Visual experimental study of nanofluids application to promote CO_(2) absorption in a bubble column

The addition of dispersed-phase nanoparticles in the liquid phase can enhance the gas-liquid transfer process as the suspended nanoparticles affect the transfer process inside the fluid through microdisturbance or micro-convection effects.In this article,a high-speed digital camera was used to visualize the bubble behavior of CO_(2) in pure water and nanofluids to examine the effects of CO_(2) gas flow rate,nanoparticle solid content and type on the bubble behavior in the fluids.The CO_(2) absorption performance in three water-based nanofluids were compared in a bubbler.And the mass transfer characteristics during CO_(2) bubble absorption and the reasons for the enhanced gas-liquid mass transfer effect of nanoparticles were analyzed.The results showed that the presence of nanoparticles affected the formation process of bubbles in the fluid,shortened the bubble detachment time,reduced the detachment diameter,effectively increased the gas-liquid contact area,and improved the bubbles detachment frequency.The system with MCM-41 corresponded to a higher overall mass transfer coefficient.Uncalined MCM-41 contained surfactant that enhanced foaming behavior in water.This prevented the transfer of CO_(2) to some extent,and the CO_(2) absorption by uncalined MCM-41/H_(2)O was 5.34%higher than that by pure water.Compared with SiO_(2) nanoparticles with the same particle size and the same composition,MCM-41 had a higher adsorption capacity and better hydrophilicity due to its larger specific surface area and rich porous structure,which was more favorable to accelerate the collision between nanoparticles and CO_(2) bubbles to cause micro-convection.Under the condition of 0.1%(mass)solid content,the enhancement of CO_(2) absorption process by MCM-41 nanoparticles was more significant and improved by 16.9%compared with pure water.

Reflection on methodology of the correlation between electromagnetic interference and safety in high-speed railway

Purpose – In the continuous development of high-speed railways, ensuring the safety of the operation controlsystem is crucial. Electromagnetic interference (EMI) faults in signaling equipment may cause transportationinterruptions, delays and even threaten the safety of train operations. Exploring the impact of disturbances onsignaling equipment and establishing evaluation methods for the correlation between EMI and safety isurgently needed.Design/methodology/approach – This paper elaborates on the necessity and significance of studying theimpact of EMI as an unavoidable and widespread risk factor in the external environment of high-speed railwayoperations and continuous development. The current status of research methods and achievements from theperspectives of standard systems, reliability analysis and safety assessment are examined layer by layer.Additionally, it provides prospects for innovative ideas for exploring the quantitative correlation between EMIand signaling safety.Findings – Despite certain innovative achievements in both domestic and international standard systems andrelated research for ensuring and evaluating railway signaling safety, there’s a lack of quantitative and strategic research on the degradation of safety performance in signaling equipment due to EMI. A quantitativecorrelation between EMI and safety has yet to be established. On this basis, this paper proposes considerationsfor research methods pertaining to the correlation between EMI and safety.Originality/value – This paper overviews a series of methods and outcomes derived from domestic andinternational studies regarding railway signaling safety, encompassing standard systems, reliability analysisand safety assessment. Recognizing the necessity for quantitatively describing and predicting the impact ofEMI on high-speed railway signaling safety, an innovative approach using risk assessment techniques as abridge to establish the correlation between EMI and signaling safety is proposed.

Microscale mechanism of tailing thickening in metal mines

Water-locking flocs formed by ultrafine tailings particles will damage the thickener underflow concentration in the thickening process during paste preparation.The relationship between the mesostructure and seepage characteristics of tail mortar is typically ignored when investigating the deep dehydration stage.A shearing seepage test of an unclassified tailing-sedimentation bed was performed with copper tailings,and the morphology and geometric distribution of micropores were analyzed via X-ray computed tomography.Moreover,the shearing evolution of the micropore structure and seepage channel was investigated to evaluate the dewatering performance of underflow slurry using a three-dimensional reconstruction approach.The results show that porosity decreases considerably under shearing.The connected-pore ratio and the average radius of the throat channel reach peak values of 0.79 and 31.38μm,respectively,when shearing is applied for 10 min.However,the reverse seepage velocity and absolute permeability in the bed decrease to various extents after shearing.Meanwhile,the maximum flow rate reaches 1.537μm/s and the absolute permeability increases by 14.16%.Shearing alters the formation process and the pore structure of the seepage channel.Isolated pores connect to the surrounding flocs to form branch channels,which then become the main seepage channel and create the dominant water-seepage flow channel.

