The wettability of molten Al_(x)CoCrCuFeNi(x is from 0 to 1.5,mol.%)high-entropy alloys(HEA)on a WC substrate was measured using a modified sessile drop method at 1823 K in an argon atmosphere.The wetting behaviors an...The wettability of molten Al_(x)CoCrCuFeNi(x is from 0 to 1.5,mol.%)high-entropy alloys(HEA)on a WC substrate was measured using a modified sessile drop method at 1823 K in an argon atmosphere.The wetting behaviors and interfacial characteristics between HEAs and WC were studied.Good wettability with final equilibrium contact angles of 0.5°-4.6°is obtained,and addition of Al deteriorates the wettability of the HEAs.The wetting of Al_(x)CoCrCuFeNi/WC system can be roughly divided into an initially sharp spreading stage and a subsequent steady-state phase.In the first stage,the adsorption of Cr atoms at the solid-liquid interface primarily contributes to the wetting,and the contact angle drastically reduces.However,both the wetting behavior and interfacial microstructure are determined by the Al content of the HEA in the next stage.For x≤0.5,the wetting is mainly driven by the dissolution of WC,although a few reaction products of(W,Cr)_(2)C are observed.Moreover,an obvious dissolution pit appears at the surface of the substrate.When the Al content of x≥1,the interfacial reaction is dominant in competition with the dissolution of WC,and massive reaction products precipitate at the HEA/WC interface,which leads to the formation of a continuous reaction layer.展开更多
基金the National Key R&D Program of China(No.2017YFB0305702)the Major Special Project for Industry-university-research Collaborative Innovation of Guangzhou City(No.201604020139)+1 种基金the Project for Science and Technology Program of Guangdong Province(No.2016A020220005)the Major Special Projects for Science and Technology Program of Guangdong Province(Nos.2014B010129002 and 2019B090907001),China。
文摘The wettability of molten Al_(x)CoCrCuFeNi(x is from 0 to 1.5,mol.%)high-entropy alloys(HEA)on a WC substrate was measured using a modified sessile drop method at 1823 K in an argon atmosphere.The wetting behaviors and interfacial characteristics between HEAs and WC were studied.Good wettability with final equilibrium contact angles of 0.5°-4.6°is obtained,and addition of Al deteriorates the wettability of the HEAs.The wetting of Al_(x)CoCrCuFeNi/WC system can be roughly divided into an initially sharp spreading stage and a subsequent steady-state phase.In the first stage,the adsorption of Cr atoms at the solid-liquid interface primarily contributes to the wetting,and the contact angle drastically reduces.However,both the wetting behavior and interfacial microstructure are determined by the Al content of the HEA in the next stage.For x≤0.5,the wetting is mainly driven by the dissolution of WC,although a few reaction products of(W,Cr)_(2)C are observed.Moreover,an obvious dissolution pit appears at the surface of the substrate.When the Al content of x≥1,the interfacial reaction is dominant in competition with the dissolution of WC,and massive reaction products precipitate at the HEA/WC interface,which leads to the formation of a continuous reaction layer.