Optical nanofiber(ONF)is a special tool to achieve the interaction between light and matter with ultralow power.In this paper,we demonstrate V-type electromagnetically induced transparency(EIT)in cold atoms trapped by...Optical nanofiber(ONF)is a special tool to achieve the interaction between light and matter with ultralow power.In this paper,we demonstrate V-type electromagnetically induced transparency(EIT)in cold atoms trapped by an ONFbased two-color optical lattice.At an optical depth of 7.35,90%transmission can be achieved by only 7.7 pW coupling power.The EIT peak and linewidth are investigated as a function of the coupling optical power.By modulating the pWlevel control beam of the ONF-EIT system in sequence,we further achieve efficient and high contrast control of the probe transmission,as well as its potential application in the field of quantum communication and quantum information science by using one-dimensional atomic chains.展开更多
The use of low-coherence light is expected to be one of the effective ways to suppress or even eliminate the laser–plasma instabilities that arise in attempts to achieve inertial confinement fusion.In this paper,a re...The use of low-coherence light is expected to be one of the effective ways to suppress or even eliminate the laser–plasma instabilities that arise in attempts to achieve inertial confinement fusion.In this paper,a review of low-coherence high-power laser drivers and related key techniques is first presented.Work at typical low-coherence laser facilities,including Gekko XII,PHEBUS,Pharos III,and Kanal-2 is described.The many key techniques that are used in the research and development of low-coherence laser drivers are described and analyzed,including low-coherence source generation,amplification,harmonic conversion,and beam smoothing of low-coherence light.Then,recent progress achieved by our group in research on a broadband low-coherence laser driver is presented.During the development of our low-coherence high-power laser facility,we have proposed and implemented many key techniques for working with low-coherence light,including source generation,efficient amplification and propagation,harmonic conversion,beam smoothing,and precise beam control.Based on a series of technological breakthroughs,a kilojoule low-coherence laser driver named Kunwu with a coherence time of only 300 fs has been built,and the first round of physical experiments has been completed.This high-power laser facility provides not only a demonstration and verification platform for key techniques and system integration of a low-coherence laser driver,but also a new type of experimental platform for research into,for example,high-energy-density physics and,in particular,laser–plasma interactions.展开更多
In this paper, we review the status of the multifunctional experimental platform at the National Laboratory of High Power Laser and Physics(NLHPLP). The platform, including the SG-II laser facility, SG-II 9th beam, SG...In this paper, we review the status of the multifunctional experimental platform at the National Laboratory of High Power Laser and Physics(NLHPLP). The platform, including the SG-II laser facility, SG-II 9th beam, SG-II upgrade(SG-II UP) facility, and SG-II 5 PW facility, is operational and available for interested scientists studying inertial confinement fusion(ICF) and a broad range of high-energy-density physics. These facilities can provide important experimental capabilities by combining different pulse widths of nanosecond, picosecond, and femtosecond scales. In addition, the SG-II UP facility, consisting of a single petawatt system and an eight-beam nanosecond system, is introduced including several laser technologies that have been developed to ensure the performance of the facility. Recent developments of the SG-II 5 PW facility are also presented.展开更多
As the key part for energy amplification of high-power laser systems,disk amplifiers must work in an extremely clean environment.Different from the traditional cleanliness control scheme of active intake and passive e...As the key part for energy amplification of high-power laser systems,disk amplifiers must work in an extremely clean environment.Different from the traditional cleanliness control scheme of active intake and passive exhaust(AIPE),a new method of active exhaust and passive intake(AEPI)is proposed in this paper.Combined with computational fluid dynamics(CFD)technology,through the optimization design of the sizes,shapes,and locations of different outlets and inlets,the turbulence that is unfavorable to cleanliness control is effectively avoided in the disk amplifier cavity during the process of AEPI.Finally,the cleanliness control of the cavity of the disk amplifier can be realized just by once exhaust.Meanwhile,the micro negative pressure environment in the amplifier cavity produced during the exhaust process reduces the requirement for sealing.This method is simple,time saving,gas saving,efficient,and safe.It is also suitable for the cleanliness control of similar amplifiers.展开更多
The spatial resolved method, which measures the laser-induced damage fluence by identifying the location of the damage point in the Gaussian beam three-dimensional direction, is demonstrated. The advantages and practi...The spatial resolved method, which measures the laser-induced damage fluence by identifying the location of the damage point in the Gaussian beam three-dimensional direction, is demonstrated. The advantages and practicality of this method have been explained. Taking a triple frequency beam splitter as an example, the defect damage fluence can be accurately calculated by the spatial resolved method. The different defect damage performance of the triple frequency splitter is distinguished under irradiations of only the 355 and 532 nm lasers. The spatial resolved method provides a way to obtain precise information of optical film defect information.展开更多
基金supported by State Grid science and Technology Project(Grant No.5700-202127198A-0-0-00)。
文摘Optical nanofiber(ONF)is a special tool to achieve the interaction between light and matter with ultralow power.In this paper,we demonstrate V-type electromagnetically induced transparency(EIT)in cold atoms trapped by an ONFbased two-color optical lattice.At an optical depth of 7.35,90%transmission can be achieved by only 7.7 pW coupling power.The EIT peak and linewidth are investigated as a function of the coupling optical power.By modulating the pWlevel control beam of the ONF-EIT system in sequence,we further achieve efficient and high contrast control of the probe transmission,as well as its potential application in the field of quantum communication and quantum information science by using one-dimensional atomic chains.
