Numerical simulation and experimental studies on cavity growth were carreed out dur-ing the bulging process of saperplastic magnesium Alloy. A three--dimensional rigid-viscoplastic finite element program has been deve...Numerical simulation and experimental studies on cavity growth were carreed out dur-ing the bulging process of saperplastic magnesium Alloy. A three--dimensional rigid-viscoplastic finite element program has been developed and applied to predict the cav-ity radiusand volume fraction of cavity growth. The final prediction on the cavityradius and volume fraction distribution was exhibited as colorful shade pictures. Theexperimental studies wereperformed under similar conditions to the numerical oneand provided for quantitativecomparison. According to the metallography observation,the radius and volume fraction of cavity growth was quantitative achieved by usingProfound--Iron & steel software. The numerical results were in reasonable quantita-tive agreement with the experiment.展开更多
A newly developed severe plastic deformation （SPD） technique, i.e. repetitive upsetting （RU）, is employed to improve the strength and ductility of a Mg-Gd-Y-Zr alloy. During the RU processing, dynamic recrystalliz...A newly developed severe plastic deformation （SPD） technique, i.e. repetitive upsetting （RU）, is employed to improve the strength and ductility of a Mg-Gd-Y-Zr alloy. During the RU processing, dynamic recrystallization occurs in the Mg alloy, which leads to a significant grain refinement from 11.2 p.m to 2.8 μm. The yield strength （YS）, ultimate tensile strength （UTS） and elongation increase simultaneously with increasing RU passes. The microstructural evolution is affected by processing temperatures. Dynamic recrystallization prevails at low temperatures, while dynamic recovery is the main effect factor at high temperatures. Texture characteristics gradually become random during multiple passes of RU processing, which reduces the tension-compression asymmetry of the Mg-Gd-Y-Zr alloy. 2018 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science ＆ Technology.展开更多
文摘Numerical simulation and experimental studies on cavity growth were carreed out dur-ing the bulging process of saperplastic magnesium Alloy. A three--dimensional rigid-viscoplastic finite element program has been developed and applied to predict the cav-ity radiusand volume fraction of cavity growth. The final prediction on the cavityradius and volume fraction distribution was exhibited as colorful shade pictures. Theexperimental studies wereperformed under similar conditions to the numerical oneand provided for quantitativecomparison. According to the metallography observation,the radius and volume fraction of cavity growth was quantitative achieved by usingProfound--Iron & steel software. The numerical results were in reasonable quantita-tive agreement with the experiment.
基金supported by the National Key R&D Program of China (grant number 2017YFA0204403)the National Natural Science Foundation of China (NSFC) under Grant Nos. 51601003, 51301092, 51404151, 51401172+1 种基金Project supported by Beijing Postdoctoral Research Foundation under Grant No. 2016ZZ-02Project of Science & Technology Department of Sichuan Province (No. 2015HH0012)
文摘A newly developed severe plastic deformation （SPD） technique, i.e. repetitive upsetting （RU）, is employed to improve the strength and ductility of a Mg-Gd-Y-Zr alloy. During the RU processing, dynamic recrystallization occurs in the Mg alloy, which leads to a significant grain refinement from 11.2 p.m to 2.8 μm. The yield strength （YS）, ultimate tensile strength （UTS） and elongation increase simultaneously with increasing RU passes. The microstructural evolution is affected by processing temperatures. Dynamic recrystallization prevails at low temperatures, while dynamic recovery is the main effect factor at high temperatures. Texture characteristics gradually become random during multiple passes of RU processing, which reduces the tension-compression asymmetry of the Mg-Gd-Y-Zr alloy. 2018 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science ＆ Technology.
