A Novel Catalyst for CO_(2) Reforming of CH_4

A novel Ni-Co/SiO2 catalyst which exhibits high activity and excellent anti-carbon deposition property for CO2 reforming of CH4 to synthesis gas is developed.

Ruthenium Bisphosphine Catalyst on Functionalized Silica: Novel Efficient Catalyst for Carbon Dioxide Hydrogenation to Formic Acid

A novel efficient catalyst for the hydrogenation of carbon dioxide to formic acid ruthenium bisphosphine on functionalized silica was in situ synthesized, affording turnover frequency （TOF） of 1190 h^-1 at 100% selectivity under 80℃ with total pressure of 16.0 MPa. The catalyst can be separated from the reaction mixture easily and reused with moderate loss of activity.

Template Polymerization Based on Stober Method:an Improved Method for Fabrication of Hollow Polysiloxane Spheres

A modified Stober method has been developed which permits the controlled growth of spherical hollow spheres with diameters between 197 and 208 nanometers by consecutively cocondensed methyltrimethoxysilane and dimethyldimethoxysilane monomers onto microemulsion of polydimethylsiloxane and subsequently removing the templated polydimethylsiloxane by exposure to solvents. Ammonia was used as a morphological catalyst. The morphology of the polymer spheres was demonstrated by transmission electron micrographs （TEM） and atomic force microscopy （AFM）.

Immobilized Ruthenium Catalyst for Carbon Dioxide Hydrogenation

Three kinds of cross linked polystyrene resin （PS） supported ruthenium complexes were developed as catalysts for the synthesis of formic acid from carbon dioxide hydrogenation. Many factors, such as the functionalized supports, solvents and ligands, could influence their activities and reuse performances greatly. These immobilized catalysts also offer the industrial advantages such as easy separation.

A Convenient Synthesis of Aromatic Fluoride by Thermal Stable Pyridinium Phase-transfer Catalyst

Using 4-Dialkylaminopyridinium salt as a thermal stable phase-transfer catalyst (PTC), the excellent results were obtained in the halogen-exchange fluorination.

A New Catalyst System V-Cs-Cu-Tl for Selective Oxidation of p-tert Butyl Toluene to p-tert Benzaldehyde

In this paper, a new catalysts system V-Cs-Cu-TI was studied in the gas phase selective oxidation for p-tert butyl toluene to p-tert benzaldehyde. The catalyst system was prepared by impregnation method. The results obtained are optimum value and have good advantages in environmental protection.

Catalytic Hydrogenation of Diacetyl Monoxime to Tetramethylpyrazine with the Soluble Transition Metal Catalysts

Catalytic hydrogenation of diacetyl monoxime to tetramethylpyrazine, by the homogeneous catalysts generated in situ from some transition metal chlorides with triphenylphosphine in ethanol under H-2 pressure of 0.6 similar to 4.6 MPa at 100 similar to 150 degrees C, has been studied. The optimum H-2 partial pressure was observed at about 1.3 MPa. The maximum conversion of diacetyl monoxime and yield of tetramethylpyrazine were 97% and 90%, respectively.

Effect of Titanium on Methanol Synthesis from CO_2 Hydrogenation over Cu/γ-Al_2O_3

Titanium-modified (-alumina supported CuO catalyst has been prepared and used to methanol synthesis from CO_2 hydrogenation. The addition of Ti to the CuO/(-Al_2O_3 catalyst made the copper in the catalyst exist in much smaller crystallites. The effect of the loading of Ti on the activity and selectivity to methanol from CO_2 hydrogenation was investigated. The activity was found to increase with the increasing of surface area of metallic copper, but it is not a linear relationship.

A Facile Route to Unsymmetrical Sulfide

Unsymmetrical sulfides can be generated by the reaction of chlorine substituted aromatic compounds in sulfoxide in the presence of fluorine anion in fair yield. A likely mechanism was proposed.