The construction of high precision geostrophic currents based on new gravity models of GOCE and satellite altimetry data

The new gravity field models of gravity field and steady-state ocean circulation explorer(GOCE),TIM_R6 and DIR_R6,were released by the European Space Agency(ESA)in June 2019.The sixth generation of gravity models have the highest possible signal and lowest error levels compared with other GOCE-only gravity models,and the accuracy is significantly improved.This is an opportunity to build high precision geostrophic currents.The mean dynamic topography and geostrophic currents have been calculated by the 5th(TIM_R5 and DIR_R5),6th(TIM_R6 and DIR_R6)release of GOCE gravity field models and ITSG-Grace2018 of GRACE gravity field model in this study.By comparison with the drifter results,the optimal filtering lengths of them have been obtained(for DIR_R5,DIR_R6,TIM_R5 and TIM_R6 models are 1°and for ITSG-Grace2018 model is 1.1°).The filtered results show that the geostrophic currents obtained by the GOCE gravity field models can better reflect detailed characteristics of ocean currents.The total geostrophic speed based on the TIM_R6 model is similar to the result of the DIR_R6 model with standard deviation(STD)of 0.320 m/s and 0.321 m/s,respectively.The STD of the total velocities are 0.333 m/s and 0.325 m/s for DIR_R5 and TIM_R5.When compared with ITSG-Grace2018 results,the STD(0.344 m/s)of total geostrophic speeds is larger than GOCE results,and the accuracy of geostrophic currents obtained by ITSG-Grace2018 is lower.And the absolute errors are mainly distributed in the areas with faster speeds,such as the Antarctic circumpolar circulation,equatorial region,Kuroshio and Gulf Stream areas.After the remove-restore technique was applied to TIM_R6 MDT,the STD of total geostrophic speeds dropped to 0.162 m/s.