Groundwater is an important source of drinking water.Groundwater pollution severely endangers drinking water safety and sustainable social development.In the case of groundwater pollution,the top priority is to identi...Groundwater is an important source of drinking water.Groundwater pollution severely endangers drinking water safety and sustainable social development.In the case of groundwater pollution,the top priority is to identify pollution sources,and accurate information on pollution sources is the premise of efficient remediation.Then,an appropriate pollution remediation scheme should be developed according to information on pollution sources,site conditions,and economic costs.The methods for identifying pollution sources mainly include geophysical exploration,geochemistry,isotopic tracing,and numerical modeling.Among these identification methods,only the numerical modeling can recognize various information on pollution sources,while other methods can only identify a certain aspect of pollution sources.The remediation technologies of groundwater can be divided into in-situ and ex-situ remediation technologies according to the remediation location.The in-situ remediation technologies enjoy low costs and a wide remediation range,but their remediation performance is prone to be affected by environmental conditions and cause secondary pollution.The ex-situ remediation technologies boast high remediation efficiency,high processing capacity,and high treatment concentration but suffer high costs.Different methods for pollution source identification and remediation technologies are applicable to different conditions.To achieve the expected identification and remediation results,it is feasible to combine several methods and technologies according to the actual hydrogeological conditions of contaminated sites and the nature of pollutants.Additionally,detailed knowledge about the hydrogeological conditions and stratigraphic structure of the contaminated site is the basis of all work regardless of the adopted identification methods or remediation technologies.展开更多
Microplastic pollution is widely distributed from surface water to sediments to groundwater vertically and from land to the ocean horizontally.This study collected samples from surface water,groundwater,and sediments ...Microplastic pollution is widely distributed from surface water to sediments to groundwater vertically and from land to the ocean horizontally.This study collected samples from surface water,groundwater,and sediments from upper to lower reaches and then to the estuary in 16 typical areas in the Jinjiang River Basin,Fujian Province,China.Afterward,it determined the components and abundance of the microplastics and analyzed the possible microplastic sources through principal component analysis(PCA).As a result,seven main components of microplastics were detected,i.e.,polyethylene(PE),polypropylene(PP),polyvinyl chloride(PVC),polyethylene terephthalate(PET),polyformaldehyde(POM),nylon 6(PA6),and polystyrene(PS).Among them,PE and PP were found to have the highest proportion in the surface water and sediments and in the groundwater,respectively.The surface water,groundwater,and sediments had average microplastic abundance of 1.6 n/L,2.7 n/L and 33.8 n/kg,respectively.The microplastics in the sediments had the largest particle size,while those in the groundwater had the smallest particle size.Compared with water bodies and sediments in other areas,those in the study area generally have medium-low-level microplastic abundance.Three pollution sources were determined according to PCA,i.e.,the dominant agriculture-forestry-fishery source,domestic wastewater,and industrial production.This study can provide a scientific basis for the control of microplastics in rivers.展开更多
The small and medium-sized river basins along southeast coast of China hold comparatively abundant water resources.However,the rapid resources urbanization in recent years has produced a series of water problems such ...The small and medium-sized river basins along southeast coast of China hold comparatively abundant water resources.However,the rapid resources urbanization in recent years has produced a series of water problems such as deterioration of river water quality,water shortage and exacerbated floods,which have constrained urban economic development.By applying the principle of triple supply-demand equilibrium,this paper focuses on the estimation of levels of water supply and demand in 2030 at different guarantee probabilities,with a case study of Xiamen city.The results show that water shortage and inefficient utilization are main problems in the city,as the future water supply looks daunting,and a water shortage may hit nearly 2×10^(8)m^(3)in an extraordinarily dry year.Based on current water supply-demand gap and its trend,this paper proposes countermeasures and suggestions for developing and utilizing groundwater resources and improving the utilization rate of water resources,which can supply as a reference for other southeast middle-to-small-sized basin cities in terms of sustainable water resources and water environment protection.展开更多
Arsenic contamination from roxarsone in livestock manure is common,and livestock manure continuously accumulates in the open environment.Evaluations of the environmental processes of As mobilization and transformation...Arsenic contamination from roxarsone in livestock manure is common,and livestock manure continuously accumulates in the open environment.Evaluations of the environmental processes of As mobilization and transformation are critical for predicting the fate of As compounds after roxarsone degradation.In this study,spatiotemporal variations in As species and microbial community structure were characterized using laboratory column experiments with background soil collected from Yanggu County(northern Shandong Plain,China),a region of intense poultry production.Organic and inorganic arsenic were detected by high-performance liquid chromatography(HPLC)and HPLC with hydride generation atomic fluorescence spectrometry(HPLC-HG-AFS),respectively.High-throughput sequencing technology was used to describe microbial diversity.Results showed that roxarsone was transformed completely within 7 days,and A_(s)(Ⅲ)and As(Ⅴ)were the major degradation products.The concentration of A_(s)(Ⅲ)was much lower than that of As(Ⅴ).The A_(s)(Ⅲ)concentration increased significantly after Day 14,whereas the A_(s)(Ⅴ)concentration increased significantly after Day 84,indicating that A_(s)(Ⅲ)was initially produced.The microbial community structure changed significantly as roxarsone transformed into various As compounds.A critical and dominant bacterial strain,norank_f__Family_XVⅢ,was found to be related to the degradation of roxarsone into As(Ⅲ).This study improves our understanding of the fate of As species released from poultry litter to soil and groundwater,which is a threat to human health and environment.展开更多
