Nanocrystalline indium oxide powders were prepared by microemulsion and then Y2O3 and Nd2O3 doped In2O3 were synthesized separately by impregnation and chemical co-deposition. The structure and morphology were charact...Nanocrystalline indium oxide powders were prepared by microemulsion and then Y2O3 and Nd2O3 doped In2O3 were synthesized separately by impregnation and chemical co-deposition. The structure and morphology were characterized by XRD and TEM, respectively. Gas sensing properties were tested at static state. The results show that homogeneous indium oxide nanopowder with main grain size of 20 nm can be obtained from microemulsion after sintered at 600 ℃ for 1 h. Pure indium oxide gas sensor has higher sensitivity to gasoline than that to ethanol, HCHO, C6H6, NH3, C4H10, but the selectivity is not as well as sensitivity.展开更多
In this paper we report the real-time beam loss monitoring (BLM) system at the storage ring of SSRF.The BLM-XS detectors and Ethernet data acquisition system are used in this system.Some applications and experiments o...In this paper we report the real-time beam loss monitoring (BLM) system at the storage ring of SSRF.The BLM-XS detectors and Ethernet data acquisition system are used in this system.Some applications and experiments of the BLM system are also presented.The BLM system provides dynamic information of beam loss for the storage ring,and is helpful to ensure the facility commissioning,investigate the problems of machine,optimize the machine parameters and further increase the beam lifetime.展开更多
<正>Flower-like ZnO was prepared through a hydrothermal process using zinc sulfate as raw material.The microstructure and morphology of the samples were characterized by X-ray diffraction (XRD) and transmission ...<正>Flower-like ZnO was prepared through a hydrothermal process using zinc sulfate as raw material.The microstructure and morphology of the samples were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM).XRD results showed that the as-obtained sample could be indexed to hexagonal wurtzite ZnO.TEM results revealed that the ZnO sample presented flower-like shape.The gas sensors were prepared with the traditional sintering process and their gas sensitivities were detected.The gas sensitivity results showed that the sensors based on flower-like ZnO were very sensitive to dilute 90~# gasoline.The relatively high sensitivity and selectivity of these sensors made from flower-like ZnO demonstrated the potential for developing a new class of selective gasoline sensors.展开更多
文摘Nanocrystalline indium oxide powders were prepared by microemulsion and then Y2O3 and Nd2O3 doped In2O3 were synthesized separately by impregnation and chemical co-deposition. The structure and morphology were characterized by XRD and TEM, respectively. Gas sensing properties were tested at static state. The results show that homogeneous indium oxide nanopowder with main grain size of 20 nm can be obtained from microemulsion after sintered at 600 ℃ for 1 h. Pure indium oxide gas sensor has higher sensitivity to gasoline than that to ethanol, HCHO, C6H6, NH3, C4H10, but the selectivity is not as well as sensitivity.
基金Supported by Shanghai Synchrotron Radiation Facility project
文摘In this paper we report the real-time beam loss monitoring (BLM) system at the storage ring of SSRF.The BLM-XS detectors and Ethernet data acquisition system are used in this system.Some applications and experiments of the BLM system are also presented.The BLM system provides dynamic information of beam loss for the storage ring,and is helpful to ensure the facility commissioning,investigate the problems of machine,optimize the machine parameters and further increase the beam lifetime.
文摘<正>Flower-like ZnO was prepared through a hydrothermal process using zinc sulfate as raw material.The microstructure and morphology of the samples were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM).XRD results showed that the as-obtained sample could be indexed to hexagonal wurtzite ZnO.TEM results revealed that the ZnO sample presented flower-like shape.The gas sensors were prepared with the traditional sintering process and their gas sensitivities were detected.The gas sensitivity results showed that the sensors based on flower-like ZnO were very sensitive to dilute 90~# gasoline.The relatively high sensitivity and selectivity of these sensors made from flower-like ZnO demonstrated the potential for developing a new class of selective gasoline sensors.
