Periodontal disease is an inflammatory and destructive disease of periodontal support tissue caused by microorganisms in dental plaque. During the development of periodontal disease, host immune regulation plays an im...Periodontal disease is an inflammatory and destructive disease of periodontal support tissue caused by microorganisms in dental plaque. During the development of periodontal disease, host immune regulation plays an important role, and unnecessary excessive immune regulation often exacerbates the course of chronic periodontal disease. Mesenchymal stem cells (MSCs) are adult stem cells with self replication ability and multi-directional differentiation potential. Many studies have found that MSCs have strong immunosuppressive effects on both adaptive and innate immunity. In recent years, literature has reported that MSCs are involved in the immune regulatory effect of chronic periodontal disease, inhibiting its inflammatory response and alveolar bone resorption, but the specific regulatory mechanism has not been elucidated. This article reviews the current research status of the immune regulatory effects of MSCs on chronic periodontitis.展开更多
Tongue squamous cell carcinoma (TSCC) is the most invasive type of oral malignant tumor, posing a serious threat to human life and health. Its pathogenesis is complex and has a high degree of malignancy. Recurrence an...Tongue squamous cell carcinoma (TSCC) is the most invasive type of oral malignant tumor, posing a serious threat to human life and health. Its pathogenesis is complex and has a high degree of malignancy. Recurrence and metastasis often lead to poor prognosis. MicroRNAs are a type of single stranded small molecule RNA with only 18 - 25 nucleotides, which can regulate the expression of various genes and participate in the occurrence and development of tumors. Studies have found that microRNA expression profiling can serve as a reliable and stable biological indicator for early diagnosis and prognosis of tumors. This article provides a review of the research status of MicroRNAs in squamous cell carcinoma of the tongue.展开更多
Compared with traditional plastic forming,ultrasonic vibration plastic forming has the advantages of reducing the forming force and improving the surface quality of the workpiece.This technology has a very broad appli...Compared with traditional plastic forming,ultrasonic vibration plastic forming has the advantages of reducing the forming force and improving the surface quality of the workpiece.This technology has a very broad application prospect in industrial manufactur-ing.Researchers have conducted extensive research on the ultrasonic vibration plastic forming of metals and laid a deep foundation for the development of this field.In this review,metals were classified according to their crystal structures.The effects of ultrasonic vibration on the microstructure of face-centered cubic,body-centered cubic,and hexagonal close-packed metals during plastic forming and the mech-anism underlying ultrasonic vibration forming were reviewed.The main challenges and future research direction of the ultrasonic vibra-tion plastic forming of metals were also discussed.展开更多
This paper considers the rational expectations model with multiplicative noise and input delay,where the system dynamics rely on the conditional expectations of future states.The main contribution is to obtain a suffi...This paper considers the rational expectations model with multiplicative noise and input delay,where the system dynamics rely on the conditional expectations of future states.The main contribution is to obtain a sufficient condition for the exact controllability of the rational expectations model.In particular,we derive a sufficient Gramian matrix condition and a rank condition for the delay-free case.The key is the solvability of the backward stochastic difference equations with input delay which is derived from the forward and backward stochastic system.展开更多
To reveal the response mechanism of soil microbial community in different planting systems of sweet potato,the effects of rotation and intercropping on microbial community structure and carbon source utilization capac...To reveal the response mechanism of soil microbial community in different planting systems of sweet potato,the effects of rotation and intercropping on microbial community structure and carbon source utilization capacities of sweet potato rhizosphere soil were studied by using phospholipid fatty acid(PLFA)and ecological board(BIOLOG ECO)through field positioning experiments.In this study,three treatments were sweet potato continuous cropping,sweet potato-wheat rotation,and sweet potato-corn intercropping.The main results showed that compared with the sweet potato continuous cropping treatment,sweet potato rotation and intercropping changed the PLFA biomass of soil microorganisms;the contents of bacteria increased by 21.82%and 38.77%,respectively(P<0.05);the contents of actinomycetes increased by 6.98%and 12.77%,and the biomass of Gram-positive bacteria increased by 28.60%and 63.44%,respectively;and the biomass of Gram-negative bacteria increased by 18.21%and 22.29%,and the fungal contents decreased by 16.60%and 13.03%,respectively.With the extension of culture time,the average well color development(AWCD value)of sweet potato-corn intercropping was significantly higher than other two treatments.The utilization capacities of carboxylic acid compounds,polymers,carbohydrates,amino acids,and amines in the sweet potato-corn intercropping treatment were significantly increased by 17.28%,14.67%,54.17%,36.62%,and 20.00%,respectively,compared with the sweet potato continuous cropping treatment.The results of the multivariate analysis(RDA)showed that the changes of soil microbial community structure and functional diversity were controlled by many factors,and the soil available potassium and total nitrogen were the main driving factors.However,sweet potato-wheat rotation and sweet potato-corn intercropping could optimize the soil microbial community structure and enhance the microbial functional diversity,and the effect of sweet potato-corn intercropping treatment was better.展开更多
As a key safety component of the high-speed train, fatigue fracture of the axle would lead to major accidents such as derailment or overturning. The complexity of the axle dynamic stress test seriously enhances the di...As a key safety component of the high-speed train, fatigue fracture of the axle would lead to major accidents such as derailment or overturning. The complexity of the axle dynamic stress test seriously enhances the difficulty of axle fatigue damage analysis. In this paper, the dynamic stress test of the high-speed train axle was carried out,the axle box acceleration was monitored on-track during the test, and the relationship between the axle stress spectrum and acceleration was analyzed on-track. The results show that the relationships between the axle equivalent stresses and the Root Mean Square(RMS) values of the axle box vertical acceleration and lateral acceleration exhibit a strong joint probability density distribution. The concept of the virtual surface density of wheel-rail contact is also proposed to realize the purpose of using axle box acceleration to deduce axle equivalent force. The results quantify the relationship between axle box acceleration and axle equivalent force, provide a new method for predicting the axle damage using the acceleration RMS values, and open up a new approach for structural health monitoring of high-speed train axles.展开更多
