In situ formation of multiple catalysts for enhancing the hydrogen storage of MgH_(2) by adding porous Ni_(3)ZnC_(0.7)/Ni loaded carbon nanotubes microspheres

MgH_(2) is considered one of the most promising hydrogen storage materials because of its safety,high efficiency,high hydrogen storage quantity and low cost characteristics.But some shortcomings are still existed:high operating temperature and poor hydrogen absorption dynamics,which limit its application.Porous Ni_(3)ZnC_(0.7)/Ni loaded carbon nanotubes microspheres(NZC/Ni@CNT)is prepared by facile filtration and calcination method.Then the different amount of NZC/Ni@CNT(2.5,5.0 and 7.5 wt%)is added to the MgH_(2) by ball milling.Among the three samples with different amount of NZC/Ni@CNT(2.5,5.0 and 7.5 wt%),the MgH_(2)-5 wt%NZC/Ni@CNT composite exhibits the best hydrogen storage performances.After testing,the MgH_(2)-5 wt%NZC/Ni@CNT begins to release hydrogen at around 110℃ and hydrogen absorption capacity reaches 2.34 wt%H_(2) at 80℃ within 60 min.Moreover,the composite can release about 5.36 wt%H_(2) at 300℃.In addition,hydrogen absorption and desorption activation energies of the MgH_(2)-5 wt%NZC/Ni@CNT composite are reduced to 37.28 and 84.22 KJ/mol H_(2),respectively.The in situ generated Mg_(2)NiH_(4)/Mg_(2)Ni can serve as a"hydrogen pump"that plays the main role in providing more activation sites and hydrogen diffusion channels which promotes H_(2) dissociation during hydrogen absorption process.In addition,the evenly dispersed Zn and MgZn2 in Mg and MgH_(2) could provide sites for Mg/MgH_(2) nucleation and hydrogen diffusion channel.This attempt clearly proved that the bimetallic carbide Ni_(3)ZnC_(0.7) is a effective additive for the hydrogen storage performances modification of MgH_(2),and the facile synthesis of the Ni_(3)ZnC_(0.7)/Ni@CNT can provide directions of better designing high performance carbide catalysts for improving MgH_(2).

Recent advances in the nanoconfinement of Mg-related hydrogen storage materials:A minor review

Hydrogen is an ideal clean energy because of its high calorific value and abundance of sources.However,storing hydrogen in a compact,inexpensive,and safe manner is the main restriction on the extensive utilization of hydrogen energy.Magnesium(Mg)-based hydrogen storage material is considered a reliable solid hydrogen storage material with the advantages of high hydrogen storage capacity(7.6wt%),good performance,and low cost.However,the high thermodynamic stability and slow kinetics of Mg-based hydrogen storage materials have to be overcome.In this paper,we will review the recent advances in the nanoconfinement of Mg-related hydrogen storage materials by loading Mg particles on different supporting materials,including carbons,metal-organic frameworks,and other materials.Perspectives are also provided for designing high-performance Mg-based materials using nanoconfinement.

Fluorescence Properties and Chemical Composition of Fine Particles in the Background Atmosphere of North China

To understand the aerosol characteristics in a regional background environment,fine-particle(PM_(2.5),n=228)samples were collected over a one-year period at the Shangdianzi(SDZ)station,which is a Global Atmospheric Watch regional background station in North China.The chemical and optical characteristics of PM_(2.5)were analyzed,including organic carbon,elemental carbon,water-soluble organic carbon,water-soluble inorganic ions,and fluorescent components of watersoluble organic matter.The source factors of major aerosol components are apportioned,and the sources of the fluorescent chromophores are further analyzed.The major chemical components of PM_(2.5)at SDZ were NO_(3)^(-),organic matter,SO_(4)^(2-),and NH_(4)^(+).Annually,water-soluble organic carbon contributed 48%±15%to the total organic carbon.Secondary formation(52%)and fossil fuel combustion(63%)are the largest sources of water-soluble organic matter and water-insoluble organic matter,respectively.In addition,three humic-like and one protein-like matter were identified via parallel factor analysis for excitation–emission matrices.The fluorescence intensities of the components were highest in winter and lowest in summer,indicating the main impact of burning sources.This study contributes to understanding the chemical and optical characteristics of ambient aerosols in the background atmosphere.

Candidiasis Treatment Should Pay Attention to the Immune Changing Patients

The guideline of the Infectious Diseases Society of America (IDSA) about candidiasis is a key standard for clinical doctors to treat patients, and textbook to teach medical students. However, in the progress of clinical treatment and documents checking, the immune changing patients, who suffered candidiasis, may be mismatched to the clinical treatment guidelines. The opinion could be shown by the literature of gastrointestinal system, and respiratory system, which suffered severely fungal infection mostly, mainly connected with the outside world and inside organ systems of the human body. They could show some patients have been excess treatment, and we should pay attention to the immune changing patients.