The geothermal resources in Fujian Province are mainly hydrothermal resources of medium-low temperature.To better understand the whole process and conditions of heat control in the middle and deep crust,this study foc...The geothermal resources in Fujian Province are mainly hydrothermal resources of medium-low temperature.To better understand the whole process and conditions of heat control in the middle and deep crust,this study focuses on the analysis of heat accumulation model in Hongtang Area of Xiamen,and the main conditions of the model such as faults and sags are explored and interpreted in detail by using gravity and wide-field electromagnetic methods.4 main faults(F33,F2,F12 and HT-F1)and 10 secondary faults(HT-F2,HT-F3,HT-F4,HT-F5,HT-F6,HT-F7,HT-F8,HT-F9,HT-F10 and HT-F11)were inferred,and the distribution range of sags was delineated.The convective geothermal system is composed of four components:Heat source,geothermal reservoir,heat-conductive fault and heat retaining cover,which form a quaternary heat accumulation model.According to the model,the intersection of the main faults F12,HTF1 and F33 can be delineated as the primary target area of geothermal exploration,while the intersection of the secondary faults(F12 and HT-F6;F12 and HT-F2;HT-F9,HT-F10 and F12;F12 and HT-F11;F33 and HT-F3;HT-F8 and HT-F3;HT-F2,HT-F10 and HT-F1)can be delineated as the secondary target area.Borehole DR01,which is located in the primary target area,shows that the water temperature increases from fast to slow in the depth range of 0–500 m,and stays at 36℃below 500 m.The reliability of the heat accumulation model and the target area was tested via geothermal boreholes,which is of great significance to the exploitation and utilization of geothermal resources in Hongtang Area of Xiamen.展开更多
基金funded by the National Natural Science Foundation of China(41907175)the Open Fund of Key Laboratory(WSRCR-2023-01)the project of the China Geological Survey(DD20230459).
文摘Groundwater is an important source of drinking water.Groundwater pollution severely endangers drinking water safety and sustainable social development.In the case of groundwater pollution,the top priority is to identify pollution sources,and accurate information on pollution sources is the premise of efficient remediation.Then,an appropriate pollution remediation scheme should be developed according to information on pollution sources,site conditions,and economic costs.The methods for identifying pollution sources mainly include geophysical exploration,geochemistry,isotopic tracing,and numerical modeling.Among these identification methods,only the numerical modeling can recognize various information on pollution sources,while other methods can only identify a certain aspect of pollution sources.The remediation technologies of groundwater can be divided into in-situ and ex-situ remediation technologies according to the remediation location.The in-situ remediation technologies enjoy low costs and a wide remediation range,but their remediation performance is prone to be affected by environmental conditions and cause secondary pollution.The ex-situ remediation technologies boast high remediation efficiency,high processing capacity,and high treatment concentration but suffer high costs.Different methods for pollution source identification and remediation technologies are applicable to different conditions.To achieve the expected identification and remediation results,it is feasible to combine several methods and technologies according to the actual hydrogeological conditions of contaminated sites and the nature of pollutants.Additionally,detailed knowledge about the hydrogeological conditions and stratigraphic structure of the contaminated site is the basis of all work regardless of the adopted identification methods or remediation technologies.
基金funded by National Natural Science Foundation of China(41907175 and 41902259)China Geological Survey project(DD20190303).
文摘Microplastic pollution is widely distributed from surface water to sediments to groundwater vertically and from land to the ocean horizontally.This study collected samples from surface water,groundwater,and sediments from upper to lower reaches and then to the estuary in 16 typical areas in the Jinjiang River Basin,Fujian Province,China.Afterward,it determined the components and abundance of the microplastics and analyzed the possible microplastic sources through principal component analysis(PCA).As a result,seven main components of microplastics were detected,i.e.,polyethylene(PE),polypropylene(PP),polyvinyl chloride(PVC),polyethylene terephthalate(PET),polyformaldehyde(POM),nylon 6(PA6),and polystyrene(PS).Among them,PE and PP were found to have the highest proportion in the surface water and sediments and in the groundwater,respectively.The surface water,groundwater,and sediments had average microplastic abundance of 1.6 n/L,2.7 n/L and 33.8 n/kg,respectively.The microplastics in the sediments had the largest particle size,while those in the groundwater had the smallest particle size.Compared with water bodies and sediments in other areas,those in the study area generally have medium-low-level microplastic abundance.Three pollution sources were determined according to PCA,i.e.,the dominant agriculture-forestry-fishery source,domestic wastewater,and industrial production.This study can provide a scientific basis for the control of microplastics in rivers.