Objective: This study assessed the incidence, mortality, and pathogens associated with nosocomial neonatal sepsis (NNS) in Shaanxi Province to improve the prevention and control of NNS. Methods: Nine large neonatal de...Objective: This study assessed the incidence, mortality, and pathogens associated with nosocomial neonatal sepsis (NNS) in Shaanxi Province to improve the prevention and control of NNS. Methods: Nine large neonatal departments in Shaanxi Province participated in this retrospective epidemiological investigation of NNS during the period of 2008-2010, using standardized protocol. The incidence, mortality, pathogens, antibiotic sensitivity, clinical characteristics, prognosis, and costs were analyzed. Results: Of 16,642 neonates admitted to neonatal departments in the 9 hospitals during 2008-2010, there were 139 cases of NNS, with incidence of 8.3% and mortality of 20.8%. The predominant pathogens were Gram-negative bacteria, accounting for 67.6% of positive cultures. Gram-positive bacteria accounted for 24.5% and fungal infection accounted for 7.9%. The most common Gram-negative species were Klebsiella pneumonia (22.3%), Escherichia coli (15.1%), and Enterobacter cloacae (8.6%). The dominant Gram-positive species identified were coagulase negative staphylococcal species (CONS) (8.6%), followed by Staphylococcus aureus (7.9%). The recovered bacterial pathogens demonstrated varying antibiotic resistance, but no meropenem-or-vancomycin-resistant strains were detected. Preterm and full-term infants showed significant difference in clinical manifestations, laboratory findings, mortality, and cost. Conclusion: NNS in the hospitals of Shaanxi Province showed a decreasing trend from 2008 to 2010, but the mortality did not reduce significantly. The predominant bacteria were Gram negative, and pathogens were found to have varying antibiotic resistance. The preterm group had higher mortality and costs than the full-term infants. Therefore, effective measures should be taken to control NNS, especially in preterm infants.展开更多
Semaphorin 3A could be involved in angiogenesis and also enhanced bone formation was investigated in many researches. In our current study, we firstly investigated that canal obliteration might be present in some rege...Semaphorin 3A could be involved in angiogenesis and also enhanced bone formation was investigated in many researches. In our current study, we firstly investigated that canal obliteration might be present in some regenerative endodontic procedures cases clinically. After the establishment of the model of apical periodontitis in the maxillary first molars of rats, pulp revascularization was performed in mesial root canal. Histological sections showed that most of the tissues growing into the root canal were not real pulp tissue, but cementoid, osteoid and periodontal-like membrane. Moreover, we detected that the expression of Semaphorin 3A increased in the mesial root canal. When we used CoCl<sub>2</sub> to induce hypoxic environment, the expression of genes and proteins, Hypoxia inducible factor-1α, Vascular endothelial growth factor, and Semaphorin 3A in dental pulp stem cells were both upregulated. In conclusion, hypoxia mediated the high expression of Semaphorin 3A in DPSC might be involved tissue regeneration during pulp vascularization.展开更多
Dysregulated expression of microRNAs (miRNAs) in various tissues has been associated with a variety of diseases, including cancers. Here we demonstrate that miRNAs are present in the serum and plasma of humans and o...Dysregulated expression of microRNAs (miRNAs) in various tissues has been associated with a variety of diseases, including cancers. Here we demonstrate that miRNAs are present in the serum and plasma of humans and other animals such as mice, rats, bovine fetuses, calves, and horses. The levels of miRNAs in serum are stable, reproducible, and consistent among individuals of the same species. Employing Solexa, we sequenced all serum miRNAs of healthy Chinese subjects and found over 100 and 91 serum miRNAs in male and female subjects, respectively. We also identified specific expression patterns of serum miRNAs for lung cancer, colorectal cancer, and diabetes, providing evidence that serum miRNAs contain fingerprints for various diseases. Two non-small cell lung cancer-specific serum miRNAs obtained by Solexa were further validated in an independent trial of 75 healthy donors and 152 cancer patients, using quantitative reverse transcription polymerase chain reaction assays. Through these analyses, we conclude that serum miRNAs can serve as potential biomarkers for the detection of various cancers and other diseases.展开更多
Rose is sensitive to high temperature which will make the rose go into a semi-dormancy state.Grafting is an excellent way to enhance rose heat tolerance.Here,heat-tolerant Rosa multiflora‘Huanong Wuci 1'(W)and he...Rose is sensitive to high temperature which will make the rose go into a semi-dormancy state.Grafting is an excellent way to enhance rose heat tolerance.Here,heat-tolerant Rosa multiflora‘Huanong Wuci 1'(W)and heat-sensitive Rosa chinensis‘Old Blush’(X)were selected as experimental materials.The RNA-seq technique was used to investigate the transcriptomes of self-root grafting line(XX0),heterogeneous grafting line(XW0),self-root grafting line under 6 h heat stress(XX6),and heterogeneous grafting line under 6 h heat stress(XW6).Under high temperature stress,multiple signaling pathways were activated,moreover,a large number of transcription factors and functional genes were induced,especially the HSFs and HSPs with remarkably upregulated expression levels.The GO analysis showed that the differences in the expressions of the genes related to fatty acids and carbohydrates were observed between self-root grafting line and heterogeneous grafting line.In addition,14 P450s were differentially expressed,and one lectin gene was up-regulated in XW0 vs XW6,but down-regulated in XX0 vs XX6.Considering physiological and biochemical traits such as relative electrolyte leakage,SOD activity,proline,and total soluble sugars,DEGs involved in these processes may be key factors to resist high temperature.The present study provides an insight into the complex mechanism underlying grafting in response to heat stress.Our results indicate that grafting is an effective way to improve rose heat resistance.展开更多