Boosted lithium storage performance by local build-in electric field derived by oxygen vacancies in 3D holey N-doped carbon structure decorated with molybdenum dioxide

Three-dimensional holey nitrogen-doped carbon matrixes decorated with molybdenum dioxide(MoO_(2))nanoparticles have been successfully synthesized via a NaCl-assisted template strategy.The obtained MoO_(2)/C composites offered multi-advantages,including higher specific surface area,more active sites,more ions/electrons transmission channels,and shorter transmission path due to the synergistic effect of the uniformly distributed MoO_(2) nanoparticles and porous carbon structure.Especially,the oxygen vacancies were introduced into the prepared composites and enhanced the Li^(+)intercalation/deintercalation process during electrochemical cycling by the Coulomb force.The existence of the local built-in electric field was proved by experimental data,differential charge density distribution,and density of states calculation.The uniquely designed structure and introduced oxygen vacancy defects endowed the MoO_(2)/C composites with excellent electrochemical properties.In view of the synergistic effect of the uniquely designed morphology and introduced oxygen vacancy defects,the MoO_(2)/C composites exhibited superior electrochemical performance of a high capacity of 918.2 mAh g^(-1) at 0.1 A g^(-1) after 130 cycles,562.1 mAh g^(-1) at 1.0 A g^(-1) after 1000 cycles,and a capacity of 181.25 mAh g^(-1) even at 20.0 A g^(-1).This strategy highlights the path to promote the commercial application of MoO_(2)-based and other transition metal oxide electrodes for energy storage devices.

PAN-LATP复合固态电解质的制备与性能表征

与传统的液态电解质相比,固态聚合物电解质可以显著提高锂二次电池的安全性和能量密度,但其室温锂离子传导率低、机械性能比较差,这些缺点限制了固态聚合物电解质在锂二次电池中的应用.为了解决上述问题,本文采用溶液浇铸法在聚丙烯腈(PAN)固态聚合物电解质中引入无机固态电解质Li_(1.3)Al_(0.3)Ti_(1.7)(PO_4)_3(LATP)制备了PAN-LATP复合固态电解质(CSE).该复合固态电解质不仅具有较高的锂离子电导率,还拓宽了电化学稳定窗口.当LATP含量为15%时CSE的锂离子传导率最高,室温下为2.14×10^(-5)S/cm,333 K时为3.03×10^(-4)S/cm.与此同时,固态聚合物电解质的机械强度也得到了很好的改善.结果表明该性能优良的固态电解质有望用于锂离子电池和其他电化学储能系统.

Hybrid electrolyte with robust garnet-ceramic electrolyte for lithium anode protection in lithium-oxygen batteries

Rechargeable lithium-oxygen （Li-O2） batteries have received intensive research interest due to its ultrahigh energy density, while its cycle stability is still hindered by the high reactivity of the Li anode with oxygen and moisture. To alleviate the corrosion of the metallic lithium anodes for achieving a stable Li-O2 battery, and as a proof-of-concept experiment, a distinctive hybrid electrolyte system with an organic/ceramic/organic electrolyte （OCOE） architecture is designed. Importantl~ the cycle number of Li-O2 batteries with OCOE is significantly improved compared with batteries with an organic electrolyte （OE）. This might be attributed to the effective suppression of the lithium anode corrosion caused by the OE degradation and the crossover of oxygen from the cathode. We consider that our facile, low-cost, and highly effective lithium protection strategy presents a new avenue to address the daunting corrosion problem of lithium metal anodes in Li-O2 batteries. In addition, the proposed strategy can be easily extended to other metal-O2 battery systems, such as Na-O2 batteries.

Significant contribution of secondary particulate matter to recurrent air pollution:Evidence from in situ observation in the most polluted city of Fen-Wei Plain of China

Particulate matter(PM_(2.5))pollution in high emission regions will affect air quality,human health and climate change on both local and regional scales,and thus attract worldwide attention.In this study,a comprehensive study on PM_(2.5)and its chemical composition were performed in Yuncheng(the most polluted city of Fen-Wei Plain of China)from November28,2020 to January 24,2021.The average concentration of PM_(2.5)was 87.8±52.0μg/m^(3),which were apparently lower than those observed during the same periods of past five years,attributable to the clean air action plan implemented in this region.NO_(3)^(-)and organic carbon(OC)were the dominant particulate components,which on average contributed 22.6%and16.5%to PM_(2.5)2.5,respectively.The fractions of NO_(3)^(-),NH_(4)^(+),OC and trace metals increased while those of crustal materials and elemental carbon decreased with the degradation of PM_(2.5)pollution.Six types of PM_(2.5)sources were identified by the PM_(2.5)F model,including secondary inorganic aerosol(35.3%),coal combustion(28.7%),vehicular emission(20.7%),electroplating industry(8.6%),smelt industry(3.9%)and dust(2.8%).Locations of each identified source were pinpointed based on conditional probability function,potential source contribution function and concentration weighted trajectory,which showed that the geographical distribution of the sources of PM_(2.5)roughly agreed with the areas of high emission.Overall,this study provides valuable information on atmospheric pollution and deems beneficial for policymakers to take informed action to sustainably improve air quality in highly polluted region.

