The SG-Ⅲlaser facility(SG-Ⅲ)is the largest laser driver for inertial confinement fusion(ICF)researches in China,which has 48 beamlines and can deliver 180 kJ ultraviolet laser energy in 3 ns.In order to meet the req...The SG-Ⅲlaser facility(SG-Ⅲ)is the largest laser driver for inertial confinement fusion(ICF)researches in China,which has 48 beamlines and can deliver 180 kJ ultraviolet laser energy in 3 ns.In order to meet the requirements of precise physics experiments,some new functionalities need to be added to SG-Ⅲand some intrinsic laser performances need upgrade.So at the end of SG-Ⅲ's engineering construction,the 2-year laser performance upgrade project started.This paper will introduce the newly added functionalities and the latest laser performance of SG-Ⅲ.With these function extensions and performance upgrade,SG-Ⅲis now fully prepared for precise ICF experiments and solidly paves the way towards fusion ignition.展开更多
In this paper a methodology is proposed to model the stochastic electro-thermal degradation accumulation in cables.The cable life and the reliability are predicted by estimating the accumulated electro-thermal degrada...In this paper a methodology is proposed to model the stochastic electro-thermal degradation accumulation in cables.The cable life and the reliability are predicted by estimating the accumulated electro-thermal degradation during seasonal load cycles.The degradation is considered,in a novel approach,as stochastic in nature due to variations in the manufacturing process of insulation raw material and in operational and environmental conditions.The methodology is based on estimation of life by using combined electro-thermal life model,simulation of degradation accumulation process under electro-thermal stress in each season of the year based on Miner’s cumulative damage theory and reliability prediction from a probabilistic point of view.A case study is demonstrated on 10 k V XLPE cables which are directly buried in the UK and China.Results show that,the electro-thermal life of the cable is 56 and 69 years in China and the UK,respectively at 50%failure probability,or the life of the cable in the UK would be 13 years longer than in China,when other stresses such as mechanical and environmental are also considered and assumed to be the same.展开更多
Conventionally, an experimentally determined phase diagram requires studies of phase formation at a range of temperatures for each composition, which takes years of effort from multiple research groups. Combinatorial ...Conventionally, an experimentally determined phase diagram requires studies of phase formation at a range of temperatures for each composition, which takes years of effort from multiple research groups. Combinatorial materials chip technology, featuring high-throughput synthesis and characterization, is able to determine the phase diagram of an entire composition spread of a binary or ternary system at a single temperature on one materials library, which, though significantly increasing efficiency, still requires many libraries processed at a series of temperatures in order to complete a phase diagram. In this paper, we propose a "one-chip method" to construct a complete phase diagram by individually synthesizing each pixel step by step with a progressive pulse of energy to heat at different temperatures while monitoring the phase evolution on the pixel in situ in real time. Repeating this process pixel by pixel throughout the whole chip allows the entire binary or ternary phase diagram to be mapped on one chip in a single experiment. The feasibility of this methodology is demonstrated in a study of a Ge-Sb-Te ternary alloy system, on which the amorphouscrystalline phase boundary is determined.展开更多
The performance of lithium-sulfur batteries is deteriorated by the inferior conductivity of sulfur,the shuttle effect of lithium polysulfides(LiPSs),sluggish redox kinetics of polysulfide intermediates and serious vol...The performance of lithium-sulfur batteries is deteriorated by the inferior conductivity of sulfur,the shuttle effect of lithium polysulfides(LiPSs),sluggish redox kinetics of polysulfide intermediates and serious volumetric expansion of sulfur.To overcome these challenges,we report a versatile route to prepare multi-functional nanocomposites with tuable hierarchical structure via ammonium hydroxide(NH_(3)·H_(2) O)induced self-assembly.The versatility of the system has been demonstrated that the organization of the hierarchical structure can be regulated by adding different amounts of NH_(3)·H_(2) O,and WS_(2) and Co_(9)S_(8) with nitrogen-doped carbon coating(denoted as WS_(2)@NC and Co_(9)S_(8)@NC)can be prepared by adding different precursor salts.When the as-prepared materials are applied