基金This paper was funded by the Geological Survey Project of China Geological Survey"Comprehensive Geological Survey of Xiamen-Zhangzhou-Quanzhou City"(DD20190303).
文摘The small and medium-sized river basins along southeast coast of China hold comparatively abundant water resources.However,the rapid resources urbanization in recent years has produced a series of water problems such as deterioration of river water quality,water shortage and exacerbated floods,which have constrained urban economic development.By applying the principle of triple supply-demand equilibrium,this paper focuses on the estimation of levels of water supply and demand in 2030 at different guarantee probabilities,with a case study of Xiamen city.The results show that water shortage and inefficient utilization are main problems in the city,as the future water supply looks daunting,and a water shortage may hit nearly 2×10^(8)m^(3)in an extraordinarily dry year.Based on current water supply-demand gap and its trend,this paper proposes countermeasures and suggestions for developing and utilizing groundwater resources and improving the utilization rate of water resources,which can supply as a reference for other southeast middle-to-small-sized basin cities in terms of sustainable water resources and water environment protection.
基金This research was funded by National Natural Science Foundation of China(No.41907175 and 41902259)and China Geological Survey project(No.DD20190303).
文摘Arsenic contamination from roxarsone in livestock manure is common,and livestock manure continuously accumulates in the open environment.Evaluations of the environmental processes of As mobilization and transformation are critical for predicting the fate of As compounds after roxarsone degradation.In this study,spatiotemporal variations in As species and microbial community structure were characterized using laboratory column experiments with background soil collected from Yanggu County(northern Shandong Plain,China),a region of intense poultry production.Organic and inorganic arsenic were detected by high-performance liquid chromatography(HPLC)and HPLC with hydride generation atomic fluorescence spectrometry(HPLC-HG-AFS),respectively.High-throughput sequencing technology was used to describe microbial diversity.Results showed that roxarsone was transformed completely within 7 days,and A_(s)(Ⅲ)and As(Ⅴ)were the major degradation products.The concentration of A_(s)(Ⅲ)was much lower than that of As(Ⅴ).The A_(s)(Ⅲ)concentration increased significantly after Day 14,whereas the A_(s)(Ⅴ)concentration increased significantly after Day 84,indicating that A_(s)(Ⅲ)was initially produced.The microbial community structure changed significantly as roxarsone transformed into various As compounds.A critical and dominant bacterial strain,norank_f__Family_XVⅢ,was found to be related to the degradation of roxarsone into As(Ⅲ).This study improves our understanding of the fate of As species released from poultry litter to soil and groundwater,which is a threat to human health and environment.
基金supported by the National Natural Science Foundation of China (Grants Nos. 41902242)the Geological Survey Projects Foundation of the Institute of Hydrogeology and Environmental Geology (Grants Nos. DD20190303, DD20221773)。
文摘The geothermal resources in Fujian Province are mainly hydrothermal resources of medium-low temperature.To better understand the whole process and conditions of heat control in the middle and deep crust,this study focuses on the analysis of heat accumulation model in Hongtang Area of Xiamen,and the main conditions of the model such as faults and sags are explored and interpreted in detail by using gravity and wide-field electromagnetic methods.4 main faults(F33,F2,F12 and HT-F1)and 10 secondary faults(HT-F2,HT-F3,HT-F4,HT-F5,HT-F6,HT-F7,HT-F8,HT-F9,HT-F10 and HT-F11)were inferred,and the distribution range of sags was delineated.The convective geothermal system is composed of four components:Heat source,geothermal reservoir,heat-conductive fault and heat retaining cover,which form a quaternary heat accumulation model.According to the model,the intersection of the main faults F12,HTF1 and F33 can be delineated as the primary target area of geothermal exploration,while the intersection of the secondary faults(F12 and HT-F6;F12 and HT-F2;HT-F9,HT-F10 and F12;F12 and HT-F11;F33 and HT-F3;HT-F8 and HT-F3;HT-F2,HT-F10 and HT-F1)can be delineated as the secondary target area.Borehole DR01,which is located in the primary target area,shows that the water temperature increases from fast to slow in the depth range of 0–500 m,and stays at 36℃below 500 m.The reliability of the heat accumulation model and the target area was tested via geothermal boreholes,which is of great significance to the exploitation and utilization of geothermal resources in Hongtang Area of Xiamen.