An improved large eddy simulation using a dynamic second-order sub-grid-scale （SGS） stress model has been developed to model the governing equations of dense turbulent particle-liquid two-phase flows in a rotating c...An improved large eddy simulation using a dynamic second-order sub-grid-scale （SGS） stress model has been developed to model the governing equations of dense turbulent particle-liquid two-phase flows in a rotating coordinate system, and continuity is conserved by a mass-weighted method to solve the filtered governing equations. In the cur- rent second-order SGS model, the SGS stress is a function of both the resolved strain-rate and rotation-rate tensors, and the model parameters are obtained from the dimensional consistency and the invariants of the strain-rate and the rotation-rate tensors. In the numerical calculation, the finite volume method is used to discretize the governing equations with a staggered grid system. The SIMPLEC algorithm is applied for the solution of the discretized governing equations. Body- fitted coordinates are used to simulate the two-phase flows in complex geometries. Finally the second-order dynamic SGS model is successfully applied to simulate the dense turbu-lent particle-liquid two-phase flows in a centrifugal impeller. The predicted pressure and velocity distributions are in good agreement with experimental results.展开更多
Lattice Boltzmannmodel(LBM)in conjunction with an accurate Large Eddy Simulation(LES)technology was proposed to simulate various vortical structures and their evolutions in open pump intakes.The strain rate tensor in ...Lattice Boltzmannmodel(LBM)in conjunction with an accurate Large Eddy Simulation(LES)technology was proposed to simulate various vortical structures and their evolutions in open pump intakes.The strain rate tensor in the LES model is locally calculated by means of non-equilibrium moments based on Chapman-Enskog expansion,and bounce-back scheme was used for non-slip condition on solid walls and reflection scheme for free surface.The presentedmodel was applied to investigate free-surface and wall-attached vortices for different water levels and flow rate.The vortex position,shapes and vorticities were predicted successfully under three flowing cases(i.e.critical water level(CWL),lower water level,lower flow rate),and the numerical velocity and streamline distribution were analyzed systematically.For CWL based on Froude number considering open channel flows,the shape and the location of various dynamic vortices were captured.Compare to the experimental results of CWL,more vortices were predicted for lower water level,and less vortices were observed for lower flow rate.The predicted velocities and vortex locations are in good agreement with the experimental of a small physical model.The comparisons demonstrated the feasibility and stability of above-mentioned model and numerical method in predicting vortex flows inside open pump intakes.展开更多
基金the National Natural Science Foundation of China(50779069 and 90510007)the Start-up Scientific Research Foundation of China Agricultural University(2006021)the Beijing Natural Science Foundation(3071002).
文摘An improved large eddy simulation using a dynamic second-order sub-grid-scale （SGS） stress model has been developed to model the governing equations of dense turbulent particle-liquid two-phase flows in a rotating coordinate system, and continuity is conserved by a mass-weighted method to solve the filtered governing equations. In the cur- rent second-order SGS model, the SGS stress is a function of both the resolved strain-rate and rotation-rate tensors, and the model parameters are obtained from the dimensional consistency and the invariants of the strain-rate and the rotation-rate tensors. In the numerical calculation, the finite volume method is used to discretize the governing equations with a staggered grid system. The SIMPLEC algorithm is applied for the solution of the discretized governing equations. Body- fitted coordinates are used to simulate the two-phase flows in complex geometries. Finally the second-order dynamic SGS model is successfully applied to simulate the dense turbu-lent particle-liquid two-phase flows in a centrifugal impeller. The predicted pressure and velocity distributions are in good agreement with experimental results.
基金This work was supported by the National Natural Science Foundation of China(Grant Nos.51479196,51179192,51139007)the Program for New Century Excellent Talents in University(NCET)(Grant No.NETC-10-0784).
文摘Lattice Boltzmannmodel(LBM)in conjunction with an accurate Large Eddy Simulation(LES)technology was proposed to simulate various vortical structures and their evolutions in open pump intakes.The strain rate tensor in the LES model is locally calculated by means of non-equilibrium moments based on Chapman-Enskog expansion,and bounce-back scheme was used for non-slip condition on solid walls and reflection scheme for free surface.The presentedmodel was applied to investigate free-surface and wall-attached vortices for different water levels and flow rate.The vortex position,shapes and vorticities were predicted successfully under three flowing cases(i.e.critical water level(CWL),lower water level,lower flow rate),and the numerical velocity and streamline distribution were analyzed systematically.For CWL based on Froude number considering open channel flows,the shape and the location of various dynamic vortices were captured.Compare to the experimental results of CWL,more vortices were predicted for lower water level,and less vortices were observed for lower flow rate.The predicted velocities and vortex locations are in good agreement with the experimental of a small physical model.The comparisons demonstrated the feasibility and stability of above-mentioned model and numerical method in predicting vortex flows inside open pump intakes.