for Li-S batteries,the WS_(2)@NC composite exhibits a reversible capacity of 1107.4 mAh g^(-1) at 0.1 C after 500 cycles and even 728.9 mAh g^(-1) at2 C for 1000 cycles,which is significantly better than the Co_(9)S_(8) counterpart and other reported WS_(2) sulfur hosts.Experimentally,the advantageous performance of WS_(2) could be attributed to its higher surface area and total pore volume,giving rise to the easier access to electrolyte and better ability to buffer the volume change during the charge/discharge process.Theoretically,the density function theory(DFT)calculation reveals that the as-prepared WS_(2) has a higher binding energy towards LiPSs as well as a lower energy barrier for Li^(+)diffusion on the surface than Co_(9)S_(8).More significantly,the density of states(DOS)analysis further confirms that the superior performance is mainly ascribed to the more prominent shifting and the more charge compensation from d band of W than Co,which increase electronic concentration and give more hybridization of d-p orbitals in the Fermi level of the adsorbed Li2 S4 to accelerate the lithium polysulfide interfacial redox and conversion dynamics in WS_(2).By proposing this mechanism,this work sheds new light on the understanding of catalytic conversion of lithium polysulfides at the atomic level and the strategy to develop advanced cathode materials for high-performance lithium-sulfur batteries.展开更多
In this study, the solubility of m-phenylenediamine in four pure solvents(methanol, ethanol, acetonitrile and water) and three binary solvent(methanol + water),(ethanol + water) and(acetonitrile + water) systems were ...In this study, the solubility of m-phenylenediamine in four pure solvents(methanol, ethanol, acetonitrile and water) and three binary solvent(methanol + water),(ethanol + water) and(acetonitrile + water) systems were determined in the temperature ranging from 278.15 K to 313.15 K by using the gravimetric method under atmospheric pressure. In the temperature range of 278.15 K to 313.15 K, the mole fraction solubility values of m-phenylenediamine in water, methanol, ethanol, and acetonitrile are 0.0093–0.1533, 0.1668–0.5589,0.1072–0.5356, and 0.1717–0.6438, respectively. At constant temperature and solvent composition, the mole fraction solubility of o-phenylenediamine in four pure solvents was increased as the following order:water b ethanol b methanol b acetonitrile;and in the three binary solvent mixtures could be ranked as follows:(ethanol + water) b(methanol + water) b(acetonitrile + water). The relationship between the experimental temperature and the solubility of m-phenylenediamine was revealed as follows: the solubility of mphenylenediamine in pure and binary solvents could be increased with the increase of temperature. The experimental values were correlated with the Jouyban–Acree model, van’t Hoff–Jouyban–Acree model, modified Apelblat–Jouyban–Acree model, Sun model and Ma model. The standard dissolution enthalpy, standard dissolution entropy and the Gibbs energy were calculated based on the experimental solubility data. In the binary solvent mixtures, the dissolution of m-phenylenediamine could be an endothermic process. The solubility data,correlation equations and thermodynamic property obtained from this study would be invoked as basic data and models regarding the purification and crystallization process of m-phenylenediamine.展开更多
Nickel oxide(NiOx)has exhibited great potential as an inorganic hole transport layer(HTL)in perovskite solar cells(PSCs)due to its wide optical bandgap and superior stability.In this study,we have modulated the Ni26 v...Nickel oxide(NiOx)has exhibited great potential as an inorganic hole transport layer(HTL)in perovskite solar cells(PSCs)due to its wide optical bandgap and superior stability.In this study,we have modulated the Ni26 vacancies in NiOx film by controlling deposition temperature in a hot-casting process,resulting the change of coordination structure and charge state of NiOx.Moreover,the change of the HOMO level of NiOx makes it more compatible with perovskite to decrease energy losses and enhance hole carrier injection efficiency.Besides,the defect modulation in the electronic structure of NiOx is beneficial for increasing the electrical conductivity and mobility,which are considered to achieve the balance of charge carrier transport and avoid charge accumulation at the interface between perovskite and HTL effectively.Both experimental analyses and theoretical calculations reveal the increase of nickel vacancy defects change the electronic structure of NiOx by increasing the ratio of Ni3^+/Ni2^+-and improving the p-type characteristics.Accordingly,an optimal deposition temperature at 120℃enabled a 36.24%improvement in the power conversion efficiency compared to that deposited at room temperature(25℃).Therefore,this work provides a facile method to manipulate the electronic structure of NiOx to improve the charge carrier transport and photovoltaic performance of related PSCs.展开更多