Theoretical study of the enhancement of saturable absorption of Kr under x-ray free-electron laser

The generation of hollow atoms will reduce the probability of light absorption and provide a high-quality diffraction image in the experiment. In this paper, we calculated the ionization rate of the Kr atom under x-ray free-electron laser(XFEL) using Hartree–Fock–Slater model and simulated the ionization model of Kr atom using Monte–Carlo method to determine the response of the hollow atom of Kr atom to the XFEL photon energy. Calculating the correlation between the total photoionization cross-section of the ground state of Kr atom and the photon energy, we determined three particular photon energies of 1.75 ke V, 1.90 ke V, and 14.30 ke V. The dynamics simulation under the experimental condition's17.50 ke V photon energy was achieved by implementing the Monte–Carlo method and calibrating the photon flux modeling parameters. Consequently, our calculated data are more consistent with experimental phenomena than previous theoretical studies. The saturable absorption of Kr at 1.75 ke V, 1.90 ke V, 14.30 ke V, and 17.50 ke V energies was further investigated by using the optimized photon flux model theory. We compared the statistics on main ionization paths under those four specific photon energies and calculated the population changes of various Kr hollow atoms with different configurations.The results demonstrate that the population of hollow atoms produced at the critical ionization photon energy is high. Furthermore, the change of population with respect to position is smooth, which shows a significant difference between the generation mode of ions with low and high photon energies. The result is important for the study of medium-and high-Z element hollow atoms, which has substantial implications for the study of hollow atoms with medium and high charge states, as well as for the scaling of photon energy of free electron lasers.

An Improved Behavioral Model for High-voltage and High-power IGBT Chips

High-voltage and high-power IGBT chips have a noticeable carrier storage effect,which is related to the load current.However,the research on the carrier storage effect of existing IGBT behavior models is insufficient.In this paper,An improved behavioral model for high-voltage and high-power insulated gate bipolar transistor(IGBT)chips is proposed,which could be used under different load conditions.The problems for applying the traditional behavioral model to more load conditions are discussed.Carrier behavior,in the wide base region,is analyzed,and the analytical expression of the carrierstorage-effect equivalent capacitance and the initial value of the tail current are provided to establish an improved IGBT behavioral model.A corresponding parameter extraction method is proposed.In order to verify the improved behavioral model,an experimental platform is built for resistive load and inductive load,and the results show that the accuracy of the improved behavioral model is much better than that of the traditional model.In addition,the errors of the improved model are within 12.5%under different current and load types.Considering that the maximum error of other models,which could be applied in a variety of load conditions,is more than 25%,the accuracy of the model proposed in this paper is excellent.

Precise assembly of inside-out cell membrane camouflaged nanoparticles via bioorthogonal reactions for improving drug leads capturing

Cell membrane camouflaged nanoparticles have been widely used in the field of drug leads discovery attribute to their unique biointerface targeting function.However,random orientation of cell membrane coating does not guarantee effective and appropriate binding of drugs to specific sites,especially when applied to intracellular regions of transmembrane proteins.Bioorthogonal reactions have been rapidly developed as a specific and reliable method for cell membrane functionalization without disturbing living biosystem.Herein,inside-out cell membrane camouflaged magnetic nanoparticles(IOCMMNPs)were accurately constructed via bioorthogonal reactions to screen small molecule inhibitors targeting intracellular tyrosine kinase domain of vascular endothelial growth factor recptor-2.Azide functionalized cell membrane acted as a platform for specific covalently coupling with alkynyl functionalized magnetic Fe_(3)O_(4)nanoparticles to prepare IOCMMNPs.The inside-out orientation of cell membrane was successfully verified by immunogold staining and sialic acid quantification assay.Ultimately,two compounds,senkyunolide A and ligustilidel,were successfully captured,and their potential antiproliferative activities were further testified by pharmacological experiments.It is anticipated that the proposed inside-out cell membrane coating strategy endows tremendous versatility for engineering cell membrane camouflaged nanoparticles and promotes the development of drug leads discovery platforms.

Analysis of Operational Characteristics and Equivalent Test Method for IGBTs in MMC

A design methodology and a feasible equivalent circuit are proposed to test the reliability of insulated gate bipolar transistors(IGBT)in actual modular multilevel converter(MMC)conditions,which is impossible for existing IGBT test platforms due to unexplicit equivalent indexes and low reliability of test platforms.Characteristics of IGBT devices are extracted during MMC operation,and turn-off transient and effective current are highlighted as key indexes for the equivalent test.A feasible equivalent timing diagram and a corresponding test circuit are proposed,as well as the circuit's operation concept.The proposed equivalent test method is verified by a back-to-back experiment with twenty-four submodules,and results indicate the proposed method has good equivalence.Between the proposed circuit waveform and the back-to-back experiment waveform,all indexes have errors of less than 5.9%.Furthermore,the proposed circuit components have losses less than 0.7 times those of the device under test,making them reliable and suitable for long-term operation tests for IGBT devices in MMC.Index Terms-Equivalent test,IGBT,MMC,reliability.

