Raman spectroscopy was used to measure Raman spectra of the inner SiC fibers and surface C-rich layers of SiC fibers, composite precursors and SiCf/Ni-Cr-Al composites. The residual stresses of the inner SiC fibers an...Raman spectroscopy was used to measure Raman spectra of the inner SiC fibers and surface C-rich layers of SiC fibers, composite precursors and SiCf/Ni-Cr-Al composites. The residual stresses of the inner SiC fibers and surface C-rich layers were calculated, and the effect of the(Al + Al_2O_3) diffusion barrier layer on the interfacial residual stress in the composites was analyzed in combination with the interface microstructure and energy disperse spectroscopy(EDS) elements lining maps. The results show that the existence of(Al + Al_2O_3) diffusion barrier improves the compatibility of the SiCf/Ni-Cr-Al interface,inhibits the adverse interfacial reaction, and relieves the residual stress inside SiC fibers and at the interface of composite material. Heat treatment can reduce the residual stress at the interface. As the heat treatment time increases, the residual stress at the interface decreases.展开更多
In this work,the effects of Cr and Al contents on the preparation of SiC fiber-reinforced NiCrAl alloy matrix composites(SiCf/Ni-20Cr-5Al,SiCf/Ni-15Cr-5Al,SiCf/Ni-10Cr-5Al and SiCf/Ni-10Cr-3Al)were thoroughly discusse...In this work,the effects of Cr and Al contents on the preparation of SiC fiber-reinforced NiCrAl alloy matrix composites(SiCf/Ni-20Cr-5Al,SiCf/Ni-15Cr-5Al,SiCf/Ni-10Cr-5Al and SiCf/Ni-10Cr-3Al)were thoroughly discussed.The composites were prepared by vacuum hot pressing process using matrix-coated fibers.It was found that Cr solute atoms played a significant role in retarding the recrystallization of NiCrAl alloy matrix,and the Al elements in the form of γ'-Ni3Al phase had a suppression effect on the plastic flow of the matrix.Therefore,the reduction in Cr and Al contents was conductive to the recrystallization and plastic flow of NiCrAl alloy matrix,thereby reduced the size and number of micro-voids in the composite.In addition,this work provides some guidance for designing and manufacturing reasonable SiC fiber-reinforced Ni alloy matrix composites.展开更多
基金supported by the National Natural Science Foundation of China(No.51371170)
文摘Raman spectroscopy was used to measure Raman spectra of the inner SiC fibers and surface C-rich layers of SiC fibers, composite precursors and SiCf/Ni-Cr-Al composites. The residual stresses of the inner SiC fibers and surface C-rich layers were calculated, and the effect of the(Al + Al_2O_3) diffusion barrier layer on the interfacial residual stress in the composites was analyzed in combination with the interface microstructure and energy disperse spectroscopy(EDS) elements lining maps. The results show that the existence of(Al + Al_2O_3) diffusion barrier improves the compatibility of the SiCf/Ni-Cr-Al interface,inhibits the adverse interfacial reaction, and relieves the residual stress inside SiC fibers and at the interface of composite material. Heat treatment can reduce the residual stress at the interface. As the heat treatment time increases, the residual stress at the interface decreases.
基金financially supported by the National Natural Science Foundation of China(No.51371170)。
文摘In this work,the effects of Cr and Al contents on the preparation of SiC fiber-reinforced NiCrAl alloy matrix composites(SiCf/Ni-20Cr-5Al,SiCf/Ni-15Cr-5Al,SiCf/Ni-10Cr-5Al and SiCf/Ni-10Cr-3Al)were thoroughly discussed.The composites were prepared by vacuum hot pressing process using matrix-coated fibers.It was found that Cr solute atoms played a significant role in retarding the recrystallization of NiCrAl alloy matrix,and the Al elements in the form of γ'-Ni3Al phase had a suppression effect on the plastic flow of the matrix.Therefore,the reduction in Cr and Al contents was conductive to the recrystallization and plastic flow of NiCrAl alloy matrix,thereby reduced the size and number of micro-voids in the composite.In addition,this work provides some guidance for designing and manufacturing reasonable SiC fiber-reinforced Ni alloy matrix composites.