Tremor is an involuntary and oscillatory movement disorder that makes daily activities difficult for affected patients. Hand tremor-suppression orthoses are noninvasive, wearable devices designed to mitigate tremors. ...Tremor is an involuntary and oscillatory movement disorder that makes daily activities difficult for affected patients. Hand tremor-suppression orthoses are noninvasive, wearable devices designed to mitigate tremors. Various studies have shown that these devices are effective, economical, and safe;however, they have drawbacks such as large weight, awkward shape, and rigid parts. This study investigates different types of tremor-suppression orthoses and discusses their efficiency, mechanism,benefits, and disadvantages. First, various orthoses(with passive, semi-active, and active mechanisms) are described in detail.Next, we look at how additive manufacturing(AM) has progressed recently in making sensors and actuators for application in tremor orthoses. Then, the materials used in AM are further analyzed. It is found that traditional manufacturing problems can be solved with the help of AM techniques, like making orthoses that are affordable, lighter, and more customizable. Another concept being discussed is using smart materials and AM methods, such as four-dimensional(4D) printing, to make orthoses that are more comfortable and efficient.展开更多
A fourth harmonic generation(FHG)scheme in focusing beams is proposed and demonstrated for large aperture Nd:glass laser facilities.By placing the focusing lens before the FHG crystal,the problem of ultraviolet damage...A fourth harmonic generation(FHG)scheme in focusing beams is proposed and demonstrated for large aperture Nd:glass laser facilities.By placing the focusing lens before the FHG crystal,the problem of ultraviolet damage can be overcome,largely without affecting FHG conversion efficiency owing to the large angular acceptance of the non-critical phase matching technique.A numerical simulation of the FHG process indicates that angular acceptance can be appropriately increased by lowering the working temperature and jointing the two adjacent compensating angles,so that FHG in focusing beams with relatively small F numbers becomes feasible.With a 170mm3170mm37mmand 65%deuterated potassium dihydrogen phosphate crystal mounted in a high-precision,temperature-controlled system,high-efficiency FHG has been demonstrated in the focusing beam with a full beam convergence angle of 36 mrad.When driven with a 223 J,second harmonic radiation(2ω),1 ns flat-top pulse with a beam area of 130 cm2,corresponding to 1.7 GW/cm22ωinput intensity,182 J of fourth harmonic radiation(4ω)were generated.展开更多
Seeds establish dormancy to delay germination until the arrival of a favorable growing season.In this study,we identify a fate switch comprised of the MKK3–MPK7 kinase cascade and the ethylene response factor ERF4 th...Seeds establish dormancy to delay germination until the arrival of a favorable growing season.In this study,we identify a fate switch comprised of the MKK3–MPK7 kinase cascade and the ethylene response factor ERF4 that is responsible for the seed state transition from dormancy to germination.We show that dormancy-breaking factors activate the MKK3–MPK7 module,which affects the expression of some a-EXPANSIN(EXPA)genes to control seed dormancy.Furthermore,we identify a direct downstream substrate of this module,ERF4,which suppresses the expression of these EXPAs by directly binding to the GCC boxes in their exon regions.The activated MKK3–MPK7 module phosphorylates ERF4,leading to its rapid degradation and thereby releasing its inhibitory effect on the expression of these EXPAs.Collectively,our work identifies a signaling chain consisting of protein phosphorylation,degradation,and gene transcription,by which the germination promoters within the embryo sense and are activated by germination signals from ambient conditions.展开更多