文摘The use of low-coherence light is expected to be one of the effective ways to suppress or even eliminate the laser–plasma instabilities that arise in attempts to achieve inertial confinement fusion.In this paper,a review of low-coherence high-power laser drivers and related key techniques is first presented.Work at typical low-coherence laser facilities,including Gekko XII,PHEBUS,Pharos III,and Kanal-2 is described.The many key techniques that are used in the research and development of low-coherence laser drivers are described and analyzed,including low-coherence source generation,amplification,harmonic conversion,and beam smoothing of low-coherence light.Then,recent progress achieved by our group in research on a broadband low-coherence laser driver is presented.During the development of our low-coherence high-power laser facility,we have proposed and implemented many key techniques for working with low-coherence light,including source generation,efficient amplification and propagation,harmonic conversion,beam smoothing,and precise beam control.Based on a series of technological breakthroughs,a kilojoule low-coherence laser driver named Kunwu with a coherence time of only 300 fs has been built,and the first round of physical experiments has been completed.This high-power laser facility provides not only a demonstration and verification platform for key techniques and system integration of a low-coherence laser driver,but also a new type of experimental platform for research into,for example,high-energy-density physics and,in particular,laser–plasma interactions.
基金supported by International Partnership Program of Chinese Academy of Sciences(No.181231KYSB20170022)the Key Projects of International Cooperation in Chinese Academy of Sciences
文摘In this paper, we review the status of the multifunctional experimental platform at the National Laboratory of High Power Laser and Physics(NLHPLP). The platform, including the SG-II laser facility, SG-II 9th beam, SG-II upgrade(SG-II UP) facility, and SG-II 5 PW facility, is operational and available for interested scientists studying inertial confinement fusion(ICF) and a broad range of high-energy-density physics. These facilities can provide important experimental capabilities by combining different pulse widths of nanosecond, picosecond, and femtosecond scales. In addition, the SG-II UP facility, consisting of a single petawatt system and an eight-beam nanosecond system, is introduced including several laser technologies that have been developed to ensure the performance of the facility. Recent developments of the SG-II 5 PW facility are also presented.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA25020101)。
文摘As the key part for energy amplification of high-power laser systems,disk amplifiers must work in an extremely clean environment.Different from the traditional cleanliness control scheme of active intake and passive exhaust(AIPE),a new method of active exhaust and passive intake(AEPI)is proposed in this paper.Combined with computational fluid dynamics(CFD)technology,through the optimization design of the sizes,shapes,and locations of different outlets and inlets,the turbulence that is unfavorable to cleanliness control is effectively avoided in the disk amplifier cavity during the process of AEPI.Finally,the cleanliness control of the cavity of the disk amplifier can be realized just by once exhaust.Meanwhile,the micro negative pressure environment in the amplifier cavity produced during the exhaust process reduces the requirement for sealing.This method is simple,time saving,gas saving,efficient,and safe.It is also suitable for the cleanliness control of similar amplifiers.
基金supported by the National Natural Science Foundation of China(No.4317)the National Key Research and Development Project of China(No.2016YFE0104300)
文摘The spatial resolved method, which measures the laser-induced damage fluence by identifying the location of the damage point in the Gaussian beam three-dimensional direction, is demonstrated. The advantages and practicality of this method have been explained. Taking a triple frequency beam splitter as an example, the defect damage fluence can be accurately calculated by the spatial resolved method. The different defect damage performance of the triple frequency splitter is distinguished under irradiations of only the 355 and 532 nm lasers. The spatial resolved method provides a way to obtain precise information of optical film defect information.