The role of temperature‐enhanced fault closure in promoting postinjection pressure diffusion and seismicity in enhanced geothermal systems

Post shut‐in seismic events in enhanced geothermal systems(EGSs)occur predominantly at the outer rim of the co‐injection seismic cloud.The concept of postinjection fracture and fault closure near the injection well has been proposed and validated as a mechanism for enhancing post shut‐in pressure diffusion that promotes seismic hazard.This phenomenon is primarily attributed to the poro‐elastic closure of fractures resulting from the reduction of wellbore pressure after injection termination.However,the thermal effects in EGSs,mainly including heat transfer and thermal stress,may not be trivial and their role in postinjection fault closure and pressure evolution needs to be explored.In this study,we performed numerical simulations to analyze the relative importance of poro‐elasticity,heat transfer,and thermo‐elasticity in promoting postinjection fault closure and pressure diffusion.The numerical model wasfirst validated against analytical solutions in terms offluid pressure diffusion and against heatedflow‐through experiments in terms of thermal processes.We then quantified and distinguished the contribution of each individual mechanism by comparing four different shut‐in scenarios simulated under different coupled conditions.Our results highlight the importance of poro‐elastic fault closure in promoting postinjection pressure buildup and seismicity,and suggest that heat transfer can further augment the fault closure‐induced pressure increase and thus potentially intensify the postinjection seismic hazard,with minimal contribution from thermo‐elasticity.

Effects of external temperature and dead volume on laboratory measurements of pore pressure and injected volume in a rock fracture

The accurate evaluation of pore pressure and injected volume is crucial for the laboratory characterization of hydromechanical responses of rock fractures. This study reports a series of laboratory experiments to systematically demonstrate the effects of external temperature and dead volume on laboratory measurements of pore pressure and injected volume in a rock fracture. We characterize the hydraulic aperture of the fracture as a function of effective normal stress using the exponential aperture model.This model is then employed to predict the pore pressure change and injected volume in the fracture without the influences of external temperature and dead volume. The external temperature changes in the cyclic loading test due to the Joule-Thompson effect for fluids. The effect of external temperature on pore pressure change in the fracture can be well explained by thermal pressurization of fluids. Our results also show that the external dead volume can significantly lower the pore pressure change in the fracture during the cyclic loading test under undrained conditions. The injected volume can also be substantially enlarged due to the external dead volume in a typical pore pressure system. Internal measurement of the pore pressure in the fracture using a fiber optic sensor cannot exclude the influences of external temperature and dead volume, primarily because of the good hydraulic communication between the fracture and pore pressure system. This study suggests that the effects of external temperature and dead volume on pore pressure response and injected volume should be evaluated for accurate laboratory characterization and inter-laboratory comparison.