The stress corrosion cracking (SCC) behaviour of X-70 pipeline steel in near-neutral pH solutions was studied via slow strain rate testing (SSRT). The results showed that the cracking mode of X-70 pipeline steel in ne...The stress corrosion cracking (SCC) behaviour of X-70 pipeline steel in near-neutral pH solutions was studied via slow strain rate testing (SSRT). The results showed that the cracking mode of X-70 pipeline steel in near-neutral pH solutions was transgranular at different temperatures and applied potentials with the feature of quasi-cleavage. The pH value of the solution decreased with increasing the addition of CO2, which increased the susceptibility to SCC. SCC susceptibility increased as the applied potential moved towards the cathodic direction, suggesting that hydrogen induced cracking (HIC) dominated the cracking process at cathodic potentials. The slight decrease of pH values with decreasing temperature of the solution increased the susceptibility to SCC, which attributed to the change of solubility of CO2 in the solution at different temperatures. The propagating directions of SCC cracks were different at different potentials. At rather negative cathodic potentials, the cracks were almost perpendicular to the tensile axis, while at free corrosion potential and near anodic potentials, cracks were nearly at 45 degree, and in the range of moderate cathodic potentials both propagating directions could be observed.展开更多
Diamond-like carbon coatings have been used as solid lubricating coatings in vacuum technology for their good physical and chemical properties. In this paper, the hybrid technique of unbalanced magnetron sputtering an...Diamond-like carbon coatings have been used as solid lubricating coatings in vacuum technology for their good physical and chemical properties. In this paper, the hybrid technique of unbalanced magnetron sputtering and plasma immersion ion implantation (Plll) was adopted to fabricate diamond-like carbon-based functionally gradient film, N/TiN/Ti(N,C)/DLC, on the 304 stainless steel substrate. The film was characterized by using Raman spectroscopy and glancing X-ray diffraction (GXRD), and the topography and surface roughness of the film was observed using AFM. The mechanical properties of the film were evaluated by nano-indentation. The results showed that the surface roughness of the film was approximately 0.732 nm. The hardness and elastic modulus, fracture toughness and interfacial fracture toughness of N/TiN/Ti(N,C)/DLC functionally gradient film were about 19.84 GPa, 190.03 GPa, 3.75 MRa.m1/2 and 5.68 MPa.m1/2, respectively. Compared with that of DLC monolayer and C/TiC/DLC multilayer, this DLC gradient film has better qualities as a solid lubricating coating.展开更多
基金This work was supported by the Special Funds for the Major State Basic Research Projects G19990650 in China,also supported by the Science and Technology Commission of Shanghai Municipality via projects 025258036 and 02ZE14031.
文摘The stress corrosion cracking (SCC) behaviour of X-70 pipeline steel in near-neutral pH solutions was studied via slow strain rate testing (SSRT). The results showed that the cracking mode of X-70 pipeline steel in near-neutral pH solutions was transgranular at different temperatures and applied potentials with the feature of quasi-cleavage. The pH value of the solution decreased with increasing the addition of CO2, which increased the susceptibility to SCC. SCC susceptibility increased as the applied potential moved towards the cathodic direction, suggesting that hydrogen induced cracking (HIC) dominated the cracking process at cathodic potentials. The slight decrease of pH values with decreasing temperature of the solution increased the susceptibility to SCC, which attributed to the change of solubility of CO2 in the solution at different temperatures. The propagating directions of SCC cracks were different at different potentials. At rather negative cathodic potentials, the cracks were almost perpendicular to the tensile axis, while at free corrosion potential and near anodic potentials, cracks were nearly at 45 degree, and in the range of moderate cathodic potentials both propagating directions could be observed.
基金The authors are thankful for the financial support of the key lab of precisiok precision processing of harbin institute of technology china ,the help of the school material science and engineering,harbin institute of technology,for the ion implantation e
文摘Diamond-like carbon coatings have been used as solid lubricating coatings in vacuum technology for their good physical and chemical properties. In this paper, the hybrid technique of unbalanced magnetron sputtering and plasma immersion ion implantation (Plll) was adopted to fabricate diamond-like carbon-based functionally gradient film, N/TiN/Ti(N,C)/DLC, on the 304 stainless steel substrate. The film was characterized by using Raman spectroscopy and glancing X-ray diffraction (GXRD), and the topography and surface roughness of the film was observed using AFM. The mechanical properties of the film were evaluated by nano-indentation. The results showed that the surface roughness of the film was approximately 0.732 nm. The hardness and elastic modulus, fracture toughness and interfacial fracture toughness of N/TiN/Ti(N,C)/DLC functionally gradient film were about 19.84 GPa, 190.03 GPa, 3.75 MRa.m1/2 and 5.68 MPa.m1/2, respectively. Compared with that of DLC monolayer and C/TiC/DLC multilayer, this DLC gradient film has better qualities as a solid lubricating coating.