The Mars Ion and Neutral Particle Analyzer(MINPA)is one of the three scientific instruments onboard the Tianwen-1 orbiter to investigate the Martian space environment.During Tianwen-1’s transfer orbit to Mars,the MIN...The Mars Ion and Neutral Particle Analyzer(MINPA)is one of the three scientific instruments onboard the Tianwen-1 orbiter to investigate the Martian space environment.During Tianwen-1’s transfer orbit to Mars,the MINPA was switched on to measure the solar wind ions.Here,we present the first results of the MINPA observations in the solar wind.During cruise,nearly half of the MINPA ion field-of-view(FOV)was blocked by the lander capsule;thus only the solar-wind ions with azimuthal speeds pointing towards the unblocked FOV sectors could be detected.We perform a detailed comparison of the MINPA’s solar wind observations with data from Earth-based missions when MINPA reached its count-rate peak,finding a general consistency of the ion moments between them.The blocking effect due to the lander is evaluated quantitatively under varying solar-wind velocity conditions.Despite the blocking effect,the MINPA’s solar wind measurements during the transfer orbit suggest a good performance.展开更多
A new continuum model is developed to study the influence of surface stress on the behaviors of piezoelectric nanobeams. Different from existing piezoelectric surface models which only consider the surface properties,...A new continuum model is developed to study the influence of surface stress on the behaviors of piezoelectric nanobeams. Different from existing piezoelectric surface models which only consider the surface properties, the proposed model takes surfaceinduced initial fields into consideration. Due to the fact that the surface-induced initial fields are totally different under various boundary conditions, two kinds of beams, the doubly-clamped beam and the cantilever beam, are analyzed. Furthermore, boundary conditions can affect not only the initial state of the piezoelectric nanobeam but also the forms of the governing equations. Based on the Euler-Bernoulli beam theory, the nonlin- ear Green-Lagrangian strain-displacement relationship is applied. In addition, the surface area change is also considered in the proposed model. The governing equations of the doubly-clamped and cantilever beams are derived by the energy variation principle. Com- pared with existing Young-Laplace models, the proposed model for the doubly-clamped beam is similar to the Young-Laplace models. However~ the governing equation of the cantilever beam derived by the proposed model is very different from that derived by the Young-Laplace models. The behaviors of piezoelectric nanobeams predicted by these two models Mso have significant discrepancies, which is owing to the surface-induced initial fields in the bulk beam.展开更多
The main objective of the Mars Ion and Neutral Particle Analyzer(MINPA)aboard the Chinese Mars Exploration Mission(Tianwen-1)is to study the solar wind-Mars interaction by measuring the ions and energetic neutral atom...The main objective of the Mars Ion and Neutral Particle Analyzer(MINPA)aboard the Chinese Mars Exploration Mission(Tianwen-1)is to study the solar wind-Mars interaction by measuring the ions and energetic neutral atoms(ENAs)near Mars.The MINPA integrates ion and ENA measurements into one sensor head,sharing the same electronics box.The MINPA utilizes a standard toroidal top-hat electrostatic analyzer(ESA)followed by a time of flight(TOF)unit to provide measurement of ions with energies from 2.8 eV to 25.9 keV and ENAs from 50 eV to 3 keV with a base time resolution of 4 seconds.Highly polished silicon single crystal substrates with an Al2O3 film coating are used to ionize the ENAs into positive ions.These ions can then be analyzed by the ESA and TOF,to determine the energy and masses of the ENAs.The MINPA provides a 360°×90°field of view(FOV)with 22.5°×5.4°angular resolution for ion measurement,and a 360°×9.7°FOV with 22.5°×9.7°angular resolution for ENA measurement.The TOF unit combines a-15 kV acceleration high voltage with ultra-thin carbon foils to resolve H+,He2+,He+,O+,O2+and CO2+for ion measurement and to resolve H and O(≥16 amu group)for ENA measurement.Here we present the design principle and describe our ground calibration of the MINPA.展开更多
During the braking process,a large amount of heat energy is generated at the friction surfaces between the brake disc and pads and rapidly dissipates into the disc volume.In this paper,a three-dimensional thermo-mecha...During the braking process,a large amount of heat energy is generated at the friction surfaces between the brake disc and pads and rapidly dissipates into the disc volume.In this paper,a three-dimensional thermo-mechanical coupling model of high-speed wheel-mounted brake discs containing bolted joints and contact relationships is established.The direct coupling method is used to analyze the temperature and stress of the brake discs during an emergency braking event with an initial speed of 300 km/h.A full-scale bench test is also conducted to monitor the temperatures of the friction ring and bolted joints.The simulation result shows that the surface temperature of the friction ring reaches its peak value of 414°C after 102 s of braking,which agrees well with the bench test result.The maximum alternating thermal stress occurs in the bolt hole where the maximum circumferential compressive stress is−658 MPa and the maximum circumferential tensile stress is 134 MPa.During the braking process,the out-of-plane deformation of the middle part of the friction ring is larger than that of the edge,which increases the axial tensile load of the connecting bolt.This work provides support for the design of brake discs and connecting bolts.展开更多
The aboveground biomass(AGB)of shrubs and small trees is the main component for the productivity and carbon storage of understory vegetation in subtropical secondary forests.However,few allometric models exist to accu...The aboveground biomass(AGB)of shrubs and small trees is the main component for the productivity and carbon storage of understory vegetation in subtropical secondary forests.However,few allometric models exist to accurately evaluate understory biomass.To estimate the AGB of five common shrub(diameter at base<5 cm,<5 m high)and one small tree species(<8 m high,trees’s seedling),206 individuals were harvested and species-specific and multi-species allometric models developed based on four predictors,height(H),stem diameter(D),crown area(Ca),and wood density(ρ).As expected,the six species possessed greater biomass in their stems compared with branches,with the lowest biomass in the leaves.Species-specific allometric models that employed stem diameter and the combined variables of D~2H andρDH as predictors accurately estimated the components and total AGB,with R^(2) values from 0.602 and 0.971.A multi-species shrub allometric model revealed that wood density×diameter×height(ρDH)was the best predictor,with R^(2) values ranging from between 0.81 and 0.89 for the components and total AGB,respectively.These results indicated that height(H)and diameter(D)were effective predictors for the models to estimate the AGB of the six species,and the introduction of wood density(ρ)improved their accuracy.The optimal models selected in this study could be applied to estimate the biomass of shrubs and small trees in subtropical regions.展开更多
