Recent studies, focused on dihedral angles and intersection processes, have increased understandings of conjugate fault mechanisms. We present new 3-D seismic data and microstructural core analysis in a case study of ...Recent studies, focused on dihedral angles and intersection processes, have increased understandings of conjugate fault mechanisms. We present new 3-D seismic data and microstructural core analysis in a case study of a large conjugate strike-slip fault system from the intracratonic Tarim Basin, NW China. Within our study area, "X" type NE and NW trending faults occur within Cambrian- Ordovician carbonates. The dihedral angles of these conjugate faults have narrow ranges, 19~ to 62~ in the Cambrian and 26~ to 51~ in the Ordovician, and their modes are 42~ and 44~ respectively. These data are significantly different from the ~60~ predicted by the Coulomb fracture criterion. It is concluded that: (1) The dihedral angles of the conjugate faults were not controlled by confining pressure, which was low and associated with shallow burial; (2) As dihedral angles were not controlled by pressure they can be used to determine the shortening direction during faulting; (3) Sequential slip may have played an important role in forming conjugate fault intersections; (4) The conjugate fault system of the Tarim basin initiated as rhombic joints; these subsequently developed into sequentially active "X" type conjugate faults; followed by preferential development of the NW-trending faults; then reactivation of the NE trending faults. This intact rhombic conjugate fault system presents new insights into mechanisms of dihedral angle development, with particular relevance to intracratonic basins.展开更多
The subduction of the Bangonghu-Nujiang Meso-Tethys and the collision between the Lhasa and Qiangtang blocks were important events in the growth of the Tibetan crust. However, the timing of collision initiation and cl...The subduction of the Bangonghu-Nujiang Meso-Tethys and the collision between the Lhasa and Qiangtang blocks were important events in the growth of the Tibetan crust. However, the timing of collision initiation and closure timing, as well as nature and structure of the Bangonghu ocean basin, are still poorly constrained. The Lagkor Tso ophiolite, located in the south of Gerze County, Tibet, is one of the most completed ophiolites preserved in the southern side of the Bangonghu- Nujiang suture zone. This study discussed the tectonic evolution of the Bangonghu-Nujiang suture zone as revealed by the Lagkor Tso ophiolite investigated by field investigations, petrology, geochemistry, geochronology and tectonic analysis methods. We present new LA-ICP-MS zircon U-Pb and 39Ar/4~Ar ages for the Lagkor Tso ophiolite, in addition to geochemical and platinum-group element (PGE) data presented for the Lagkor Tso ophiolite in Tibet. It is suggested that the ancient Lagkor Tso oceanic basin split in Middle Jurassic (161.2 ± 2.7 Ma - 165.4 ± 3.5 Ma), and experienced a second tectonic emplacement during the Early Cretaceous (137.90 ± 6.39 Ma). The Lagkor Tso ophiolite likely developed in an independent suture zone. The Bangonghu-Nujiang ocean subducted southwards, and the dehydration of the subducting oceanic crust materials caused partial melting of the continental mantle wedge, which formed the second-order expanding center of the obduction dish. This led to inter-arc expansion, followed by the formation of inter-arc and back-arc basins with island arc features, which are represented by ophiolites around the Shiquanhe-Lagkor Tso -Yongzhu region. The tectonic environment presently can be considered to be similar to that of the current Western Pacific, in which a large number of island arc-ocean basin systems are developed.展开更多