Emission factors of polycyclic aromatic hydrocarbons from domestic coal combustion in China

Domestic coal stove is widely used in China, especially for countryside during heating period of winter, and polycyclic aromatic hydrocarbons （PAHs） are important in flue gas of the stove. By using dilution tunnel system, samples of both gaseous and particulate phases from domestic coal combustion were collected and 18 PAH species were analyzed by GC-MS. The average emission factors of total 18 PAH species was 171.73 mg/kg, ranging from 140.75 to 229.11 mg/kg for bituminous coals, while was 93.98 mg/kg, ranging from 58.48 to 129.47 mg/kg for anthracite coals. PAHs in gaseous phases occupied 95% of the total of PAHs emission of coal combustion. In particulate phase, 3-ring and 4- ring PAHs were the main components, accounting for 80% of the total particulate PAHs. The total toxicity potency evaluated by benzo[a]pyrene-equivalent carcinogenic power, sum of 7 carcinogenic PAH components and 2,3,7,8-tetrachlorodibenzodioxin had a similar tendency. And as a result, the toxic potential of bituminous coal was higher than that of anthracite coal. Efficient emission control should be conducted to reduce PAH emissions in order to protect ecosystem and human health.

Highly time-resolved aerosol characteristics during springtime in Weizhou Island

A single particle aerosol mass spectrometer was deployed to measure the changes of single particle species and sizes during March 2015 in Weizhou Island of the Beibu Gulf, Guangxi province, South China. In this campaign, a total of 3,100,597 particles were sized, and 25.8%particles with both positive and negative mass spectrum were collected and 24.8%characterized in combination with the ART-2 a neural network algorithm. The distribution of sized particles was mainly in from 520 to 600 nm, and the diameters ranging from 340 to1000 nm accounted for above 90%. Eight types of particles were classified： Elemental Carbon containing（EC）, Organic Carbon containing（OC）, EC and OC combined containing particles,Na containing particles, K containing particles（K）, Levoglucosan containing particles,mineral containing particles, and Heavy Metal containing particles（HM）. EC, OC and K were the major containing particles, which accounted for 84.3% in the eight types particles. The relative ratio and size distribution of the three types were EC（48.1%, 620 nm）, OC（12.7%,440 nm）, and K（23.5%, 600 nm）, respectively. The three types of particles were a bit increasing ratios compared with those in clean periods during haze pollution periods.Combined with the back-trajectory results from the Hysplit-4 model and local pollution sources revealed that the ambient air quality on the Weizhou Island may be influenced by biomass burning in the Indochina Peninsula（biomass burning in the Indochina Peninsula）from the transportation on higher level atmospheric layer and by mainland of south China located northeast of Weizhou Island on the ground.

Characteristics of particulate-bound polycyclic aromatic hydrocarbons emitted from industrial grade biomass boilers

Polycyclic aromatic hydrocarbons（PAHs） are carcinogenic or mutagenic and are important toxic pollutants in the flue gas of boilers. Two industrial grade biomass boilers were selected to investigate the characteristics of particulate-bound PAHs： one biomass boiler retro-fitted from an oil boiler（BB1） and one specially designed（BB2） biomass boiler. One coal-fired boiler was also selected for comparison. By using a dilution tunnel system, particulate samples from boilers were collected and 10 PAH species were analyzed by gas chromatography–mass spectrometry（GC–MS）. The total emission factors（EFs） of PAHs ranged from 0.0064 to0.0380 mg/kg, with an average of 0.0225 mg/kg, for the biomass boiler emission samples. The total PAH EFs for the tested coal-fired boiler were 1.8 times lower than the average value of the biomass boilers. The PAH diagnostic ratios for wood pellets and straw pellets were similar.The ratio of indeno（1,2,3-cd）pyrene/[indeno（1,2,3-cd）pyrene ＋ benzo（g,h,i）perylene] for the two biomass boilers was lower than those of the reference data for other burning devices, which can probably be used as an indicator to distinguish the emission of biomass boilers from that of industrial coal-fired boilers and residential stoves. The toxic potential of the emission from wood pellet burning was higher than that from straw pellet burning, however both of them were much lower than residential stove exhausts.