Photocatalytic hydrogen peroxide(H_(2)O_(2))production is a promising strategy to replace the traditional production processes;however,the inefficient H_(2)O_(2) productivity limits its application.In this study,oxyge...Photocatalytic hydrogen peroxide(H_(2)O_(2))production is a promising strategy to replace the traditional production processes;however,the inefficient H_(2)O_(2) productivity limits its application.In this study,oxygen-rich g-C_(3)N_(4) with abundant nitrogen vacancies(OCN)was synthesized for photocatalytic H_(2)O_(2) production.X-ray photoelectron spectroscopy and Fourier-transform infrared spectroscopy indicated that oxygen-containing functional groups(–COOH and C–O–C)were obtained.Electron paramagnetic resonance confirmed the successful introduction of nitrogen vacancies.OCN exhibited efficient photocatalytic H_(2)O_(2) production performance of 1965μmol L^(−1) h^(−1) in air under visible-light irradiation.The high H_(2)O_(2) production was attributed to the enhanced adsorption of oxygen,enlarged specific surface area,and promoted carrier separation.An increased H_(2)O_(2) production rate(5781μmol L^(−1) h^(−1))was achieved in a Na_(3)PO_(4) solution.The improved performance was attributed to the changed reactive oxygen species.Specifically,the adsorbed PO_(4)^(3−) on the surface of the OCN promoted the transfer of holes to the catalyst surface.•O_(2)−obtained by O_(2) reduction reacted with adjacent holes to generate 1O_(2),which could efficiently generate H_(2)O_(2) with isopropanol.Additionally,PO_(4)^(3−),as a stabilizer,inhibited the decomposition of H_(2)O_(2).展开更多
Tracking moving wideband sound sources is one of the most challenging issues in the acoustic array signal processing which is based on the direction of arrival(DOA) estimation. Compressive sensing(CS) is a recent theo...Tracking moving wideband sound sources is one of the most challenging issues in the acoustic array signal processing which is based on the direction of arrival(DOA) estimation. Compressive sensing(CS) is a recent theory exploring the signal sparsity representation, which has been proved to be superior for the DOA estimation. However, the spatial aliasing and the offset at endfire are the main obstacles for CS applied in the wideband DOA estimation. We propose a particle filter based compressive sensing method for tracking moving wideband sound sources. First, the initial DOA estimates are obtained by wideband CS algorithms. Then, the real sources are approximated by a set of particles with different weights assigned. The kernel density estimator is used as the likelihood function of particle filter. We present the results for both uniform and random linear array. Simulation results show that the spatial aliasing is disappeared and the offset at endfire is reduced. We show that the proposed method can achieve satisfactory tracking performance regardless of using uniform or random linear array.展开更多
Planar films of pure and Ti^(4+)-dopedβ-Fe_(2)O_(3)were prepared by a spray pyrolysis method.X-ray diffraction patterns and Raman spectra of the metastableβ-Fe_(2)O_(3)film showed that its thermal stability was sign...Planar films of pure and Ti^(4+)-dopedβ-Fe_(2)O_(3)were prepared by a spray pyrolysis method.X-ray diffraction patterns and Raman spectra of the metastableβ-Fe_(2)O_(3)film showed that its thermal stability was significantly improved because of covalent bonds in the interfaces between the film and substrate,while only weak Van der Waals bonds existed at the interfaces within the particle-assembledβ-Fe_(2)O_(3)film prepared by electrophoretic deposition.The as-prepared planar films were thus able to withstand higher annealing temperature and stronger laser irradiation power in comparison with theβ-Fe_(2)O_(3)particle-assembly.Ti^(4+)doping was used to increase the concentration of carriers in the metastableβ-Fe_(2)O_(3)film.Compared with pureβ-Fe_(2)O_(3)photoanodes,the highest saturated photocurrent for water splitting over the Ti^(4+)-dopedβ-Fe_(2)O_(3)photoanode was increased by a factor of approximately three.Theβ-Fe_(2)O_(3)photoanode exhibited photochemical stability for water splitting for a duration exceeding 100 h,which indicates its important potential application in solar energy conversion.展开更多
The uplink of mobile satellite communication(MSC) system with hundreds of spot beams is essentially a multiple-input multiple-output(MIMO) channel. Dual-turbo iterative detection and decoding as a kind of MIMO receive...The uplink of mobile satellite communication(MSC) system with hundreds of spot beams is essentially a multiple-input multiple-output(MIMO) channel. Dual-turbo iterative detection and decoding as a kind of MIMO receiver, which exchanges soft extrinsic information between a soft-in soft-out(SISO) detector and an SISO decoder in an iterative fashion, is an efficient method to reduce the uplink inter-beam-interference(IBI),and so the receiving bit error rate(BER).We propose to replace the linear SISO detector of traditional dual-turbo iterative detection and decoding with the AMP detector for the low-density parity-check(LDPC) coded multibeam MSC uplink. This improvement can reduce the computational complexity and achieve much lower BER.展开更多
文摘Periodontal disease is an inflammatory and destructive disease of periodontal support tissue caused by microorganisms in dental plaque. During the development of periodontal disease, host immune regulation plays an important role, and unnecessary excessive immune regulation often exacerbates the course of chronic periodontal disease. Mesenchymal stem cells (MSCs) are adult stem cells with self replication ability and multi-directional differentiation potential. Many studies have found that MSCs have strong immunosuppressive effects on both adaptive and innate immunity. In recent years, literature has reported that MSCs are involved in the immune regulatory effect of chronic periodontal disease, inhibiting its inflammatory response and alveolar bone resorption, but the specific regulatory mechanism has not been elucidated. This article reviews the current research status of the immune regulatory effects of MSCs on chronic periodontitis.
