Aging Resistance Evaluation of Aged Paper Reinforced with Different Nanocelluloses

Paper documents experience severe acidification and embrittlement.Nanocellulose is an excellent reinforcement material for paper documents owing to its compatibility and excellent mechanical strength.However,little research has been conducted on the aging resistance of nanocellulose-reinforced paper.In this study,six types of nanocelluloses were used to reinforce aged paper.The reinforcement and anti-aging performances were evaluated,and the anti-aging mechanism was further clarified.Nanocellulose with a high degree of polymerization can better enhance aged paper,and non-chemical nanocellulose also shows better anti-aging performance,such as nanocellulose prepared by mechanical or biological methods.However,nanocellulose prepared using chemical methods exhibits poor reinforcement and anti-aging performance.This is because it has a small particle size that is not beneficial for physical crosslinking with paper fibers.More importantly,the introduction of acidic or oxidizing groups on nanocellulose accelerates the acid hydrolysis and oxidation rate of paper fibers,especially nanocellulose prepared by 2,2,6,6-tetramethylpiperidine-1-oxyl oxidation,which should not be used to protect paper documents.

Key Techniques of Stereoscopic and Efficient Cultivation of Strawberry in Southern Xinjiang

Strawberry is rich in nutrition,which is the only fresh fruit in winter in southern Xinjiang,with good prospect of stereoscopic cultivation.In this paper,the key techniques such as stereoscopic cultivation pattern,the combination of different modes,the substrate of strawberry cultivation,the drip irrigation system,the formula of nutrient solution,the selection of varieties,the propagation of seed and seedling,the induction of flower buds,the planting and management of plants,and the green control of diseases and insect pests are introduced,and greenhouse space and solar energy are fully used to maximize the economic and social benefits of strawberry farming combined with tourism.The results will further promote the quality and efficiency of strawberry industry in southern Xinjiang,and provide a reference for strawberry growers.

Performance Characterization of CR/PU Asphalt for Potential Application in Assembled Fast-Repairing Engineering

Conventional repairing methods for asphalt pavement have some inconveniences,such as insufficient strength,and are typically time-consuming.To address these issues,this study proposes a new technological method to design and prepare a high-performance assembled asphalt concrete block for fast repair of the potholes.A series of composite modified asphalt binders with 10%crumb rubber(CR)and different dosages(0%,1%,3%,5%)of polyurethane(PU)are examined to determine the optimized binder.Subsequently,the corresponding asphalt mixtures are prepared for further comparison and assessment of engineering properties,such as moistureinduced damage,high-temperature deformation,and low-temperature cracking characteristics.The test results show that PU can significantly improve the high-temperature performance and hardness of(crumb rubber modified asphalt)CRMA binder;3%PU contributes allowing the resistance of CRMA mixture to moisture-induced damage at higher levels,particularly under water whole immersion;as 3%PU is added,the high-temperature rutting deformation resistance of the CRMA mixture increases significantly,and the low-temperature anti-cracking properties are also improved slightly.Therefore,the innovatively designed high-quality assembled fast-repairing asphalt concrete block is recommended as an appropriate option for highway maintenance.

Two-sided ultrasonic surface rolling process of aeroengine blades based on on-machine noncontact measurement

As crucial parts of an aeroengine,blades are vulnerable to damage from long-term operation in harsh environments.The ultrasonic surface rolling process(USRP)is a novel surface treatment technique that can highly improve the mechanical behavior of blades.During secondary machining,the nominal blade model cannot be used for secondary machining path generation due to the deviation between the actual and nominal blades.The clamping error of the blade also affects the precision of secondary machining.This study presents a two-sided USRP(TS-USRP)machining for aeroengine blades on the basis of on-machine noncontact measurement.First,a TS-USRP machining system for blade is developed.Second,a 3D scanning system is used to obtain the point cloud of the blade,and a series of point cloud processing steps is performed.A local point cloud automatic extraction algorithm is introduced to extract the point cloud of the strengthened region of the blade.Then,the tool path is designed on the basis of the extracted point cloud.Finally,an experiment is conducted on an actual blade,with results showing that the proposed method is effective and efficient.