves the soft lithography of a donor substrate with air-void nanopatterns,subsequent deposition of materials onto the substrate surface,followed by direct taping and peeling of the deposited materials by an adhesive tape.Without using any sophisticated techniques,the nanopatterns,which are preformed on the surface of the donor substrate,automatically emerge in the deposited materials.The nanopatterns can then be transferred to the tape surface.By leveraging the works of adhesion at the interfaces of the donor substrate-deposited material-tape assembly,this method not only demonstrates sub-hundred-nanometer resolution in the transferred nanopatterns on an area of multiple square inches but also exhibits high versatility and flexibility for configuring the shapes,dimensions,and material compositions of tape-supported nanopatterns to tune their optical properties.After the tape transfer,the materials that remain at the bottom of the air-void nanopatterns on the donor substrate exhibit shapes complementary to the transferred nanopatterns on the tape surface but maintain the same composition,thus also acting as functional nanophotonic structures.Using tape nanolithography,we demonstrate several tapesupported plasmonic,dielectric,and metallo-dielectric nanostructures,as well as several devices such as refractive index sensors,conformable plasmonic surfaces,and Fabry-Perot cavity resonators.Further,we demonstrate tape nanolithography-assisted manufacturing of a standalone plasmonic nanohole film and its transfer to unconventional substrates such as a cleaved facet and the curved side of an optical fiber.展开更多
基金This work was supported in part by the U.S.National Science Foundation under Grant No.ECCS-1711839in part by the Iowa State University’s Plant Sciences Institute through the Faculty Scholar Program.
文摘This paper describes a tape nanolithography method for the rapid and economical manufacturing of flexible,wearable nanophotonic devices.This method involves the soft lithography of a donor substrate with air-void nanopatterns,subsequent deposition of materials onto the substrate surface,followed by direct taping and peeling of the deposited materials by an adhesive tape.Without using any sophisticated techniques,the nanopatterns,which are preformed on the surface of the donor substrate,automatically emerge in the deposited materials.The nanopatterns can then be transferred to the tape surface.By leveraging the works of adhesion at the interfaces of the donor substrate-deposited material-tape assembly,this method not only demonstrates sub-hundred-nanometer resolution in the transferred nanopatterns on an area of multiple square inches but also exhibits high versatility and flexibility for configuring the shapes,dimensions,and material compositions of tape-supported nanopatterns to tune their optical properties.After the tape transfer,the materials that remain at the bottom of the air-void nanopatterns on the donor substrate exhibit shapes complementary to the transferred nanopatterns on the tape surface but maintain the same composition,thus also acting as functional nanophotonic structures.Using tape nanolithography,we demonstrate several tapesupported plasmonic,dielectric,and metallo-dielectric nanostructures,as well as several devices such as refractive index sensors,conformable plasmonic surfaces,and Fabry-Perot cavity resonators.Further,we demonstrate tape nanolithography-assisted manufacturing of a standalone plasmonic nanohole film and its transfer to unconventional substrates such as a cleaved facet and the curved side of an optical fiber.
