The low carbon Nb-Ti mieroalloyed tested steel was prepared by the process of vacuum induction furnace smelting, forging and hot rolling. The new steel aims to meet the demand of high strength, high toughness and high...The low carbon Nb-Ti mieroalloyed tested steel was prepared by the process of vacuum induction furnace smelting, forging and hot rolling. The new steel aims to meet the demand of high strength, high toughness and high plasticity for building facilities. The effects of quenching process on microstructure and mechanical properties of tested steel were investigated. The results showed that prior austenite grain size, phase type and precipitation behavior of （ Nb, Ti） （ C, N） play important roles in mechanical properties of the steel. Through modified appropriately, the model of austenite grain growth during heating and holding is d^5.7778 = 5. 6478^5.7778 ＋ 7.04 × 10^22t^1.6136 exp（- 427. 15 ×10^3 /（RT））. The grain growth activation energy is Qg = 427. 15 kJ. During quenching, the microscopic structures are mainly martensite and lath bainite which contains lots of lath substructure and dislocations. The content of phases, fine and coarsening （ Nb, Ti ） （ C, N ） precipitated changes during different quenching temperatures and holding time. Finally compared with the hardness value, the best quenching process can be obtained that heating temperature and holding time are 900 ℃ and 50 mins, respectively.展开更多
The newly designed high performance tested steel was prepared by the process of vacuum induction furnace smelting and forging. According to the ideas of online relaxation and quenching intercritieal quenching-temperi...The newly designed high performance tested steel was prepared by the process of vacuum induction furnace smelting and forging. According to the ideas of online relaxation and quenching intercritieal quenching-tempering （Q- L-T） process, effects of offline relaxation process on microstructure and mechanical properties of the tested steel were investigated. Offline results process was simulated using the MMS-300 thermal simulation testing apparatus and heat treating furnace. The results show that the microstructures are composed of bainite and martensite when the specimens are quenched in the austenite region. Once the specimens are ai〉cooled into the dual phase region, ferrite and granular bainite start to form. In the relaxation process, fine Nb（C, N） carbonitrides are precipitated first and then grow and coarsen. The microstructure is affected by process and determines mechanical properties. The Vickers hardness and yield strength （YS） first rise then fall when the relaxation temperature drops in austenite region, and then decline dramatically in dual phase region. When the relaxation time is 20 s, the tensile strength reaches the peak （1034 MPa）, and at that time YS is 872 MPa, elongation is 17.7% and Charpy V-notch impact energy is 171 J at -20℃. When the relaxation time increases to 100 s, the yield and tensile strengths are 750 and 934 MPa respectively, elon- gation is 18.6% and Charpy V-notch impact energy is 165 J at -20℃.展开更多
基金Sponsored by the Major State Basic Research Development Program of China(Grant No.2010CB630801)
文摘The low carbon Nb-Ti mieroalloyed tested steel was prepared by the process of vacuum induction furnace smelting, forging and hot rolling. The new steel aims to meet the demand of high strength, high toughness and high plasticity for building facilities. The effects of quenching process on microstructure and mechanical properties of tested steel were investigated. The results showed that prior austenite grain size, phase type and precipitation behavior of （ Nb, Ti） （ C, N） play important roles in mechanical properties of the steel. Through modified appropriately, the model of austenite grain growth during heating and holding is d^5.7778 = 5. 6478^5.7778 ＋ 7.04 × 10^22t^1.6136 exp（- 427. 15 ×10^3 /（RT））. The grain growth activation energy is Qg = 427. 15 kJ. During quenching, the microscopic structures are mainly martensite and lath bainite which contains lots of lath substructure and dislocations. The content of phases, fine and coarsening （ Nb, Ti ） （ C, N ） precipitated changes during different quenching temperatures and holding time. Finally compared with the hardness value, the best quenching process can be obtained that heating temperature and holding time are 900 ℃ and 50 mins, respectively.
基金Item Sponsored by National Basic Research Program(973Program)of China(2010CB630801)
文摘The newly designed high performance tested steel was prepared by the process of vacuum induction furnace smelting and forging. According to the ideas of online relaxation and quenching intercritieal quenching-tempering （Q- L-T） process, effects of offline relaxation process on microstructure and mechanical properties of the tested steel were investigated. Offline results process was simulated using the MMS-300 thermal simulation testing apparatus and heat treating furnace. The results show that the microstructures are composed of bainite and martensite when the specimens are quenched in the austenite region. Once the specimens are ai〉cooled into the dual phase region, ferrite and granular bainite start to form. In the relaxation process, fine Nb（C, N） carbonitrides are precipitated first and then grow and coarsen. The microstructure is affected by process and determines mechanical properties. The Vickers hardness and yield strength （YS） first rise then fall when the relaxation temperature drops in austenite region, and then decline dramatically in dual phase region. When the relaxation time is 20 s, the tensile strength reaches the peak （1034 MPa）, and at that time YS is 872 MPa, elongation is 17.7% and Charpy V-notch impact energy is 171 J at -20℃. When the relaxation time increases to 100 s, the yield and tensile strengths are 750 and 934 MPa respectively, elon- gation is 18.6% and Charpy V-notch impact energy is 165 J at -20℃.