The Jiang Tso ophiolite, situated in the middle segment of the Bangong- Nujiang Suture Zone, is a part of the easternmost Qieli Lake ophiolite subzone and is close to the south of Pung Lake ophiolite. The rock associa...The Jiang Tso ophiolite, situated in the middle segment of the Bangong- Nujiang Suture Zone, is a part of the easternmost Qieli Lake ophiolite subzone and is close to the south of Pung Lake ophiolite. The rock association of Jiang Tso ophiolite is relatively complete and is mainly composed of metamorphic peridotite, gabbro and diabase. Comparing with N-MORB, the ophiolite is high in Mg and low in Ti, K, Na, P, and is depleted in Nb, Ta, Hf, Th and enriched in Rb, Sr and Ba. Geochemical characteristics of the Jiang Tso ophiolite indicate it is of a supra-subduction zone type formed in the spreading ridge of back arc basin. The SHRIMP U-Pb dating of zircons from the gabbro yielded a weighted average age of 188.1±4.1 Ma (MSWD=1.4), indicating the Jiang Tso ophiolite was formed in the late stage of early Jurassic. The Sr, Nd isotopic compositions show that the Tethyan mantle domain is the depleted mantle (DM), with enriched mantle domain II (EMII). They have the same Sr, Nd isotopic composition with the India Ocean MORB type.展开更多
Field observation, geochemical signatures and zircon Hf isotope data indicate that Cuomuqu ophiolite in the Bangonghu area was formed in a back-arc basin (BAB) above a supra- subduction zone (SSZ). Zircon U-Pb dat...Field observation, geochemical signatures and zircon Hf isotope data indicate that Cuomuqu ophiolite in the Bangonghu area was formed in a back-arc basin (BAB) above a supra- subduction zone (SSZ). Zircon U-Pb dating of the diabase from the Cuomuqu massif yielded an age of 164.3±1.9 Ma, thus indicating that the ophiolite complex was formed in the Middle Jurassic during back-arc extension of the mature Bangonghu-Nujiang Ocean. The zircon εHf(t) and TDMC values of the plagiogranite are similar to the εHf(t) and TDM of the diabase, respectively. The mode of occurrence of plagiogranites and their bulk-rock and Hf isotope characteristics indicate that they were derived from the mantle, associated with the surrounding gabbro and diabase, and were formed by partial melting of altered and hydrated mafic rocks under shear conditions during lateral drifting of the oceanic crust. The zircon U-Pb age of the plagiogranite is 156.4±1.4 Ma, and it is 7.9 Ma younger than the hosting diabase. In this study, zircon chronological and Hf isotopic data were tentatively analyzed to determine the genesis of plagiogranites in the Cuomuqu ophiolite complex.展开更多
Large-scale Cenozoic magmatic rocks from the interplay between the Indian and Eurasian plate are exposed in the Yulong porphyry copper belt in the northern Jinshajiang-Ailaoshan domain.Alkali-rich magmas along the Yul...Large-scale Cenozoic magmatic rocks from the interplay between the Indian and Eurasian plate are exposed in the Yulong porphyry copper belt in the northern Jinshajiang-Ailaoshan domain.Alkali-rich magmas along the Yulong porphyry copper belt can reveal the tectono-magmatic processes in the Sanjiang region.In this study,we present new zircon U-Pb-Hf isotopes and whole rock geochemistry of Cenozoic granitoids from the Zhalaga area in the northern Yulong porphyry copper belt.The Zircon U-Pb dating results show that the Zhalaga granitic porphyry crystallized at ca.42-38 Ma.These porphyry deposits are depleted in Nb,Ta,Sr,and Ti enriched in alkaline and rare earth elements(REEs),and exhibit high zircon saturation temperatures,that strongly indicate A-type affinity.These data and the generally positiveεHf(t)values(2.0-4.5)suggest the magmas originated from a hybrid of partial melting of subduction-modified lithospheric mantle,possibly triggered by upwelling of the asthenospheric mantle.Geochronological and geochemical data of the current and previous studies distinguish three magmatic phases during the Cenozoic in the Jinshajiang-Ailaoshan region:(1)ca.62-48 Ma;(2)ca.44-30 Ma;and(3)ca.28-16 Ma.The strong collision between the Indian and Eurasian plates produced relatively fast convergence rates during the first episode(ca.62-48 Ma),whereas