Because Si is a noncarbide forming element, a multiphase microstructure consisting of ferrite, bainite, and retained austenite, at room temperature, can be formed by controlling the thermomechanical process strictly. ...Because Si is a noncarbide forming element, a multiphase microstructure consisting of ferrite, bainite, and retained austenite, at room temperature, can be formed by controlling the thermomechanical process strictly. The cooling schedules must be restricted by the formation of pearlite and cementite. In the present article, a new integrated mathematical model for prediction of microstructure evolution during controlled rolling and controlled cooling is developed for a typical kind of low carbon Si-Mn TRIP steel, which consists of temperature simulation, recrystallization, and transformation models. The influence of Si contents has been thoroughly investigated. The calculated results indicate that Si retards recrystallization, restrains austenite grain growth as well as accelerates polygonal ferrite transformation.展开更多
Multi-pass slab vertical-horizontal (V-H) rolling process with variable edging roll shape have been simulated with explicit dynamic finite element method and updating geometric method. The distributions of plastic s...Multi-pass slab vertical-horizontal (V-H) rolling process with variable edging roll shape have been simulated with explicit dynamic finite element method and updating geometric method. The distributions of plastic strain contour in slab daring rolling process with different edging roll and under different rolling stage have been obtained. The results show that there exist two thin strain assembling zones in slab when the flat edging roll is used, and there just exist one strain assembling zone in slab when the edging roll with groove is used. And compared the deformation equality between flat edging roll and edging roll with groove, the lateris better than the former, which supplies the theory prove to the slab deformation distribution during V-H rolling process and is helpful for predicting the slab texture.展开更多
基金This work was supported by the National Natural Science Foundation of China (No. 50334010).
文摘Because Si is a noncarbide forming element, a multiphase microstructure consisting of ferrite, bainite, and retained austenite, at room temperature, can be formed by controlling the thermomechanical process strictly. The cooling schedules must be restricted by the formation of pearlite and cementite. In the present article, a new integrated mathematical model for prediction of microstructure evolution during controlled rolling and controlled cooling is developed for a typical kind of low carbon Si-Mn TRIP steel, which consists of temperature simulation, recrystallization, and transformation models. The influence of Si contents has been thoroughly investigated. The calculated results indicate that Si retards recrystallization, restrains austenite grain growth as well as accelerates polygonal ferrite transformation.
文摘Multi-pass slab vertical-horizontal (V-H) rolling process with variable edging roll shape have been simulated with explicit dynamic finite element method and updating geometric method. The distributions of plastic strain contour in slab daring rolling process with different edging roll and under different rolling stage have been obtained. The results show that there exist two thin strain assembling zones in slab when the flat edging roll is used, and there just exist one strain assembling zone in slab when the edging roll with groove is used. And compared the deformation equality between flat edging roll and edging roll with groove, the lateris better than the former, which supplies the theory prove to the slab deformation distribution during V-H rolling process and is helpful for predicting the slab texture.