Whole-genome genotyping methods are important for breeding.However,it has been challenging to develop a robust method for simultaneous foreground and background genotyping that can easily be adapted to different genes...Whole-genome genotyping methods are important for breeding.However,it has been challenging to develop a robust method for simultaneous foreground and background genotyping that can easily be adapted to different genes and species.In our study,we accidently discovered that in adapter ligation-mediated PCR,the amplification by primertemplate mismatched annealing(PTMA)along the genome could generate thousands of stable PCR products.Based on this observation,we consequently developed a novel method for simultaneous foreground and background integrated genotyping by sequencing(FBI-seq)using one specific primer,in which foreground genotyping is performed by primer-template perfect annealing(PTPA),while background genotyping employs PTMA.Unlike DNA arrays,multiple PCR,or genome target enrichments,FBI-seq requires little preliminary work for primer design and synthesis,and it is easily adaptable to different foreground genes and species.FBI-seq therefore provides a prolific,robust,and accurate method for simultaneous foreground and background genotyping to facilitate breeding in the postgenomics era.展开更多
Growing market demand from portable electronics to electric automobiles boosts the development of lithium-ion batteries(LIBs)with high energy density and rate performance.However,strong solvation effect between lithiu...Growing market demand from portable electronics to electric automobiles boosts the development of lithium-ion batteries(LIBs)with high energy density and rate performance.However,strong solvation effect between lithium ions(Li^(+))and solvent molecules in common electrolytes limits the mobility of Li^(+)ions in electrolytes.Consequently,anions dominate the charge conduction in electrolytes,and in most cases,the value of Li^(+)transference number(T_(+))is between 0.2 and 0.4.A low T_(+)will aggravate concentration polarization in the process of charging and discharging,especially at high rate,which not only increases the overpotential but also intensifies side reactions,along with uneven deposition of lithium(Li)and the growth of lithium dendrites when lithium metal is used as anode.In this review,promising strategies to improve T_(+)in liquid electrolytes would be summarized.The migration of Li^(+)ions is affected directly by the types and concentration of lithium salts,solvents,and additives in bulk electrolytes.Besides,Li^(+)ions will pass through the separator and solid electrolyte interphase(SEI)when transferring between anodes and cathodes.With this in mind,we will classify and summarize threads of enhancing T_(+)from five aspects:lithium salts,solvents,additives,separators,and SEI based on different mechanisms,including covalently bonding,desolvation effect,Lewis acid-base interaction,electrostatic interaction,pore sieving,and supramolecular interaction.We believe this review will present a systematic understanding and summary on T_(+)and point out some feasible threads to enhance battery performance by enhancing T_(+).展开更多
SG-Ⅲ laser facility is now the largest laser driver for inertial confinement fusion research in China. The whole laser facility can deliver 180 kJ energy and 60 TW power ultraviolet laser onto target, with power bala...SG-Ⅲ laser facility is now the largest laser driver for inertial confinement fusion research in China. The whole laser facility can deliver 180 kJ energy and 60 TW power ultraviolet laser onto target, with power balance better than 10%.We review the laser system and introduce the SG-Ⅲ laser performance here.展开更多
Pre-harvest sprouting(PHS),which reduces grain yield and quality,is controlled by seed dormancy genes.Because few dormancy-related genes have been cloned,the genetic basis of seed dormancy in rice(Oryza sativa L.)rema...Pre-harvest sprouting(PHS),which reduces grain yield and quality,is controlled by seed dormancy genes.Because few dormancy-related genes have been cloned,the genetic basis of seed dormancy in rice(Oryza sativa L.)remains unclear.Here,we performed a genome-wide association study and linkage mapping to dissect the genetic basis of seed dormancy in rice.Our findings suggest that Seed Dormancy4(Sdr4),a central modulator of seed dormancy,integrates the abscisic acid and gibberellic acid signaling pathways at the transcriptional level.Haplotype analysis revealed that three Sdr4 alleles in rice cultivars already existed in ancestral Oryza rufipogon accessions.Furthermore,like the semi-dwarf 1(SD1)and Rc loci,Sdr4 underwent selection during the domestication and improvement of Asian cultivated rice.The distribution frequency of the Sdr4-n allele in different locations in Asia is negatively associated with local annual temperature and precipitation.Finally,we developed functional molecular markers for Sdr4,SD1,and Rc for use in molecular breeding.Our results provide clues about the molecular basis of Sdr4-regulated seed dormancy.Moreover,these findings provide guidance for utilizing the favorable alleles of Sdr4 and Rc to synergistically boost PHS resistance,yield,and quality in modern rice varieties.展开更多
基金This work is supported by the SG-Ⅲ performance upgrade project.
