期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Cu含量和热处理工艺对Al-Si-Mg-Mn-xCu铸造铝合金显微组织和力学性能的影响 被引量:1
1
作者 贾志宏 周广文 +5 位作者 周宏宇 刘飞 丁立鹏 翁瑶瑶 向开云 赵海东 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2024年第3期737-754,共18页
采用三维X射线显微镜、光学显微镜、扫描电子显微镜、透射电子显微镜及硬度测试系统研究Cu含量及热处理工艺对真空压铸Al-Si-Mg-Mn-xCu合金显微组织和力学性能的影响。研究发现,虽然Cu含量增加会提高铸锭中气孔的密度和尺寸,但是Cu添加... 采用三维X射线显微镜、光学显微镜、扫描电子显微镜、透射电子显微镜及硬度测试系统研究Cu含量及热处理工艺对真空压铸Al-Si-Mg-Mn-xCu合金显微组织和力学性能的影响。研究发现,虽然Cu含量增加会提高铸锭中气孔的密度和尺寸,但是Cu添加将促进凝固过程中含Cu初生相(Q-Al_(5)Cu_(2)Mg_(8)Si_(6)和θ-Al_(2)Cu)的形成,从而提高合金性能。合金中形成5种不同结构的初生相,包括共晶Si、α-Al(Fe,Mn)Si、β-Mg_(2)Si、Q-Al_(5)Cu_(2)Mg_(8)Si_(6)和θ-Al_(2)Cu相。随着Cu含量增加,θ相的面积分数迅速增加,α-Al(Fe,Mn)Si相面积分数首先降低,随后缓慢增加,而Q相的变化趋势与α-Al(Fe,Mn)Si相相反。这些初生相在热处理过程中会出现不同的演变规律。在随后的时效处理过程中,Q'和θ'相的协同析出能显著提高合金的时效硬化潜力。 展开更多
关键词 铝硅铸造合金 真空压铸 热处理 显微组织 力学性能 初生相
下载PDF
Effect of pre-straining on structure and formation mechanism of precipitates in Al−Mg−Si−Cu alloy 被引量:4
2
作者 yao-yao weng Zhi-hong JIA +4 位作者 Li-peng DING Jin LIAO Ping-ping ZHANG Ya-qi XU Qing LIU 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2022年第2期436-447,共12页
The effect of pre-straining on the structure and formation mechanism of precipitates in an Al−Mg−Si−Cu alloy was systematically investigated by atomic resolution high-angle annular dark-field scanning transmission ele... The effect of pre-straining on the structure and formation mechanism of precipitates in an Al−Mg−Si−Cu alloy was systematically investigated by atomic resolution high-angle annular dark-field scanning transmission electron microscopy(HAADF-STEM).Elongated and string-like precipitates are formed along the dislocations in the pre-strained Al−Mg−Si−Cu alloy.The precipitates formed along the dislocations exhibit three features:non-periodic atomic arrangement within the precipitate;Cu segregation occurring at the precipitate/α(Al)interface;different orientations presented in one individual precipitate.Four different formation mechanisms of these heterogeneous precipitates were proposed as follows:elongated precipitates are formed independently in the dislocation;string-like precipitates are formed directly along the dislocations;different precipitates encounter to form string-like precipitates;precipitates are connected by other phases or solute enrichment regions.These different formation mechanisms are responsible for forming different atomic structures and morphologies of precipitates. 展开更多
关键词 Al−Mg−Si−Cu alloy pre-straining Cu segregation PRECIPITATE HAADF-STEM
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部