The paper firstly analyzes the influence factor on material removal rate of curved optical work-pieces in the bonnet polishing. Then the experiments are conducted to reveal the effects of several polishing parameters ...The paper firstly analyzes the influence factor on material removal rate of curved optical work-pieces in the bonnet polishing. Then the experiments are conducted to reveal the effects of several polishing parameters on the material removal rate when the spherical optical glasses are polished with different curvature radius, such as the decrement of the bonnet, the rotational speed of the bonnet and the curvature radius of the work-piece＇s surface using a bonnet trial-manufacturing machine developed by our assignment groups. In the end, the curvilinear relationships between these parameters and the material removal rate are acquired and the laws of the effects on material removal rate in bonnet polishing by several parameters are given. When the spherical-pieces are polished with smaller curvature radius, it is not proportional to either bonnet decrement or bonnet rotational speed as described by the Preston equation although the removal rate increases as the relative velocity or the applied pressure increases. Therefore, for the purpose of calculating more accurately the material removal of the spherical work-pieces, the Preston equation should be modified and studied further.展开更多
The bonnet tool polishing is a novel, advanced and ultra-precise polishing process, by which the freeform surface can be polished. However, during the past few years, not only the key technology of calculating the dwe...The bonnet tool polishing is a novel, advanced and ultra-precise polishing process, by which the freeform surface can be polished. However, during the past few years, not only the key technology of calculating the dwell time and controlling the surface form in the bonnet polishing has been little reported so far, but also little attention has been paid to research the material removal function of the convex surface based on the geometry model considering the influence of the curvature radius. Firstly in this paper, for realizing the control of the freeform surface automatically by the bonnet polishing, on the basis of the simplified geometric model of convex surface, the calculation expression of the polishing contact spot on the convex surface considering the influence of the curvature radius is deduced, and the calculation model of the pressure distribution considering the influence of the curvature radius on the convex surface is derived by the coordinate transformation. Then the velocity distribution model is built in the bonnet polishing the convex surface. On the basis of the above research and the semi-experimental modified Preston equation obtained from the combination method of experimental and theoretical derivation, the material removal model of the convex surface considering the influence of the curvature radius in the bonnet polishing is established. Finally, the validity of the model through the simulation method has been validated. This research presents an effective prediction model and the calculation method of material removal for convex surface in bonnet polishing and prepares for the bonnet polishing the free surface numerically and automatically.展开更多
An attempt was made to investigate the machinability of Si Cp/Al composites based on the experimental study using mill-grinding processing method. The experiments were carried out on a high-speed CNC machining center ...An attempt was made to investigate the machinability of Si Cp/Al composites based on the experimental study using mill-grinding processing method. The experiments were carried out on a high-speed CNC machining center using integrated abrasive cutting tool. The effects of combined machining parameters, e g, cutting speed（vs）, feed rate（vf）, and depth of cut（ap）, with the same change of material removal rate（MRR） on the mill-grinding force and surface roughness（Ra） were investigated. The formation mechanism of typical machined surface defects was analyzed by SEM. The experimental results reveal that with the same change of material removal rate, lower mill-grinding force values can be gained by increasing depth of cut and feed rate simultaneously at higher cutting speed. With the same change of MRR value, lower surface roughness values can be gained by increasing the feed rate at higher cutting speed, rather than just increasing the depth of cut, or increasing the feed rate and depth of cut simultaneously. The machined surface of Si Cp/Al composites reveals typical defects which can influence surface integrity.展开更多
基金Foundation of Harbin Institute of Technology,China(No.HIT.2001.10)Harbin Municipal Youth Foundation of China(No.2002AFQXJ040).
文摘The paper firstly analyzes the influence factor on material removal rate of curved optical work-pieces in the bonnet polishing. Then the experiments are conducted to reveal the effects of several polishing parameters on the material removal rate when the spherical optical glasses are polished with different curvature radius, such as the decrement of the bonnet, the rotational speed of the bonnet and the curvature radius of the work-piece＇s surface using a bonnet trial-manufacturing machine developed by our assignment groups. In the end, the curvilinear relationships between these parameters and the material removal rate are acquired and the laws of the effects on material removal rate in bonnet polishing by several parameters are given. When the spherical-pieces are polished with smaller curvature radius, it is not proportional to either bonnet decrement or bonnet rotational speed as described by the Preston equation although the removal rate increases as the relative velocity or the applied pressure increases. Therefore, for the purpose of calculating more accurately the material removal of the spherical work-pieces, the Preston equation should be modified and studied further.
基金Supported by Young Teacher Independent Research Subject of Yanshan University of China(Grant No.15LGA002)
文摘The bonnet tool polishing is a novel, advanced and ultra-precise polishing process, by which the freeform surface can be polished. However, during the past few years, not only the key technology of calculating the dwell time and controlling the surface form in the bonnet polishing has been little reported so far, but also little attention has been paid to research the material removal function of the convex surface based on the geometry model considering the influence of the curvature radius. Firstly in this paper, for realizing the control of the freeform surface automatically by the bonnet polishing, on the basis of the simplified geometric model of convex surface, the calculation expression of the polishing contact spot on the convex surface considering the influence of the curvature radius is deduced, and the calculation model of the pressure distribution considering the influence of the curvature radius on the convex surface is derived by the coordinate transformation. Then the velocity distribution model is built in the bonnet polishing the convex surface. On the basis of the above research and the semi-experimental modified Preston equation obtained from the combination method of experimental and theoretical derivation, the material removal model of the convex surface considering the influence of the curvature radius in the bonnet polishing is established. Finally, the validity of the model through the simulation method has been validated. This research presents an effective prediction model and the calculation method of material removal for convex surface in bonnet polishing and prepares for the bonnet polishing the free surface numerically and automatically.
基金Funded by the National Defense Basic Scientific ResearchAerospace Science and Technology Corporation Commonality Technology Research Project
文摘An attempt was made to investigate the machinability of Si Cp/Al composites based on the experimental study using mill-grinding processing method. The experiments were carried out on a high-speed CNC machining center using integrated abrasive cutting tool. The effects of combined machining parameters, e g, cutting speed（vs）, feed rate（vf）, and depth of cut（ap）, with the same change of material removal rate（MRR） on the mill-grinding force and surface roughness（Ra） were investigated. The formation mechanism of typical machined surface defects was analyzed by SEM. The experimental results reveal that with the same change of material removal rate, lower mill-grinding force values can be gained by increasing depth of cut and feed rate simultaneously at higher cutting speed. With the same change of MRR value, lower surface roughness values can be gained by increasing the feed rate at higher cutting speed, rather than just increasing the depth of cut, or increasing the feed rate and depth of cut simultaneously. The machined surface of Si Cp/Al composites reveals typical defects which can influence surface integrity.
