Research progress in hydrate-based technologies and processes in China:A review

Natural gas hydrate(NGH) is considered as an alternative energy resource in the future as it is proven to contain about 2 times carbon resources of those contained in the fossil energy on Earth. Gas hydrate technology is a new technology which can be extensively used in methane production from NGH, gas separation and purification, gas transportation, sea–water desalination, pipeline safety and phase change energy storage, etc. Since the 1980s, the gas hydrate technology has become a research hotspot worldwide because of its relatively economic and environmental friendly characteristics. China is a big energy consuming country with coal as a dominant energy.With the development of the society, energy shortage and environmental pollution are becoming great obstacles to the progress of the country. Therefore, in order to ensure the sustainable development of the society, it is of great significance to develop and utilize NGH and vigorously develop the gas hydrate technology. In this paper,the research advances in hydrate-based processes in China are comprehensively reviewed from different aspects,mainly including gas separation and purification, hydrate formation inhibition, sea–water desalination and methane exploitation from NGH by CH4–CO2 replacement. We are trying to show the relevant research in China, and at the same time, summarize the characteristics of the research and put forward the corresponding problems in a technical way.

Numerical studies of hydrate dissociation and gas production behavior in porous media during depressurization process

In this study,a numerical model is developed to investigate the hydrate dissociation and gas production in porous media by depressurization.A series of simulation runs are conducted to study the impacts of permeability characteristics,including permeability reduction exponent,absolute permeability,hydrate accumulation habits and hydrate saturation,sand average grain size and irreducible water saturation.The effects of the distribution of hydrate in porous media are examined by adapting conceptual models of hydrate accumulation habits into simulations to govern the evolution of permeability with hydrate decomposition,which is also compared with the conventional reservoir permeability model,i.e.Corey model.The simulations show that the hydrate dissociation rate increases with the decrease of permeability reduction exponent,hydrate saturation and the sand average grain size.Compared with the conceptual models of hydrate accumulation habits,our simulations indicate that Corey model overpredicts the gas production and the performance of hydrate coating models is superior to that of hydrate filling models in gas production,which behavior does follow by the order of capillary coating>pore coating>pore filling>capillary filling.From the analysis of t1/2,some interesting results are suggested as follows:(1) there is a "switch" value(the"switch"absolute permeability) for laboratory-scale hydrate dissociation in porous media,the absolute permeability has almost no influence on the gas production behavior when the permeability exceeds the "switch" value.In this study,the "switch" value of absolute permeability can be estimated to be between 10 and 50 md.(2) An optimum value of initial effective water saturation Sw,e exists where hydrate dissociation rate reaches the maximum and the optimum value largely coincides with the value of irreducible water saturation S wr,e.For the case of Sw,<Swr,e,or Sw,e>Swr,e,there are different control mechanisms dominating the process of hydrate dissociation and gas production.

Investigation of the methane hydrate surface area during depressurization-induced dissociation in hydrate-bearing porous media

The surface area of hydrate during dissociation in porous media is essentially important for the kinetics of hydrate dissociation.In this study,the methane hydrate surface area was investigated by the comparison results of experiments and numerical simulations during hydrate decomposition in porous media.The experiments of methane hydrate depressurizationinduced dissociation were performed in a 1D high pressure cell filled with glass beads,an improved and valid 1D corescale numerical model was developed to simulate gas production.Two conceptual models for hydrate dissociation surface area were proposed based on the morphology of hydrate in porous media,which formed the functional form of the hydrate dissociation surface area with porosity,hydrate saturation and the average radius of sand sediment particles.With the establishment of numerical model for depressurizationinduced hydrate dissociation in porous media,the cumulative gas productions were modeling and compared with the experimental data at the different hydrate saturations.The results indicated that the proposed prediction equations are valid for the hydrate dissociation surface area,and the graincoating surface area model performs well at lower hydrate saturation for hydrate dissociation simulation,whereas at higher hydrate saturation,the hydrate dissociation simulation from the porefilling surface area model is more reasonable.Finally,the sensitivity analysis showed that the hydrate dissociation surface area has a significant impact on the cumulative gas production.