the subsequent right-lateral strike-slip faulting in the Jinshajiang fault zone initiated at ca.43 Ma is associated with the relatively low India-Eurasia convergence rates during ca.44-30 Ma.These significantly impacted the nature and spatial distribution of the magmatism and the large-scale metallogeny during the Cenozoic in the Sanjiang region.We suggest that the Zhalaga alkali-rich magmas occurred in a transition period from involving soft to hard collisional settings.This remarkable example demonstrates that alkali-rich magmas with A-type affinity are also generated in an orogenic tectonic setting.展开更多
New zircon U–Pb ages, whole-rock geochemistry and zircon Hf isotopes from the Habo porphyry Western Yunnan, China, were determined to provide constraints on the timing of uplift of the Eastern Tibetan Plateau. The in...New zircon U–Pb ages, whole-rock geochemistry and zircon Hf isotopes from the Habo porphyry Western Yunnan, China, were determined to provide constraints on the timing of uplift of the Eastern Tibetan Plateau. The intrusive rocks consist of shoshonitic porphyry(syenite porphyry and monzonite porphyry). Zircon laser ablation inductively coupled plasma mass spectrometry(LA-ICPMS) U–Pb dating indicates coeval emplacement ages of ~35 Ma. The porphyries have alkaline affinities, enrichment in large ion lithophile elements(LILEs) and light rare earth elements(LREEs)(e.g., Rb, Th, U, Pb), with depletion of high field strength elements(HFSEs)(e.g., Nb, Ti, Ta) and weak Eu anomalies. They display uniform Lu–Hf isotopic compositions with negative zircon εHf(t) values ranging from-3.9 to-0.6. The chemical characteristics of the syenite porphyries indicated that they most likely originated from the lower crust, with mantle-derived material involved in their generation. Geochemically, the monzonite porphyries are similar to the syenite porphyries; however, the lower MgO contents suggest that they were produced by different degrees of partial melting of the same lower crust source. Combined with the geochemical and isotopic data in this paper, imply that the alkali-rich porphyries of the Habo polymetallic deposit were derived from the partial melting of lower crust, enriched by mantle magma, formed in a conversion stage from stress extrusion(a strike-slip shear process) to local stress relaxation(a strike-slip pull-apart process) at the Ailaoshao tectonic zone.展开更多
基金partly supportedby National Natural Science Foundation of China(Grant No.41472103)
文摘Recent studies, focused on dihedral angles and intersection processes, have increased understandings of conjugate fault mechanisms. We present new 3-D seismic data and microstructural core analysis in a case study of a large conjugate strike-slip fault system from the intracratonic Tarim Basin, NW China. Within our study area, "X" type NE and NW trending faults occur within Cambrian- Ordovician carbonates. The dihedral angles of these conjugate faults have narrow ranges, 19~ to 62~ in the Cambrian and 26~ to 51~ in the Ordovician, and their modes are 42~ and 44~ respectively. These data are significantly different from the ~60~ predicted by the Coulomb fracture criterion. It is concluded that: (1) The dihedral angles of the conjugate faults were not controlled by confining pressure, which was low and associated with shallow burial; (2) As dihedral angles were not controlled by pressure they can be used to determine the shortening direction during faulting; (3) Sequential slip may have played an important role in forming conjugate fault intersections; (4) The conjugate fault system of the Tarim basin initiated as rhombic joints; these subsequently developed into sequentially active "X" type conjugate faults; followed by preferential development of the NW-trending faults; then reactivation of the NE trending faults. This intact rhombic conjugate fault system presents new insights into mechanisms of dihedral angle development, with particular relevance to intracratonic basins.