Biointerface engineering of self-protective bionic nanomissiles for targeted synergistic chemotherapy

Erythrocyte membrane(EM)-camouflaged chemotherapeutic delivery nanovehicles hold promise for solid tumor therapy because of their excellent biostability and biocompatibility. However, it is accompanied with insufficient targeting effect and deficient pharmacokinetic behavior due to the lack of a regulated biointerface to navigate and overcome biological transportation obstacles in solid tumor therapy.Herein, an anti-epidermal growth factor receptor(EGFR) aptamer(EApt) modified and EM-cloaked chemotherapeutic nanomissile delivery system was constructed. The anchored-EApt acting as a specific EGFR suppressor promotes to inhibit the overexpression of EGFR and initiate the cell apoptosis. Importantly, the resulting PLGA-DOX@EM-EApt orchestrated the bioactivity of each component and provided synergistic cell apoptosis and antitumor effects by precisely suppressing EGFR expression levels and delivering DOX. The in vitro and in vivo experimental results confirmed that the immune escape and active targeting behaviors of PLGA-DOX@EM-EApt could significantly promote its drug retention and tumor inhibition abilities. Our findings propose a novel strategy using the biointerface functionalization technique, demonstrating a promising therapeutic platform via a biomimetic drug delivery system for precise solid tumor recognition and synergistic therapy.

Formation of water disinfection byproduct 2,6-dichloro-1,4-benzoquinone from chlorination of green algae

We report that green algae in lakes and rivers can serve as precursors of halobenzoquinone（HBQ） disinfection byproducts（DBPs） produced during chlorination. Chlorination of a common green alga, Chlorella vulgaris, produced 2,6-dichloro-1,4-benzoquinone（2,6-DCBQ）, the most prevalent HBQ DBP in disinfected water. Under varying p H conditions（p H 6.0–9.0）, 2,6-DCBQ formation ranged from 0.3 to 2.1 μg/mg C with maximum formation at p H 8.0. To evaluate the contribution of organic components of C. vulgaris to 2,6-DCBQ formation, we separated the organics into two fractions, the protein-rich fraction of intracellular organic matter（IOM） and the polysaccharide-laden fraction of extracellular organic matter（EOM）. Chlorination of IOM and EOM produced 1.4 μg/mg C and 0.7 μg/mg C of 2,6-DCBQ, respectively. The IOM generated a two-fold higher 2,6-DCBQ formation potential than the EOM fraction, suggesting that proteins are potent 2,6-DCBQ precursors. This was confirmed by the chlorination of proteins extracted from C. vulgaris： the amount of 2,6-DCBQ produced is linearly correlated with the concentration of total algal protein（R2= 0.98）. These results support that proteins are the primary precursors of 2,6-DCBQ in algae, and control of green algal bloom outbreaks in source waters is important for management of HBQ DBPs.

Dispersion and support dictated properties and activities of Pt/metal oxide catalysts in heterogeneous CO oxidation

The source of activity of metal/metal oxides has always been an interesting,important but highly challenging research topic in heterogeneous catalysis.In CO oxidation reaction,this work clarifies dispersion and support dictated activities of Pt including single-atom(Pt1),2.8 nm(PtNP-S)and 36 nm(PtNP-L)Pt supported on both reducible TiO_(2) and“inert”Al_(2)O_(3) supports.The X-ray absorption fine structure(XAFS)shows that chemical state of Pt is affected by both dispersion and support:Pt1 presents fully oxidized state in both Pt1/TiO_(2) and Pt1/Al_(2)O_(3);PtNP-S in PtNP-S/TiO_(2) appear nearly oxidized state while about half of Pt is metallic state in PtNP-S/Al_(2)O_(3);PtNP-L in both PtNP-L/TiO_(2) and PtNP-L/Al_(2)O_(3) exhibit metallic state.All the Pt species supported on TiO_(2) present much lower apparent activation barriers(Eapp)than that on Al_(2)O_(3).Moreover,Pt1/TiO_(2) possesses dozen times of efficiency than PtNP-S/TiO_(2) although they have similar Eapp values.A truth is finally made clear that a reducible metal oxide with low oxygen vacancy formation energy is critical to endow Pt/metal oxide a high activity and the single-atom dispersion of Pt is the way to maximize the active sites of Pt/metal oxide.