Ultrashort-time liquid phase sintering of high-performance fine-grain tungsten heavy alloys by laser additive manufacturing

Liquid phase sintering(LPS)is a proven technique for preparing large-size tungsten heavy alloys(WHAs).However,for densification,this processing requires that the matrix of WHAs keeps melting for a long time,which simultaneously causes W grain coarsening that degenerates the performance.This work develops a novel ultrashort-time LPS method to form bulk high-performance fine-grain WHAs based on the principle of laser additive manufacturing(LAM).During LAM,the high-entropy alloy matrix(Al_(0.5)Cr_(0.9)FeNi_(2.5)V_(0.2))and W powders were fed simultaneously but only the matrix was melted by laser and most W particles remained solid,and the melted matrix rapidly solidified with laser moving away,producing an ultrashort-time LPS processing in the melt pool,i.e.,laser ultrashort-time liquid phase sintering(LULPS).The extreme short dwell time in liquid(-1/10,000 of conventional LPS)can effectively suppress W grain growth,obtaining a small size of 1/3 of the size in LPS WHAs.Meanwhile,strong convection in the melt pool of LULPS enables a nearly full densification in such a short sintering time.Compared with LPS WHAs,the LULPS fine-grain WHAs present a 42%higher yield strength,as well as an enhanced susceptibility to adiabatic shear banding(ASB)that is important for strong armor-piercing capability,indicating that LULPS can be a promising pathway for forming high-performance WHAs that surpass those prepared by conventional LPS.

A cluster-plus-glue-atom composition design approach designated for multi-principal element alloys

Multi-principal element alloys(MPEAs)have shown extraordinary properties in different fields.However,the composition design of MPEAs is still challenging due to the complicated interactions among principal elements(PEs),and even more challenging with precipitates formation.Precipitation can be either beneficial or detrimental in alloys,thus it is important to control precipitates formation on purpose during alloy design.In this work,cluster-plus-glue-atom model(CGM)composition design method which is usually used to describe short-range order in traditional alloys has been successfully extended to MPEAs for precipitation design.The key challenge of extending CGM to MPEAs is the determination of center atom since there are no solvent or solute in MPEAs.Research has found that the element type of center atom was related not only with chemical affinity,but also with atomic volume difference in MPEAs,which has inevitable effect on atomic arrangement.Based on experimental data of MPEAs with precipitates,it was found that elements with either stronger chemical affinity or larger volume difference with other PEs would occupy the center site of clusters.Therefore,a cluster index(P_(C)),which considers both chemical affinity and atomic volume factors,was proposed to assist the determination of center atom in MPEAs.Based on the approach,a solid-solution Zr-Ti-V-Nb-Al BCC alloy was obtained by inhibiting the precipitation,while precipitation-strengthened Al-Cr-FeNi-V FCC alloy and Al-Co-Cr-Fe-Ni BCC alloy were designed by promoting the precipitation.Corresponding experimental results demonstrated that the approach could provide a relatively simple and accurate predication of precipitation and the compositions of precipitations were in line with PEs in cluster in MPEAs.The research may open an effective way for composition design of MPEAs with desired phase structure.