基金supported by the National Nature Science Foundation of China (grant No.41372208)China Geological Survey (grant No.1212011221105 and 1212011121259)
文摘The subduction of the Bangonghu-Nujiang Meso-Tethys and the collision between the Lhasa and Qiangtang blocks were important events in the growth of the Tibetan crust. However, the timing of collision initiation and closure timing, as well as nature and structure of the Bangonghu ocean basin, are still poorly constrained. The Lagkor Tso ophiolite, located in the south of Gerze County, Tibet, is one of the most completed ophiolites preserved in the southern side of the Bangonghu- Nujiang suture zone. This study discussed the tectonic evolution of the Bangonghu-Nujiang suture zone as revealed by the Lagkor Tso ophiolite investigated by field investigations, petrology, geochemistry, geochronology and tectonic analysis methods. We present new LA-ICP-MS zircon U-Pb and 39Ar/4~Ar ages for the Lagkor Tso ophiolite, in addition to geochemical and platinum-group element (PGE) data presented for the Lagkor Tso ophiolite in Tibet. It is suggested that the ancient Lagkor Tso oceanic basin split in Middle Jurassic (161.2 ± 2.7 Ma - 165.4 ± 3.5 Ma), and experienced a second tectonic emplacement during the Early Cretaceous (137.90 ± 6.39 Ma). The Lagkor Tso ophiolite likely developed in an independent suture zone. The Bangonghu-Nujiang ocean subducted southwards, and the dehydration of the subducting oceanic crust materials caused partial melting of the continental mantle wedge, which formed the second-order expanding center of the obduction dish. This led to inter-arc expansion, followed by the formation of inter-arc and back-arc basins with island arc features, which are represented by ophiolites around the Shiquanhe-Lagkor Tso -Yongzhu region. The tectonic environment presently can be considered to be similar to that of the current Western Pacific, in which a large number of island arc-ocean basin systems are developed.
基金financially supported by the Tibetan special foundation of China Geological Survey (No.1212011221088 and No.1212011221087)Natural Science Foundation of China (No.41372208 and No.41472054)open foundation of State Key Laboratory of Ore Deposit Geochemistry,Chinese Academy of Sciences (No.201304)
文摘The Jiang Tso ophiolite, situated in the middle segment of the Bangong- Nujiang Suture Zone, is a part of the easternmost Qieli Lake ophiolite subzone and is close to the south of Pung Lake ophiolite. The rock association of Jiang Tso ophiolite is relatively complete and is mainly composed of metamorphic peridotite, gabbro and diabase. Comparing with N-MORB, the ophiolite is high in Mg and low in Ti, K, Na, P, and is depleted in Nb, Ta, Hf, Th and enriched in Rb, Sr and Ba. Geochemical characteristics of the Jiang Tso ophiolite indicate it is of a supra-subduction zone type formed in the spreading ridge of back arc basin. The SHRIMP U-Pb dating of zircons from the gabbro yielded a weighted average age of 188.1±4.1 Ma (MSWD=1.4), indicating the Jiang Tso ophiolite was formed in the late stage of early Jurassic. The Sr, Nd isotopic compositions show that the Tethyan mantle domain is the depleted mantle (DM), with enriched mantle domain II (EMII). They have the same Sr, Nd isotopic composition with the India Ocean MORB type.
基金supported by the National Nature Science Foundation of China [No.41372208 and 41472054]the Foundation of China Geological Survey [No.1212011121259,1212011121262 and 1212011221087]the Open found of the State Key Laboratory of Ore Deposit Geochemistry,CAS [No.201304]
文摘Field observation, geochemical signatures and zircon Hf isotope data indicate that Cuomuqu ophiolite in the Bangonghu area was formed in a back-arc basin (BAB) above a supra- subduction zone (SSZ). Zircon U-Pb dating of the diabase from the Cuomuqu massif yielded an age of 164.3±1.9 Ma, thus indicating that the ophiolite complex was formed in the Middle Jurassic during back-arc extension of the mature Bangonghu-Nujiang Ocean. The zircon εHf(t) and TDMC values of the plagiogranite are similar to the εHf(t) and TDM of the diabase, respectively. The mode of occurrence of plagiogranites and their bulk-rock and Hf isotope characteristics indicate that they were derived from the mantle, associated with the surrounding gabbro and diabase, and were formed by partial melting of altered and hydrated mafic rocks under shear conditions during lateral drifting of the oceanic crust. The zircon U-Pb age of the plagiogranite is 156.4±1.4 Ma, and it is 7.9 Ma younger than the hosting diabase. In this study, zircon chronological and Hf isotopic data were tentatively analyzed to determine the genesis of plagiogranites in the Cuomuqu ophiolite complex.
