The Anninghe fault is a major left-lateral strike-slip fault in southwest China and a seismic gap with a potential earthquake larger than MW 7.0 lies in the Mianning-Xichang segment according to recent observations.Th...The Anninghe fault is a major left-lateral strike-slip fault in southwest China and a seismic gap with a potential earthquake larger than MW 7.0 lies in the Mianning-Xichang segment according to recent observations.The shallow structure of this region can offer a glimpse into the geometry of the fault,which plays an important role in earthquake hazard mitigation.To further investigate the sedimentary structure of the Anninghe fault zone,two dense linear arrays with a station spacing of around 80 m were deployed across the fault.In this study,the H/V spectral ratio(HVSR),together with its peak frequency at each station site,was obtained by applying the Nakamura method.Our findings demonstrate that the peak frequency behaves in high correlation with lithology and is controlled by topography.HVSR in foothills or regions with magmatic intrusion shows a single peak at about 2–3 Hz.In locations with abundant Quaternary sedimentation,such as Anninghe valleys and fracture zones,another low-frequency peak around 0.4 Hz can be noticed in HVSR.By using the empirical relationship,the thickness of the sedimentary layer around the fault fracture zone is estimated to be 300–600 m.Furthermore,the sedimentary interface shows a downward dip to the east,possibly influenced by the east-west extrusion stress.Considering the resonance effect,buildings with 6–9 stories in the valley area of the Anninghe require additional attention in earthquake hazard prevention.展开更多
The Anninghe fault is a large left-lateral strike-slip fault in southwestern China. It has controlled deposition and magmatic activities since the Proterozoic, and seismic activity occurs frequently. The Mianning-Xich...The Anninghe fault is a large left-lateral strike-slip fault in southwestern China. It has controlled deposition and magmatic activities since the Proterozoic, and seismic activity occurs frequently. The Mianning-Xichang segment of the Anninghe fault is a seismic gap that has been locked by high stress. Many studies suggest that this segment has great potential for large earthquakes(magnitude >7). We obtained three vertical velocity profiles of the Anninghe fault(between Mianning and Xichang) based on the inversion of P-wave first arrival times. The travel time data were picked from seismograms generated by methane gaseous sources and recorded by three linearly distributed across-fault dense arrays. The inversion results show that the P-wave velocity structures at depths of 0-2 km corresponds well with the local lithology. The Quaternary sediments have low seismic velocities, whereas the igneous rocks,metamorphic rocks, and bedrock have high seismic velocities. We then further discuss the fault activities of the two fault branches of the Anninghe fault in the study region based on small earthquakes(magnitudes between ML 0.5 and ML 2.5) detected by the Xichang array.The eastern fault branch is more active than the western branch and that the fault activities in the eastern branch are different in the northern and southern segments at the border of 28°21′N. The high-resolution models obtained are essential for future earthquake rupture simulations and hazard assessments of the Anninghe fault zone. Future studies of velocity models at greater depths may further explain the complex fault activities in the study region.展开更多
The Middle-Lower Yangtze River is a typical transition region between the nearly NW-oriented Tethys and NE-trending Pacific tectonic regimes.Structures of different periods and directions overlap strongly during these...The Middle-Lower Yangtze River is a typical transition region between the nearly NW-oriented Tethys and NE-trending Pacific tectonic regimes.Structures of different periods and directions overlap strongly during these processes.The NE-trending Yangtze River compound structural belt and NW-trending Tongling-Hangzhou structural belt both control the magmatic activities and distributions of the metallogenic belts in the area.Here,we obtain 3-D high-resolution isotropic and azimuthally anisotropic velocity structures at depths of 1–10 km using the first arrivals from airgun sources.The velocity maps correspond well with the tectonic structures,with high-velocity anomalies distributed in ore-concentrated districts and low-velocity anomalies distributed along the Yangtze River.The fast directions are generally consistent with the fault strike,indicating that the azimuthal anisotropy is mainly dominated by the fault and fracture trends in the upper crust.The complicated fast directions near the Luzong and Tongling ore deposits reveal complex deformations in the upper crust,which are mainly caused by the intersection of the Yangtze River compound and Tongling-Hangzhou structural belts.The magma intrusion beneath the two ore deposits(Luzong and Tongling)are connected at depths of 5–10 km.展开更多
基金This study was jointly supported by the Key Research and Development Program of China(2021YFC3000704,2018YFC1503400)the National Natural Science Foundation of China(42125401)the special fund of Key Laboratory of Earthquake Prediction,CEA(2021IEF0103).