文摘The SG-Ⅲlaser facility(SG-Ⅲ)is the largest laser driver for inertial confinement fusion(ICF)researches in China,which has 48 beamlines and can deliver 180 kJ ultraviolet laser energy in 3 ns.In order to meet the requirements of precise physics experiments,some new functionalities need to be added to SG-Ⅲand some intrinsic laser performances need upgrade.So at the end of SG-Ⅲ's engineering construction,the 2-year laser performance upgrade project started.This paper will introduce the newly added functionalities and the latest laser performance of SG-Ⅲ.With these function extensions and performance upgrade,SG-Ⅲis now fully prepared for precise ICF experiments and solidly paves the way towards fusion ignition.
文摘In this paper a methodology is proposed to model the stochastic electro-thermal degradation accumulation in cables.The cable life and the reliability are predicted by estimating the accumulated electro-thermal degradation during seasonal load cycles.The degradation is considered,in a novel approach,as stochastic in nature due to variations in the manufacturing process of insulation raw material and in operational and environmental conditions.The methodology is based on estimation of life by using combined electro-thermal life model,simulation of degradation accumulation process under electro-thermal stress in each season of the year based on Miner’s cumulative damage theory and reliability prediction from a probabilistic point of view.A case study is demonstrated on 10 k V XLPE cables which are directly buried in the UK and China.Results show that,the electro-thermal life of the cable is 56 and 69 years in China and the UK,respectively at 50%failure probability,or the life of the cable in the UK would be 13 years longer than in China,when other stresses such as mechanical and environmental are also considered and assumed to be the same.
基金supported in part by National High Technology Research and Development Program (2015AA034204)the National Natural Science Foundation of China (51472044)
文摘Conventionally, an experimentally determined phase diagram requires studies of phase formation at a range of temperatures for each composition, which takes years of effort from multiple research groups. Combinatorial materials chip technology, featuring high-throughput synthesis and characterization, is able to determine the phase diagram of an entire composition spread of a binary or ternary system at a single temperature on one materials library, which, though significantly increasing efficiency, still requires many libraries processed at a series of temperatures in order to complete a phase diagram. In this paper, we propose a "one-chip method" to construct a complete phase diagram by individually synthesizing each pixel step by step with a progressive pulse of energy to heat at different temperatures while monitoring the phase evolution on the pixel in situ in real time. Repeating this process pixel by pixel throughout the whole chip allows the entire binary or ternary phase diagram to be mapped on one chip in a single experiment. The feasibility of this methodology is demonstrated in a study of a Ge-Sb-Te ternary alloy system, on which the amorphouscrystalline phase boundary is determined.
基金financially supported by National Key Research and Development Program(2018YFB1502503)Fundamental Research Funds for the Central Universities(ZYGX2019J030)Sichuan Science and Technology Program(2020YJ0299)。
文摘The performance of lithium-sulfur batteries is deteriorated by the inferior conductivity of sulfur,the shuttle effect of lithium polysulfides(LiPSs),sluggish redox kinetics of polysulfide intermediates and serious volumetric expansion of sulfur.To overcome these challenges,we report a versatile route to prepare multi-functional nanocomposites with tuable hierarchical structure via ammonium hydroxide(NH_(3)·H_(2) O)induced self-assembly.The versatility of the system has been demonstrated that the organization of the hierarchical structure can be regulated by adding different amounts of NH_(3)·H_(2) O,and WS_(2) and Co_(9)S_(8) with nitrogen-doped carbon coating(denoted as WS_(2)@NC and Co_(9)S_(8)@NC)can be prepared by adding different precursor salts.When the as-prepared materials are applied for Li-S batteries,the WS_(2)@NC composite exhibits a reversible capacity of 1107.4 mAh g^(-1) at 0.1 C after 500 cycles and even 728.9 mAh g^(-1) at2 C for 1000 cycles,which is significantly better than the Co_(9)S_(8) counterpart and other reported WS_(2) sulfur hosts.Experimentally,the advantageous performance of WS_(2) could be attributed to its higher surface area and total pore volume,giving rise to the easier access to electrolyte and better ability to buffer the volume change during the charge/discharge process.Theoretically,the density function theory(DFT)calculation reveals that the as-prepared WS_(2) has a higher binding energy towards LiPSs as well as a lower energy barrier for Li^(+)diffusion on the surface than Co_(9)S_(8).More significantly,the density of states(DOS)analysis further confirms that the superior performance is mainly ascribed to the more prominent shifting and the more charge compensation from d band of W than Co,which increase electronic concentration and give more hybridization of d-p orbitals in the Fermi level of the adsorbed Li2 S4 to accelerate the lithium polysulfide interfacial redox and conversion dynamics in WS_(2).By proposing this mechanism,this work sheds new light on the understanding of catalytic conversion of lithium polysulfides at the atomic level and the strategy to develop advanced cathode materials for high-performance lithium-sulfur batteries.