文摘Tongue squamous cell carcinoma (TSCC) is the most invasive type of oral malignant tumor, posing a serious threat to human life and health. Its pathogenesis is complex and has a high degree of malignancy. Recurrence and metastasis often lead to poor prognosis. MicroRNAs are a type of single stranded small molecule RNA with only 18 - 25 nucleotides, which can regulate the expression of various genes and participate in the occurrence and development of tumors. Studies have found that microRNA expression profiling can serve as a reliable and stable biological indicator for early diagnosis and prognosis of tumors. This article provides a review of the research status of MicroRNAs in squamous cell carcinoma of the tongue.
基金supported by the National Key R&D Program of China(No.2022YFE0121300)the Introduction Plan for High end Foreign Experts,China(No.G2023105001L)the Young Foreign Talent Program,China(No.QN2023105001L).
文摘Compared with traditional plastic forming,ultrasonic vibration plastic forming has the advantages of reducing the forming force and improving the surface quality of the workpiece.This technology has a very broad application prospect in industrial manufactur-ing.Researchers have conducted extensive research on the ultrasonic vibration plastic forming of metals and laid a deep foundation for the development of this field.In this review,metals were classified according to their crystal structures.The effects of ultrasonic vibration on the microstructure of face-centered cubic,body-centered cubic,and hexagonal close-packed metals during plastic forming and the mech-anism underlying ultrasonic vibration forming were reviewed.The main challenges and future research direction of the ultrasonic vibra-tion plastic forming of metals were also discussed.
基金supported by the National Natural Science Foundation of China under Grants 61821004,62250056,62350710214,U23A20325,62350055the Natural Science Foundation of Shandong Province,China(ZR2021ZD14,ZR2021JQ24)+2 种基金High-level Talent Team Project of Qingdao West Coast New Area,China(RCTD-JC-2019-05)Key Research and Development Program of Shandong Province,China(2020CXGC01208)Science and Technology Project of Qingdao West Coast New Area,China(2019-32,2020-20,2020-1-4).
文摘This paper considers the rational expectations model with multiplicative noise and input delay,where the system dynamics rely on the conditional expectations of future states.The main contribution is to obtain a sufficient condition for the exact controllability of the rational expectations model.In particular,we derive a sufficient Gramian matrix condition and a rank condition for the delay-free case.The key is the solvability of the backward stochastic difference equations with input delay which is derived from the forward and backward stochastic system.
基金Supported by National Modern Agricultural Industry Technology System Construction Project(CARS-10-C12-2020).Qiguo HU(1982-)male+2 种基金P.R.Chinaassociate researcherdevoted to research about breeding and utilization of new sweet potato varieties。
文摘To reveal the response mechanism of soil microbial community in different planting systems of sweet potato,the effects of rotation and intercropping on microbial community structure and carbon source utilization capacities of sweet potato rhizosphere soil were studied by using phospholipid fatty acid(PLFA)and ecological board(BIOLOG ECO)through field positioning experiments.In this study,three treatments were sweet potato continuous cropping,sweet potato-wheat rotation,and sweet potato-corn intercropping.The main results showed that compared with the sweet potato continuous cropping treatment,sweet potato rotation and intercropping changed the PLFA biomass of soil microorganisms;the contents of bacteria increased by 21.82%and 38.77%,respectively(P<0.05);the contents of actinomycetes increased by 6.98%and 12.77%,and the biomass of Gram-positive bacteria increased by 28.60%and 63.44%,respectively;and the biomass of Gram-negative bacteria increased by 18.21%and 22.29%,and the fungal contents decreased by 16.60%and 13.03%,respectively.With the extension of culture time,the average well color development(AWCD value)of sweet potato-corn intercropping was significantly higher than other two treatments.The utilization capacities of carboxylic acid compounds,polymers,carbohydrates,amino acids,and amines in the sweet potato-corn intercropping treatment were significantly increased by 17.28%,14.67%,54.17%,36.62%,and 20.00%,respectively,compared with the sweet potato continuous cropping treatment.The results of the multivariate analysis(RDA)showed that the changes of soil microbial community structure and functional diversity were controlled by many factors,and the soil available potassium and total nitrogen were the main driving factors.However,sweet potato-wheat rotation and sweet potato-corn intercropping could optimize the soil microbial community structure and enhance the microbial functional diversity,and the effect of sweet potato-corn intercropping treatment was better.
基金supported by the National Natural Science Foundation of China(52075032)the Science and Technology Research and Development Program of China State Railway Group Co.,Ltd.(K2022J023).
