Experimental investigation on the enhanced oil recovery efficiency of polymeric surfactant: Matching relationship with core and emulsification ability

The polymeric surfactant can be used as an efficient agent for enhanced oil recovery(EOR)because of its large bulk viscosity and good interfacial activity.However,there is a sparse understanding of its matching relationship with reservoirs and emulsification occurrence conditions,which may affect its migration and EOR efficiency.One intermolecular association molecule polymeric surfactant(IAM)was synthesized by micellar polymerization and characterized with 1 H NMR,FTIR,and TGA.The matching relationship between IAM and reservoirs was evaluated by comparing the viscosity retention rate of effluent in the core flow experiments.Moreover,the effect of the matching relationship on EOR in the heterogeneous reservoir was clarified with parallel core displacement experiments by considering different flow abilities of IAM in the high-permeability layer.The occurrence conditions of in-situ emulsification of IAM were evaluated via oil-water co-injection experiments under the different injection rates and oil-water ratios.Microscopic visualization displacement was carried out to compare the micro EOR mechanisms of different chemical systems.The results show that IAM features thickening,shearing resistance,viscoelasticity,thermal stability,and interfacial activity.The matching relationship between cores and IAM could be divided as hardly injected,flow limited,and flow smoothly,corresponding to the viscosity retention ratio of<20%,20%-80%,and>80%,respectively.IAM could gain better EOR efficiency(17.69%)when its matching relationship to the high permeability layer was“flow limited”.The defined mixture capillary number shows that only when it is greater than 1×10^(3),the in-situ emulsions can be generated.Compared to HPAM,IAM could reduce IFT and form vortices to more effectively displace film and corner remaining oils by stripping and peeling off crude oil.The formed emulsion accumulated at the pore throat could further increase flow resistance,which benefits swept area enlargement.This work could provide theoretical and data support for the parameters design in the polymeric surfactant practical application.

Nanoparticle-reinforced foam system for enhanced oil recovery(EOR):Mechanistic review and perspective

Boosted by economic development and rising living standards,the world's carbon dioxide emissions remain high.Maintaining temperature rises below 1.5℃ by the end of the century requires rapid global carbon capture and storage implementation.The successful application of carbon capture,utilization,and storage(CCUS)technology in oilfields has become the key to getting rid of this predicament.Foam flooding,as an organic combination of gas and chemical flooding,became popular in the 1950s.Notwithstanding the irreplaceable advantages,as a thermodynamically unstable system,foam's stability has long restricted its development in enhanced oil and gas recovery.With special surface/interface effects and small-size effects,nanoparticles can be used as foam stabilizers to enhance foam stability,thereby improving foam seepage and oil displacement effects in porous media.In this paper,the decay kinetics and the stabilization mechanisms of nanoparticle-reinforced foams were systematically reviewed.The effects of nanoparticle characteristics,including particle concentration,surface wettability,particle size,and type,and reservoir environment factors,including oil,temperature,pressure,and salinity on the foam stabilization ability were analyzed in detail.The seepage and flooding mechanisms of nanoparticle-reinforced foams were summarized as:improving the plugging properties of foams,enhancing the interaction between foams and crude oil,and synergistically adjusting the wettability of reservoir rocks.Finally,the challenges in the practical application of nanoparticle-reinforced foams were highlighted,and the development direction was proposed.The development of nanoparticle-reinforced foam can open the way toward adaptive and evolutive EOR technology,taking one further step towards the high-efficiency production of the petroleum industry.

Mechanism investigation of steam flooding heavy oil by comprehensive molecular characterization

Steam flooding is a widely used technique to enhance oil recovery of heavy oil.Thermal viscosity reduction and distillation effect are considered as two main displacement mechanisms in steam flooding process.However,the molecular composition understanding and contribution for oil production are still unclear.In this study,the composition analysis of the heavy oil was investigated in the core scale steam flooding process with the temperature from 120 to 280℃.The crude oil,produced oils and residual oils were characterized comprehensively by gas chromatography and high-resolution mass spectrometry.It is found that steam flooding preferentially extracts aromatics and remains more resins in the residual oil.Viscosity reduction is the dominant mechanism when steam is injected at a low temperature.Large molecular heteroatoms with high carbon number and high double bond equivalent(DBE)are eluted into the produced oil,while compounds with low carbon number and low DBE are remained in the residual oil.As the steam temperature rises,the increased distillation effect results in the extraction of light hydrocarbons from the residual oil to the produced oil.More small heteroatoms with low carbon number and low DBE enter into the produced oil,especially in the none water cut stage.The compositional difference of produced oils is characterized in DBE versus carbon number distribution of the N and O containing compound classes.This work uses a variety of composition analysis methods to clarify the steam flooding mechanism and provides a novel understanding of steam flooding mechanisms with various temperatures and production stages from the molecular perspective.

Pore-scale investigation of residual oil displacement in surfactant–polymer flooding using nuclear magnetic resonance experiments

Research on the Gangxi III area in the Dagang Oilfield shows that there was still a significant amount of oil remaining in oil reservoirs after many years of polymer flooding.This is a potential target for enhanced oil recovery（EOR）.Surfactant–polymer（SP） flooding is an effective chemical EOR method for mobilizing residual oil and improving displacement efficiency macroscopically,but the microscopic oil displacement efficiency in pores of different sizes is unclear.Nuclear magnetic resonance（NMR） is an efficient method for quantifying oil saturation in the rock matrix and analyzing pore structures.In this paper,the threshold values of different pore sizes were established from the relationship between mercury injection curves and NMR T2 spectrums.The distribution and migration of residual oil in different flooding processes was evaluated by quantitatively analyzing the change of the relaxation time.The oil displaced from pores of different sizes after the water flood,polymer flood,and the SP flood was calculated,respectively.Experimental results indicate that（1） the residual oil in medium pores contributed the most to the incremental oil recovery for the SP flood,ranging from 40 % to 49 %,and small pores usually contributed ／30 %;（2） the residual oil after the SP flood was mainly distributed in small and medium pores;the residual oil in medium pores accounted for 47.3 %–54.7 %,while that trapped in small pores was 25.7 %–42.5 %.The residual oil in small and medium pores was the main target for EOR after the SP flood in oilfields.