文摘The Anninghe fault is a major left-lateral strike-slip fault in southwest China and a seismic gap with a potential earthquake larger than MW 7.0 lies in the Mianning-Xichang segment according to recent observations.The shallow structure of this region can offer a glimpse into the geometry of the fault,which plays an important role in earthquake hazard mitigation.To further investigate the sedimentary structure of the Anninghe fault zone,two dense linear arrays with a station spacing of around 80 m were deployed across the fault.In this study,the H/V spectral ratio(HVSR),together with its peak frequency at each station site,was obtained by applying the Nakamura method.Our findings demonstrate that the peak frequency behaves in high correlation with lithology and is controlled by topography.HVSR in foothills or regions with magmatic intrusion shows a single peak at about 2–3 Hz.In locations with abundant Quaternary sedimentation,such as Anninghe valleys and fracture zones,another low-frequency peak around 0.4 Hz can be noticed in HVSR.By using the empirical relationship,the thickness of the sedimentary layer around the fault fracture zone is estimated to be 300–600 m.Furthermore,the sedimentary interface shows a downward dip to the east,possibly influenced by the east-west extrusion stress.Considering the resonance effect,buildings with 6–9 stories in the valley area of the Anninghe require additional attention in earthquake hazard prevention.
基金supported by the Key Research and Development Project of the Ministry of Science and Technology(Grant No.2018YFC1503400)。
文摘The Anninghe fault is a large left-lateral strike-slip fault in southwestern China. It has controlled deposition and magmatic activities since the Proterozoic, and seismic activity occurs frequently. The Mianning-Xichang segment of the Anninghe fault is a seismic gap that has been locked by high stress. Many studies suggest that this segment has great potential for large earthquakes(magnitude >7). We obtained three vertical velocity profiles of the Anninghe fault(between Mianning and Xichang) based on the inversion of P-wave first arrival times. The travel time data were picked from seismograms generated by methane gaseous sources and recorded by three linearly distributed across-fault dense arrays. The inversion results show that the P-wave velocity structures at depths of 0-2 km corresponds well with the local lithology. The Quaternary sediments have low seismic velocities, whereas the igneous rocks,metamorphic rocks, and bedrock have high seismic velocities. We then further discuss the fault activities of the two fault branches of the Anninghe fault in the study region based on small earthquakes(magnitudes between ML 0.5 and ML 2.5) detected by the Xichang array.The eastern fault branch is more active than the western branch and that the fault activities in the eastern branch are different in the northern and southern segments at the border of 28°21′N. The high-resolution models obtained are essential for future earthquake rupture simulations and hazard assessments of the Anninghe fault zone. Future studies of velocity models at greater depths may further explain the complex fault activities in the study region.
基金This work is supported by National Natural Science Foundation of China(Nos.41790464 and 42004034).
文摘The Middle-Lower Yangtze River is a typical transition region between the nearly NW-oriented Tethys and NE-trending Pacific tectonic regimes.Structures of different periods and directions overlap strongly during these processes.The NE-trending Yangtze River compound structural belt and NW-trending Tongling-Hangzhou structural belt both control the magmatic activities and distributions of the metallogenic belts in the area.Here,we obtain 3-D high-resolution isotropic and azimuthally anisotropic velocity structures at depths of 1–10 km using the first arrivals from airgun sources.The velocity maps correspond well with the tectonic structures,with high-velocity anomalies distributed in ore-concentrated districts and low-velocity anomalies distributed along the Yangtze River.The fast directions are generally consistent with the fault strike,indicating that the azimuthal anisotropy is mainly dominated by the fault and fracture trends in the upper crust.The complicated fast directions near the Luzong and Tongling ore deposits reveal complex deformations in the upper crust,which are mainly caused by the intersection of the Yangtze River compound and Tongling-Hangzhou structural belts.The magma intrusion beneath the two ore deposits(Luzong and Tongling)are connected at depths of 5–10 km.