文摘As a key safety component of the high-speed train, fatigue fracture of the axle would lead to major accidents such as derailment or overturning. The complexity of the axle dynamic stress test seriously enhances the difficulty of axle fatigue damage analysis. In this paper, the dynamic stress test of the high-speed train axle was carried out,the axle box acceleration was monitored on-track during the test, and the relationship between the axle stress spectrum and acceleration was analyzed on-track. The results show that the relationships between the axle equivalent stresses and the Root Mean Square(RMS) values of the axle box vertical acceleration and lateral acceleration exhibit a strong joint probability density distribution. The concept of the virtual surface density of wheel-rail contact is also proposed to realize the purpose of using axle box acceleration to deduce axle equivalent force. The results quantify the relationship between axle box acceleration and axle equivalent force, provide a new method for predicting the axle damage using the acceleration RMS values, and open up a new approach for structural health monitoring of high-speed train axles.
文摘Objective: This study assessed the incidence, mortality, and pathogens associated with nosocomial neonatal sepsis (NNS) in Shaanxi Province to improve the prevention and control of NNS. Methods: Nine large neonatal departments in Shaanxi Province participated in this retrospective epidemiological investigation of NNS during the period of 2008-2010, using standardized protocol. The incidence, mortality, pathogens, antibiotic sensitivity, clinical characteristics, prognosis, and costs were analyzed. Results: Of 16,642 neonates admitted to neonatal departments in the 9 hospitals during 2008-2010, there were 139 cases of NNS, with incidence of 8.3% and mortality of 20.8%. The predominant pathogens were Gram-negative bacteria, accounting for 67.6% of positive cultures. Gram-positive bacteria accounted for 24.5% and fungal infection accounted for 7.9%. The most common Gram-negative species were Klebsiella pneumonia (22.3%), Escherichia coli (15.1%), and Enterobacter cloacae (8.6%). The dominant Gram-positive species identified were coagulase negative staphylococcal species (CONS) (8.6%), followed by Staphylococcus aureus (7.9%). The recovered bacterial pathogens demonstrated varying antibiotic resistance, but no meropenem-or-vancomycin-resistant strains were detected. Preterm and full-term infants showed significant difference in clinical manifestations, laboratory findings, mortality, and cost. Conclusion: NNS in the hospitals of Shaanxi Province showed a decreasing trend from 2008 to 2010, but the mortality did not reduce significantly. The predominant bacteria were Gram negative, and pathogens were found to have varying antibiotic resistance. The preterm group had higher mortality and costs than the full-term infants. Therefore, effective measures should be taken to control NNS, especially in preterm infants.
文摘Semaphorin 3A could be involved in angiogenesis and also enhanced bone formation was investigated in many researches. In our current study, we firstly investigated that canal obliteration might be present in some regenerative endodontic procedures cases clinically. After the establishment of the model of apical periodontitis in the maxillary first molars of rats, pulp revascularization was performed in mesial root canal. Histological sections showed that most of the tissues growing into the root canal were not real pulp tissue, but cementoid, osteoid and periodontal-like membrane. Moreover, we detected that the expression of Semaphorin 3A increased in the mesial root canal. When we used CoCl<sub>2</sub> to induce hypoxic environment, the expression of genes and proteins, Hypoxia inducible factor-1α, Vascular endothelial growth factor, and Semaphorin 3A in dental pulp stem cells were both upregulated. In conclusion, hypoxia mediated the high expression of Semaphorin 3A in DPSC might be involved tissue regeneration during pulp vascularization.
基金Acknowledgments We thank Drs Fengyong Liu and Sheng Luan at UC Berkeley, USA, for their discussion and help with the writing of the manuscript. This work was supported by grants from the National Natural Science Foundation of China (no. 30225037, 30471991, 30570731), National Basic Research Program of China (973 Program) (no. 2006CB503909, 2004CB518603), the "111" Project, and the Natural Science Foundation of Jiangsu Province (no. BK2004082, BK2006714).
文摘Dysregulated expression of microRNAs (miRNAs) in various tissues has been associated with a variety of diseases, including cancers. Here we demonstrate that miRNAs are present in the serum and plasma of humans and other animals such as mice, rats, bovine fetuses, calves, and horses. The levels of miRNAs in serum are stable, reproducible, and consistent among individuals of the same species. Employing Solexa, we sequenced all serum miRNAs of healthy Chinese subjects and found over 100 and 91 serum miRNAs in male and female subjects, respectively. We also identified specific expression patterns of serum miRNAs for lung cancer, colorectal cancer, and diabetes, providing evidence that serum miRNAs contain fingerprints for various diseases. Two non-small cell lung cancer-specific serum miRNAs obtained by Solexa were further validated in an independent trial of 75 healthy donors and 152 cancer patients, using quantitative reverse transcription polymerase chain reaction assays. Through these analyses, we conclude that serum miRNAs can serve as potential biomarkers for the detection of various cancers and other diseases.
基金This research was supported by Grants from National Training Programs of Innovation and Entrepreneurship for Undergraduates(Grant No.201810504048).
文摘Rose is sensitive to high temperature which will make the rose go into a semi-dormancy state.Grafting is an excellent way to enhance rose heat tolerance.Here,heat-tolerant Rosa multiflora‘Huanong Wuci 1'(W)and heat-sensitive Rosa chinensis‘Old Blush’(X)were selected as experimental materials.The RNA-seq technique was used to investigate the transcriptomes of self-root grafting line(XX0),heterogeneous grafting line(XW0),self-root grafting line under 6 h heat stress(XX6),and heterogeneous grafting line under 6 h heat stress(XW6).Under high temperature stress,multiple signaling pathways were activated,moreover,a large number of transcription factors and functional genes were induced,especially the HSFs and HSPs with remarkably upregulated expression levels.The GO analysis showed that the differences in the expressions of the genes related to fatty acids and carbohydrates were observed between self-root grafting line and heterogeneous grafting line.In addition,14 P450s were differentially expressed,and one lectin gene was up-regulated in XW0 vs XW6,but down-regulated in XX0 vs XX6.Considering physiological and biochemical traits such as relative electrolyte leakage,SOD activity,proline,and total soluble sugars,DEGs involved in these processes may be key factors to resist high temperature.The present study provides an insight into the complex mechanism underlying grafting in response to heat stress.Our results indicate that grafting is an effective way to improve rose heat resistance.
