The recent trend of vehicle design aims at crash safety and environmentally-friendly aspect. For the crash safety aspect, the energy absorbing members should absorb collision energy sufficiently but for the environmen...The recent trend of vehicle design aims at crash safety and environmentally-friendly aspect. For the crash safety aspect, the energy absorbing members should absorb collision energy sufficiently but for the environmentally-friendly aspect, the vehicle structure must be light weight in order to improve the fuel efficiency and reduce the tail gas emission. Therefore, the light weight of vehicle must be achieved in a securing safety status of crash. An aluminum or carbon fiber reinforced plastics (CFRP) is representative one of the light-weight materials. Based on the respective collapse behavior of aluminum and CFRP member, the collapse behavior of hybrid thin-walled member was evaluated. The hybrid members were manufactured by wrapping CFRP prepreg sheets outside the aluminum hollow members in the autoclave. Because the CFRP is an anisotropic material whose mechanical properties, such as strength and elasticity, change with its stacking condition, the effects of the stacking condition on the collapse behavior evaluation of the hybrid thin-walled member were tested. The collapse mode and energy absorption capability of the hybrid thin-walled member were analyzed with the change of the fiber orientation angle and interface number.展开更多
Carbon fiber reinforced plastic (CFRP) of the advanced composite materials is widely used in lightmass structural materials of air planes, ship and automobiles because of high strength and stiffness. In this study, ex...Carbon fiber reinforced plastic (CFRP) of the advanced composite materials is widely used in lightmass structural materials of air planes, ship and automobiles because of high strength and stiffness. In this study, experimental investigation was performed for each specimen. The square section members consist of aluminum, CFRP and hybrid (aluminum/CFRP) member, and hat-shaped section members consist of CFRP and hybrid (aluminum/CFRP) members specimen. Based on the collapse characteristics of aluminum square section member, the collapse characteristics and energy absorption capability of hat-shaped section members were analyzed. The axial static collapse tests were carried out for each section member. The collapse modes and the energy absorption capability of the members were analyzed. In the lightmass design aspect, the collapse characteristics and energy absorption capability of the members were compared.展开更多
文摘The recent trend of vehicle design aims at crash safety and environmentally-friendly aspect. For the crash safety aspect, the energy absorbing members should absorb collision energy sufficiently but for the environmentally-friendly aspect, the vehicle structure must be light weight in order to improve the fuel efficiency and reduce the tail gas emission. Therefore, the light weight of vehicle must be achieved in a securing safety status of crash. An aluminum or carbon fiber reinforced plastics (CFRP) is representative one of the light-weight materials. Based on the respective collapse behavior of aluminum and CFRP member, the collapse behavior of hybrid thin-walled member was evaluated. The hybrid members were manufactured by wrapping CFRP prepreg sheets outside the aluminum hollow members in the autoclave. Because the CFRP is an anisotropic material whose mechanical properties, such as strength and elasticity, change with its stacking condition, the effects of the stacking condition on the collapse behavior evaluation of the hybrid thin-walled member were tested. The collapse mode and energy absorption capability of the hybrid thin-walled member were analyzed with the change of the fiber orientation angle and interface number.
文摘Carbon fiber reinforced plastic (CFRP) of the advanced composite materials is widely used in lightmass structural materials of air planes, ship and automobiles because of high strength and stiffness. In this study, experimental investigation was performed for each specimen. The square section members consist of aluminum, CFRP and hybrid (aluminum/CFRP) member, and hat-shaped section members consist of CFRP and hybrid (aluminum/CFRP) members specimen. Based on the collapse characteristics of aluminum square section member, the collapse characteristics and energy absorption capability of hat-shaped section members were analyzed. The axial static collapse tests were carried out for each section member. The collapse modes and the energy absorption capability of the members were analyzed. In the lightmass design aspect, the collapse characteristics and energy absorption capability of the members were compared.