Hierarchical model for strain generalized streaming potential induced by the canalicular fluid flow of an osteon

A hierarchical model is developed to predict the streaming potential(SP) in the canaliculi of a loaded osteon. Canaliculi are assumed to run straight across the osteon annular cylinder wall, while disregarding the effect of lacuna. SP is generalized by the canalicular fluid flow. Analytical solutions are obtained for the canalicular fluid velocity, pressure, and SP. Results demonstrate that SP amplitude(SPA) is proportional to the pressure difference, strain amplitude, frequency, and strain rate amplitude. However, the key loading factor governing SP is the strain rate, which is a representative loading parameter under the specific physiological state. Moreover, SPA is independent of canalicular length. This model links external loads to the canalicular fluid pressure, velocity, and SP, which can facilitate further understanding of the mechanotransduction and electromechanotransduction mechanisms of bones.

Poroelastic behaviors of the osteon: A comparison of two theoretical osteon models

In the paper, two theoretical poroelastic osteon models are presented to compare their poroelastic behaviors, one is the hollow osteon model (Haversian fluid is neglected) and the other is the osteon model with Haversian fluid considered. They both have the same two types of impermeable exterior boundary conditions, one is elastic restraint and the other is displacement constrained, which can be used for analyzing other experiments performed on similarly shaped poroelastic specimens. The obtained analytical pressure and velocity solutions demonstrate the effects of the loading factors and the material parameters, which may have a significant stimulus to the mechanotransduction of bone remodeling signals. Model comparisons indicate: (1) The Haversian fluid can enhance the whole osteonal fluid pressure and velocity fields. (2) In the hollow model, the key loading factor governing the poroelastic behavior of the osteon is strain rate, while in the model with Haversian fluid considered, the strain rate governs only the velocity. (3) The pressure amplitude is proportional to the loading frequency in the hollow model, while in the model with Haversian fluid considered, the loading frequency has little effect on the pressure amplitude.

FeCo-N encapsuled in nitrogen-doped carbon nanotubes as bifunctional electrocatalysts with a high stability for zinc air batteries

For zinc air batteries,a non-noble metal-based electrocatalyst with a high performance and stability in oxygen evolution reaction(OER)and oxygen reduction reaction(ORR)is imperative in application.Herein,a catalyst based on FeCo-N encapsuled in nitrogen-doped carbon nanotubes has been prepared,which provides an implementable method to design controlled structures with excellent bifunction al electrocatalytic activities.By adjusting the molar ratio of two metals,the synthesized FeCo-N-C catalyst delivers a competitive ORR and OER performance compared with commercial Pt/C and IrO_(2),performing a low overvoltage gap between ORR(E_(1/2))and OER(E_(j=10))of 0.8 V.Moreover,as a promising cathode in zinc air battery,the FeCo-N-C catalyst possesses an affirmative stability of over 100 h and large power density(129 mW·cm^(-2)).This work demonstrates that FeCo-N-C is one of the most promising catalysts for zinc air batteries and provides a possibility for exploration of batteries with high stability by adjusting the molar ratio of metals in the catalysts.