From the idea of failure of defective structures at high temperature beingcontrolled by two mechanisms: fast fracture due to creep crack growth initiating at the crack tipand creep rupture on the weakened section, a t...From the idea of failure of defective structures at high temperature beingcontrolled by two mechanisms: fast fracture due to creep crack growth initiating at the crack tipand creep rupture on the weakened section, a time-dependent failure assessment diagram (TDFAD) isdeveloped on the basis of the time dependent crack tip parameter J integral. According to theproposed TDFAD method, detailed crack initiation and creep crack growth analysis is avoided insafety assessments of high temperature structures by performing simple calculations of stressintensity factor and limit load. To evaluate the creep toughness parameter K_(mat), three differentexpressions are suggested on the basis of experimental load-line displacement, creep crackinitiation and growth parameters as well as the isochronous stress-strain curve. The influence ofservice factors such as temperature and service-time on the proposed TDFAD is discussed by using theproperties of 2.25CrlMo steel and an example is also presented to illustrate the approach.展开更多
文摘From the idea of failure of defective structures at high temperature beingcontrolled by two mechanisms: fast fracture due to creep crack growth initiating at the crack tipand creep rupture on the weakened section, a time-dependent failure assessment diagram (TDFAD) isdeveloped on the basis of the time dependent crack tip parameter J integral. According to theproposed TDFAD method, detailed crack initiation and creep crack growth analysis is avoided insafety assessments of high temperature structures by performing simple calculations of stressintensity factor and limit load. To evaluate the creep toughness parameter K_(mat), three differentexpressions are suggested on the basis of experimental load-line displacement, creep crackinitiation and growth parameters as well as the isochronous stress-strain curve. The influence ofservice factors such as temperature and service-time on the proposed TDFAD is discussed by using theproperties of 2.25CrlMo steel and an example is also presented to illustrate the approach.