基金financially supported by the North Chemical Group Youth Science and Technology Innovation Foundation of China(QKCZ201627)
文摘In this study, the solubility of m-phenylenediamine in four pure solvents(methanol, ethanol, acetonitrile and water) and three binary solvent(methanol + water),(ethanol + water) and(acetonitrile + water) systems were determined in the temperature ranging from 278.15 K to 313.15 K by using the gravimetric method under atmospheric pressure. In the temperature range of 278.15 K to 313.15 K, the mole fraction solubility values of m-phenylenediamine in water, methanol, ethanol, and acetonitrile are 0.0093–0.1533, 0.1668–0.5589,0.1072–0.5356, and 0.1717–0.6438, respectively. At constant temperature and solvent composition, the mole fraction solubility of o-phenylenediamine in four pure solvents was increased as the following order:water b ethanol b methanol b acetonitrile;and in the three binary solvent mixtures could be ranked as follows:(ethanol + water) b(methanol + water) b(acetonitrile + water). The relationship between the experimental temperature and the solubility of m-phenylenediamine was revealed as follows: the solubility of mphenylenediamine in pure and binary solvents could be increased with the increase of temperature. The experimental values were correlated with the Jouyban–Acree model, van’t Hoff–Jouyban–Acree model, modified Apelblat–Jouyban–Acree model, Sun model and Ma model. The standard dissolution enthalpy, standard dissolution entropy and the Gibbs energy were calculated based on the experimental solubility data. In the binary solvent mixtures, the dissolution of m-phenylenediamine could be an endothermic process. The solubility data,correlation equations and thermodynamic property obtained from this study would be invoked as basic data and models regarding the purification and crystallization process of m-phenylenediamine.
基金financially supported by the National Natural Science Foundation of China NSFC(51702038)the Recruitment Program for Young Professionals+1 种基金the National Key Research and Development Program of China(2017YFA0206600)the National Natural Science Foundation of China(51773045,21772030,51922032,21961160720)for financial support。
文摘Nickel oxide(NiOx)has exhibited great potential as an inorganic hole transport layer(HTL)in perovskite solar cells(PSCs)due to its wide optical bandgap and superior stability.In this study,we have modulated the Ni26 vacancies in NiOx film by controlling deposition temperature in a hot-casting process,resulting the change of coordination structure and charge state of NiOx.Moreover,the change of the HOMO level of NiOx makes it more compatible with perovskite to decrease energy losses and enhance hole carrier injection efficiency.Besides,the defect modulation in the electronic structure of NiOx is beneficial for increasing the electrical conductivity and mobility,which are considered to achieve the balance of charge carrier transport and avoid charge accumulation at the interface between perovskite and HTL effectively.Both experimental analyses and theoretical calculations reveal the increase of nickel vacancy defects change the electronic structure of NiOx by increasing the ratio of Ni3^+/Ni2^+-and improving the p-type characteristics.Accordingly,an optimal deposition temperature at 120℃enabled a 36.24%improvement in the power conversion efficiency compared to that deposited at room temperature(25℃).Therefore,this work provides a facile method to manipulate the electronic structure of NiOx to improve the charge carrier transport and photovoltaic performance of related PSCs.
基金Faculty of Science, Engineering and Built Environment, Deakin University, for 2021 Mini ARC Analog Program (MAAP)—Discovery 253101, for financial support。
文摘Tremor is an involuntary and oscillatory movement disorder that makes daily activities difficult for affected patients. Hand tremor-suppression orthoses are noninvasive, wearable devices designed to mitigate tremors. Various studies have shown that these devices are effective, economical, and safe;however, they have drawbacks such as large weight, awkward shape, and rigid parts. This study investigates different types of tremor-suppression orthoses and discusses their efficiency, mechanism,benefits, and disadvantages. First, various orthoses(with passive, semi-active, and active mechanisms) are described in detail.Next, we look at how additive manufacturing(AM) has progressed recently in making sensors and actuators for application in tremor orthoses. Then, the materials used in AM are further analyzed. It is found that traditional manufacturing problems can be solved with the help of AM techniques, like making orthoses that are affordable, lighter, and more customizable. Another concept being discussed is using smart materials and AM methods, such as four-dimensional(4D) printing, to make orthoses that are more comfortable and efficient.