基金supported by the Key Research Program of the Chinese Academy of Sciences(Grant NO.ZDBS-SSW-TLC00103)Strategic Priority Research Program(B)of the Chinese Academy of Sciences(XDB41000000)+3 种基金NNSFC Grant No.41974170 and 41974196Specialized Research Fund for State Key Laboratories of China,and Pandeng Program of National Space Science Center,Chinese Academy of Sciences.BBT(2019153),YTZ(2017186),WYL(2018177)LHX(2021144)were supported by the Youth Innovation Promotion Associationfunded by the Young Elite Scientists Sponsorship Program by CAST.
文摘The Mars Ion and Neutral Particle Analyzer(MINPA)is one of the three scientific instruments onboard the Tianwen-1 orbiter to investigate the Martian space environment.During Tianwen-1’s transfer orbit to Mars,the MINPA was switched on to measure the solar wind ions.Here,we present the first results of the MINPA observations in the solar wind.During cruise,nearly half of the MINPA ion field-of-view(FOV)was blocked by the lander capsule;thus only the solar-wind ions with azimuthal speeds pointing towards the unblocked FOV sectors could be detected.We perform a detailed comparison of the MINPA’s solar wind observations with data from Earth-based missions when MINPA reached its count-rate peak,finding a general consistency of the ion moments between them.The blocking effect due to the lander is evaluated quantitatively under varying solar-wind velocity conditions.Despite the blocking effect,the MINPA’s solar wind measurements during the transfer orbit suggest a good performance.
基金supported by the National Natural Science Foundation of China(Nos.10772106 and 11072138)the Natural Science Foundation of Shanghai(No.15ZR1416100)the Shanghai Leading Academic Discipline Project(No.S30106)
文摘A new continuum model is developed to study the influence of surface stress on the behaviors of piezoelectric nanobeams. Different from existing piezoelectric surface models which only consider the surface properties, the proposed model takes surfaceinduced initial fields into consideration. Due to the fact that the surface-induced initial fields are totally different under various boundary conditions, two kinds of beams, the doubly-clamped beam and the cantilever beam, are analyzed. Furthermore, boundary conditions can affect not only the initial state of the piezoelectric nanobeam but also the forms of the governing equations. Based on the Euler-Bernoulli beam theory, the nonlin- ear Green-Lagrangian strain-displacement relationship is applied. In addition, the surface area change is also considered in the proposed model. The governing equations of the doubly-clamped and cantilever beams are derived by the energy variation principle. Com- pared with existing Young-Laplace models, the proposed model for the doubly-clamped beam is similar to the Young-Laplace models. However~ the governing equation of the cantilever beam derived by the proposed model is very different from that derived by the Young-Laplace models. The behaviors of piezoelectric nanobeams predicted by these two models Mso have significant discrepancies, which is owing to the surface-induced initial fields in the bulk beam.
基金funded by the Chinese National Space Administration.
文摘The main objective of the Mars Ion and Neutral Particle Analyzer(MINPA)aboard the Chinese Mars Exploration Mission(Tianwen-1)is to study the solar wind-Mars interaction by measuring the ions and energetic neutral atoms(ENAs)near Mars.The MINPA integrates ion and ENA measurements into one sensor head,sharing the same electronics box.The MINPA utilizes a standard toroidal top-hat electrostatic analyzer(ESA)followed by a time of flight(TOF)unit to provide measurement of ions with energies from 2.8 eV to 25.9 keV and ENAs from 50 eV to 3 keV with a base time resolution of 4 seconds.Highly polished silicon single crystal substrates with an Al2O3 film coating are used to ionize the ENAs into positive ions.These ions can then be analyzed by the ESA and TOF,to determine the energy and masses of the ENAs.The MINPA provides a 360°×90°field of view(FOV)with 22.5°×5.4°angular resolution for ion measurement,and a 360°×9.7°FOV with 22.5°×9.7°angular resolution for ENA measurement.The TOF unit combines a-15 kV acceleration high voltage with ultra-thin carbon foils to resolve H+,He2+,He+,O+,O2+and CO2+for ion measurement and to resolve H and O(≥16 amu group)for ENA measurement.Here we present the design principle and describe our ground calibration of the MINPA.
基金Supported by Natural Science Foundation of China(Grant No.52075032)Technology Research and Development Program Project of CHINA RAILWAY(Grant No.P2020J024).
文摘During the braking process,a large amount of heat energy is generated at the friction surfaces between the brake disc and pads and rapidly dissipates into the disc volume.In this paper,a three-dimensional thermo-mechanical coupling model of high-speed wheel-mounted brake discs containing bolted joints and contact relationships is established.The direct coupling method is used to analyze the temperature and stress of the brake discs during an emergency braking event with an initial speed of 300 km/h.A full-scale bench test is also conducted to monitor the temperatures of the friction ring and bolted joints.The simulation result shows that the surface temperature of the friction ring reaches its peak value of 414°C after 102 s of braking,which agrees well with the bench test result.The maximum alternating thermal stress occurs in the bolt hole where the maximum circumferential compressive stress is−658 MPa and the maximum circumferential tensile stress is 134 MPa.During the braking process,the out-of-plane deformation of the middle part of the friction ring is larger than that of the edge,which increases the axial tensile load of the connecting bolt.This work provides support for the design of brake discs and connecting bolts.
