Fine finishing of tungsten alloy is required to improve the surface quality of molds and precision instruments. Nevertheless, it is difficult to obtain high-quality surfaces as a result of grain boundary steps attribu...Fine finishing of tungsten alloy is required to improve the surface quality of molds and precision instruments. Nevertheless, it is difficult to obtain high-quality surfaces as a result of grain boundary steps attributed to differences in properties of two-phase microstructures. This paper presents a theoretical and experimental investigation on chemical mechanical polishing of W–Ni–Fe alloy. The mechanism of the boundary step generation is illustrated and a model of grain boundary step formation is proposed. The mechanism reveals the effects of mechanical and chemical actions in both surface roughness and material removal. The model was verified by the experiments and the results show that appropriately balancing the mechanical and chemical effects restrains the generation of boundary steps and leads to a fine surface quality with a high removal rate by citric acid-based slurry.展开更多
Lithium amides have been proved to be effective anionic initiators for the anionic polymerization of acrylonitrile to get high molecular weight polyacrylonitrile in this study. Polyacrylonitrile with weightaverage mol...Lithium amides have been proved to be effective anionic initiators for the anionic polymerization of acrylonitrile to get high molecular weight polyacrylonitrile in this study. Polyacrylonitrile with weightaverage molecular weight ranging from 1.02 × 10~6 g/mol to 1.23 ×10~6 g/mol (M_w/M_n= 1.9-2.2) could be prepared utilizing lithium amides derived from diisopropylamine, diethylamine, hexamethyldisilazane,dicyclohexylamine, and 2,2,6,6-tetramethylpiperidine as initiators. The polymerization of acrylonitrile proceeded in a homogeneous manner in N,N-di methyl for mamide and insignificant contribution of side reactions was confirmed.展开更多
基金supported by National Key Research and Development Program (No. 2018YFA0702900)National Natural Science Foundation of China (No. 51975096)+1 种基金Science Challenge Project (No. TZ2018006-0101-01)Liao Ning Revitalization Talents Program (No. XLYC1807230)。
文摘Fine finishing of tungsten alloy is required to improve the surface quality of molds and precision instruments. Nevertheless, it is difficult to obtain high-quality surfaces as a result of grain boundary steps attributed to differences in properties of two-phase microstructures. This paper presents a theoretical and experimental investigation on chemical mechanical polishing of W–Ni–Fe alloy. The mechanism of the boundary step generation is illustrated and a model of grain boundary step formation is proposed. The mechanism reveals the effects of mechanical and chemical actions in both surface roughness and material removal. The model was verified by the experiments and the results show that appropriately balancing the mechanical and chemical effects restrains the generation of boundary steps and leads to a fine surface quality with a high removal rate by citric acid-based slurry.
文摘Lithium amides have been proved to be effective anionic initiators for the anionic polymerization of acrylonitrile to get high molecular weight polyacrylonitrile in this study. Polyacrylonitrile with weightaverage molecular weight ranging from 1.02 × 10~6 g/mol to 1.23 ×10~6 g/mol (M_w/M_n= 1.9-2.2) could be prepared utilizing lithium amides derived from diisopropylamine, diethylamine, hexamethyldisilazane,dicyclohexylamine, and 2,2,6,6-tetramethylpiperidine as initiators. The polymerization of acrylonitrile proceeded in a homogeneous manner in N,N-di methyl for mamide and insignificant contribution of side reactions was confirmed.