Growth of β-Ga_2O_3 Films on Sapphire by Hydride Vapor Phase Epitaxy

Two-inch Ga_2O_3 films with（ˉ201）-orientation are grown on c-sapphire at 850–1050°C by hydride vapor phase epitaxy. High-resolution x-ray diffraction shows that pure β-Ga_2O_3 with a smooth surface has a higher crystal quality, and the Raman spectra reveal a very small residual strain in β-Ga_2O_3 grown by hydride vapor phase epitaxy compared with bulk single crystal. The optical transmittance is higher than 80% in the visible and near-UV regions, and the optical bandgap energy is calculated to be 4.9 e V.

Comparison study of GaN films grown on porous and planar GaN templates

The GaN thick films have been grown on porous GaN template and planar metal-organic chemical vapor deposition(MOCVD)-GaN template by halide vapor phase epitaxy(HVPE). The analysis results indicated that the GaN films grown on porous and planar GaN templates under the same growth conditions have similar structural, optical, and electrical properties. But the porous GaN templates could significantly reduce the stress in the HVPE-GaN epilayer and enhance the photoluminescence(PL) intensity. The voids in the porous template were critical for the strain relaxation in the GaN films and the increase of the PL intensity. Thus, the porous GaN converted from β-Ga2O3 film as a novel promising template is suitable for the growth of stress-free GaN films.

Synthesis and characterization of β-Ga_2O_3@GaN nanowires

In this work, we prepared the β-Ga_2O_3@GaN nanowires(NWs) by oxidizing GaN NWs. High-quality hexagonal wurtzite GaN NWs were achieved and the conversion from GaN to β-Ga_2O_3 was confirmed by x-ray diffraction, Raman spectroscopy and transmission electron microscopy. The effect of the oxidation temperature and time on the oxidation degree of GaN NWs was investigated systematically. The oxidation rate of GaN NWs was estimated at different temperatures.

Study on the nitridation of β-Ga2O3 films

Single-crystal GaN layers have been obtained by nitridingβ-Ga2O3 films in NH3 atmosphere.The effect of the temperature and time on the nitridation and conversion of Ga2O3 films have been investigated.The nitridation process results in lots of holes in the surface of films.The higher nitridation temperature and longer time can promote the nitridation and improve the crystal quality of GaN films.The converted Ga N porous films show the single-crystal structures and lowstress,which can be used as templates for the epitaxial growth of high-quality GaN.

High-efficiency InGaN/AlInGaN multiple quantum wells with lattice-matched AlInGaN superlattices barrier

A new approach to fabricating high-quality AlInGaN film as a lattice-matched barrier layer in multiple quantum wells（MQWs） is presented. The high-quality AlInGaN film is realized by growing the AlGaN/InGaN short period superlattices through metalorganic chemical vapor deposition, and then being used as a barrier in the MQWs. The crystalline quality of the MQWs with the lattice-matched AlInGaN barrier and that of the conventional InGaN/GaN MQWs are characterized by x-ray diffraction and scanning electron microscopy. The photoluminescence（PL） properties of the InGaN/AlInGa N MQWs are investigated by varying the excitation power density and temperature through comparing with those of the InGaN/GaN MQWs. The integral PL intensity of InGaN/AlInGaN MQWs is over 3 times higher than that of InGaN/GaN MQWs at room temperature under the highest excitation power. Temperature-dependent PL further demonstrates that the internal quantum efficiency of InGaN/AlInGaN MQWs（76.1%） is much higher than that of InGaN/GaN MQWs（21%）.The improved luminescence performance of InGaN/AlInGaN MQWs can be attributed to the distinct reduction of the barrier-well lattice mismatch and the strain-induced non-radiative recombination centers.