Laser aided additive manufacturing(LAAM)was used to fabricate bulk Fe_(49.5)Mn_(30)Co_(10)Cr_(10)C_(0.5)interstitial multicomponent alloy using pre-alloyed powder.The room temperature yield strength(σ_y),ultimate ten...Laser aided additive manufacturing(LAAM)was used to fabricate bulk Fe_(49.5)Mn_(30)Co_(10)Cr_(10)C_(0.5)interstitial multicomponent alloy using pre-alloyed powder.The room temperature yield strength(σ_y),ultimate tensile strength(σ_(UTS))and elongation(ε_(UTS))were 645 MPa,917 MPa and 27.0%respectively.The asbuilt sample consisted of equiaxed and dendritic cellular structures formed by elemental segregation.These cellular structures together with oxide particle inclusions were deemed to strengthen the material.The other contributing components include dislocation strengthening,friction stress and grain boundary strengthening.The highε_(UTS)was attributed to dislocation motion and activation of both twinning and transformation-induced plasticity(TWIP and TRIP).Tensile tests performed at-40℃and-130℃demonstrated superior tensile strength of 1041 MPa and 1267 MPa respectively.However,almost no twinning was observed in the fractured sample tested at-40℃and-130℃.Instead,higher fraction of strain-induced hexagonal close-packed(HCP)εphase transformation of 21.2%were observed for fractured sample tested at-40℃,compared with 6.3%in fractured room temperature sample.展开更多
基金Agency for Science,Technology and Research(A*Star),Republic of Singapore,under the IAF-PP program“Integrated large format hybrid manufacturing using wire-fed and powder-blown technology for LAAM process”,Grant No:A1893a0031。
文摘Laser aided additive manufacturing(LAAM)was used to fabricate bulk Fe_(49.5)Mn_(30)Co_(10)Cr_(10)C_(0.5)interstitial multicomponent alloy using pre-alloyed powder.The room temperature yield strength(σ_y),ultimate tensile strength(σ_(UTS))and elongation(ε_(UTS))were 645 MPa,917 MPa and 27.0%respectively.The asbuilt sample consisted of equiaxed and dendritic cellular structures formed by elemental segregation.These cellular structures together with oxide particle inclusions were deemed to strengthen the material.The other contributing components include dislocation strengthening,friction stress and grain boundary strengthening.The highε_(UTS)was attributed to dislocation motion and activation of both twinning and transformation-induced plasticity(TWIP and TRIP).Tensile tests performed at-40℃and-130℃demonstrated superior tensile strength of 1041 MPa and 1267 MPa respectively.However,almost no twinning was observed in the fractured sample tested at-40℃and-130℃.Instead,higher fraction of strain-induced hexagonal close-packed(HCP)εphase transformation of 21.2%were observed for fractured sample tested at-40℃,compared with 6.3%in fractured room temperature sample.