基金supported by the National Natural Science Foundation of China(No.41776056)Natural Science Foundation of Guangdong Province(Nos.2017A030310395,2018B030311030)China Postdoctoral Science Foundation(grant No.2020M672671)。
文摘Large-scale Cenozoic magmatic rocks from the interplay between the Indian and Eurasian plate are exposed in the Yulong porphyry copper belt in the northern Jinshajiang-Ailaoshan domain.Alkali-rich magmas along the Yulong porphyry copper belt can reveal the tectono-magmatic processes in the Sanjiang region.In this study,we present new zircon U-Pb-Hf isotopes and whole rock geochemistry of Cenozoic granitoids from the Zhalaga area in the northern Yulong porphyry copper belt.The Zircon U-Pb dating results show that the Zhalaga granitic porphyry crystallized at ca.42-38 Ma.These porphyry deposits are depleted in Nb,Ta,Sr,and Ti enriched in alkaline and rare earth elements(REEs),and exhibit high zircon saturation temperatures,that strongly indicate A-type affinity.These data and the generally positiveεHf(t)values(2.0-4.5)suggest the magmas originated from a hybrid of partial melting of subduction-modified lithospheric mantle,possibly triggered by upwelling of the asthenospheric mantle.Geochronological and geochemical data of the current and previous studies distinguish three magmatic phases during the Cenozoic in the Jinshajiang-Ailaoshan region:(1)ca.62-48 Ma;(2)ca.44-30 Ma;and(3)ca.28-16 Ma.The strong collision between the Indian and Eurasian plates produced relatively fast convergence rates during the first episode(ca.62-48 Ma),whereas the subsequent right-lateral strike-slip faulting in the Jinshajiang fault zone initiated at ca.43 Ma is associated with the relatively low India-Eurasia convergence rates during ca.44-30 Ma.These significantly impacted the nature and spatial distribution of the magmatism and the large-scale metallogeny during the Cenozoic in the Sanjiang region.We suggest that the Zhalaga alkali-rich magmas occurred in a transition period from involving soft to hard collisional settings.This remarkable example demonstrates that alkali-rich magmas with A-type affinity are also generated in an orogenic tectonic setting.
基金financially supported by the National Natural Science Foundation of China(41372208 and 41776056)Natural Science Foundation of Guangdong Province(2017A030310395)
文摘New zircon U–Pb ages, whole-rock geochemistry and zircon Hf isotopes from the Habo porphyry Western Yunnan, China, were determined to provide constraints on the timing of uplift of the Eastern Tibetan Plateau. The intrusive rocks consist of shoshonitic porphyry(syenite porphyry and monzonite porphyry). Zircon laser ablation inductively coupled plasma mass spectrometry(LA-ICPMS) U–Pb dating indicates coeval emplacement ages of ~35 Ma. The porphyries have alkaline affinities, enrichment in large ion lithophile elements(LILEs) and light rare earth elements(LREEs)(e.g., Rb, Th, U, Pb), with depletion of high field strength elements(HFSEs)(e.g., Nb, Ti, Ta) and weak Eu anomalies. They display uniform Lu–Hf isotopic compositions with negative zircon εHf(t) values ranging from-3.9 to-0.6. The chemical characteristics of the syenite porphyries indicated that they most likely originated from the lower crust, with mantle-derived material involved in their generation. Geochemically, the monzonite porphyries are similar to the syenite porphyries; however, the lower MgO contents suggest that they were produced by different degrees of partial melting of the same lower crust source. Combined with the geochemical and isotopic data in this paper, imply that the alkali-rich porphyries of the Habo polymetallic deposit were derived from the partial melting of lower crust, enriched by mantle magma, formed in a conversion stage from stress extrusion(a strike-slip shear process) to local stress relaxation(a strike-slip pull-apart process) at the Ailaoshao tectonic zone.