基金supported by the Special Major Science and Technology Project of Anhui Province(S202103b06020066)the 2020 Annual Graduate Innovation Fund of Anhui Agricultural University(2020YSJ-21)。
文摘The aboveground biomass(AGB)of shrubs and small trees is the main component for the productivity and carbon storage of understory vegetation in subtropical secondary forests.However,few allometric models exist to accurately evaluate understory biomass.To estimate the AGB of five common shrub(diameter at base<5 cm,<5 m high)and one small tree species(<8 m high,trees’s seedling),206 individuals were harvested and species-specific and multi-species allometric models developed based on four predictors,height(H),stem diameter(D),crown area(Ca),and wood density(ρ).As expected,the six species possessed greater biomass in their stems compared with branches,with the lowest biomass in the leaves.Species-specific allometric models that employed stem diameter and the combined variables of D~2H andρDH as predictors accurately estimated the components and total AGB,with R^(2) values from 0.602 and 0.971.A multi-species shrub allometric model revealed that wood density×diameter×height(ρDH)was the best predictor,with R^(2) values ranging from between 0.81 and 0.89 for the components and total AGB,respectively.These results indicated that height(H)and diameter(D)were effective predictors for the models to estimate the AGB of the six species,and the introduction of wood density(ρ)improved their accuracy.The optimal models selected in this study could be applied to estimate the biomass of shrubs and small trees in subtropical regions.
文摘Photocatalytic hydrogen peroxide(H_(2)O_(2))production is a promising strategy to replace the traditional production processes;however,the inefficient H_(2)O_(2) productivity limits its application.In this study,oxygen-rich g-C_(3)N_(4) with abundant nitrogen vacancies(OCN)was synthesized for photocatalytic H_(2)O_(2) production.X-ray photoelectron spectroscopy and Fourier-transform infrared spectroscopy indicated that oxygen-containing functional groups(–COOH and C–O–C)were obtained.Electron paramagnetic resonance confirmed the successful introduction of nitrogen vacancies.OCN exhibited efficient photocatalytic H_(2)O_(2) production performance of 1965μmol L^(−1) h^(−1) in air under visible-light irradiation.The high H_(2)O_(2) production was attributed to the enhanced adsorption of oxygen,enlarged specific surface area,and promoted carrier separation.An increased H_(2)O_(2) production rate(5781μmol L^(−1) h^(−1))was achieved in a Na_(3)PO_(4) solution.The improved performance was attributed to the changed reactive oxygen species.Specifically,the adsorbed PO_(4)^(3−) on the surface of the OCN promoted the transfer of holes to the catalyst surface.•O_(2)−obtained by O_(2) reduction reacted with adjacent holes to generate 1O_(2),which could efficiently generate H_(2)O_(2) with isopropanol.Additionally,PO_(4)^(3−),as a stabilizer,inhibited the decomposition of H_(2)O_(2).
基金supported by the NFSC Grants 51375385 and 51675425Natural Science Basic Research Plan in Shaanxi Province of China Grants 2016JZ013
文摘Tracking moving wideband sound sources is one of the most challenging issues in the acoustic array signal processing which is based on the direction of arrival(DOA) estimation. Compressive sensing(CS) is a recent theory exploring the signal sparsity representation, which has been proved to be superior for the DOA estimation. However, the spatial aliasing and the offset at endfire are the main obstacles for CS applied in the wideband DOA estimation. We propose a particle filter based compressive sensing method for tracking moving wideband sound sources. First, the initial DOA estimates are obtained by wideband CS algorithms. Then, the real sources are approximated by a set of particles with different weights assigned. The kernel density estimator is used as the likelihood function of particle filter. We present the results for both uniform and random linear array. Simulation results show that the spatial aliasing is disappeared and the offset at endfire is reduced. We show that the proposed method can achieve satisfactory tracking performance regardless of using uniform or random linear array.
文摘Planar films of pure and Ti^(4+)-dopedβ-Fe_(2)O_(3)were prepared by a spray pyrolysis method.X-ray diffraction patterns and Raman spectra of the metastableβ-Fe_(2)O_(3)film showed that its thermal stability was significantly improved because of covalent bonds in the interfaces between the film and substrate,while only weak Van der Waals bonds existed at the interfaces within the particle-assembledβ-Fe_(2)O_(3)film prepared by electrophoretic deposition.The as-prepared planar films were thus able to withstand higher annealing temperature and stronger laser irradiation power in comparison with theβ-Fe_(2)O_(3)particle-assembly.Ti^(4+)doping was used to increase the concentration of carriers in the metastableβ-Fe_(2)O_(3)film.Compared with pureβ-Fe_(2)O_(3)photoanodes,the highest saturated photocurrent for water splitting over the Ti^(4+)-dopedβ-Fe_(2)O_(3)photoanode was increased by a factor of approximately three.Theβ-Fe_(2)O_(3)photoanode exhibited photochemical stability for water splitting for a duration exceeding 100 h,which indicates its important potential application in solar energy conversion.
基金supported by the National Natural Science Foundation of China under Grants 61320106003 and 61401095the Civil Aerospace Technologies Research Project under Grant D010109The Fundamental Research Funds for the Central Universities under Grant YZZ17009
文摘The uplink of mobile satellite communication(MSC) system with hundreds of spot beams is essentially a multiple-input multiple-output(MIMO) channel. Dual-turbo iterative detection and decoding as a kind of MIMO receiver, which exchanges soft extrinsic information between a soft-in soft-out(SISO) detector and an SISO decoder in an iterative fashion, is an efficient method to reduce the uplink inter-beam-interference(IBI),and so the receiving bit error rate(BER).We propose to replace the linear SISO detector of traditional dual-turbo iterative detection and decoding with the AMP detector for the low-density parity-check(LDPC) coded multibeam MSC uplink. This improvement can reduce the computational complexity and achieve much lower BER.