基金This work was supported by the National Natural Science Foundation of China under Grant Nos.11704352 and 61775199The large aperture DKDP crystal was provided by State Key Laboratory of Crystal Materials,Shandong University.
文摘A fourth harmonic generation(FHG)scheme in focusing beams is proposed and demonstrated for large aperture Nd:glass laser facilities.By placing the focusing lens before the FHG crystal,the problem of ultraviolet damage can be overcome,largely without affecting FHG conversion efficiency owing to the large angular acceptance of the non-critical phase matching technique.A numerical simulation of the FHG process indicates that angular acceptance can be appropriately increased by lowering the working temperature and jointing the two adjacent compensating angles,so that FHG in focusing beams with relatively small F numbers becomes feasible.With a 170mm3170mm37mmand 65%deuterated potassium dihydrogen phosphate crystal mounted in a high-precision,temperature-controlled system,high-efficiency FHG has been demonstrated in the focusing beam with a full beam convergence angle of 36 mrad.When driven with a 223 J,second harmonic radiation(2ω),1 ns flat-top pulse with a beam area of 130 cm2,corresponding to 1.7 GW/cm22ωinput intensity,182 J of fourth harmonic radiation(4ω)were generated.
基金supported by the National Natural Science Foundation of China(grant nos.32000250 and 32170364)the China Postdoctoral Science Foundation(grant no.2020M682997)+2 种基金the Key Area Research and Development Program of Guangdong Province(grant no.2021B0707010006)the Science,Technology and Innovation Commission of Shenzhen Municipality(grant nos.KCXFZ-20201221173203009 and KCXFZ20211020164207012)the Dapeng New District Science and Technology Program(grant nos.KJYF202101-09 and RCTD20180102)。
文摘Seeds establish dormancy to delay germination until the arrival of a favorable growing season.In this study,we identify a fate switch comprised of the MKK3–MPK7 kinase cascade and the ethylene response factor ERF4 that is responsible for the seed state transition from dormancy to germination.We show that dormancy-breaking factors activate the MKK3–MPK7 module,which affects the expression of some a-EXPANSIN(EXPA)genes to control seed dormancy.Furthermore,we identify a direct downstream substrate of this module,ERF4,which suppresses the expression of these EXPAs by directly binding to the GCC boxes in their exon regions.The activated MKK3–MPK7 module phosphorylates ERF4,leading to its rapid degradation and thereby releasing its inhibitory effect on the expression of these EXPAs.Collectively,our work identifies a signaling chain consisting of protein phosphorylation,degradation,and gene transcription,by which the germination promoters within the embryo sense and are activated by germination signals from ambient conditions.
基金supported by the National Natural Science Foundation of China(31970379 and 32172086)the Jiangsu Collaborative Innovation Center for Modern Crop Production (JCIC-MCP)+3 种基金the National Key R&D Program of China (ZZ202001)the R&D program of Shenzhen (KCXFZ20211020164207012)the R&D program in key areas of Guangdong Province (2021B0707010006)the Science and Technology Planning Project of Guangdong Province (2022B0202060002)。
文摘Whole-genome genotyping methods are important for breeding.However,it has been challenging to develop a robust method for simultaneous foreground and background genotyping that can easily be adapted to different genes and species.In our study,we accidently discovered that in adapter ligation-mediated PCR,the amplification by primertemplate mismatched annealing(PTMA)along the genome could generate thousands of stable PCR products.Based on this observation,we consequently developed a novel method for simultaneous foreground and background integrated genotyping by sequencing(FBI-seq)using one specific primer,in which foreground genotyping is performed by primer-template perfect annealing(PTPA),while background genotyping employs PTMA.Unlike DNA arrays,multiple PCR,or genome target enrichments,FBI-seq requires little preliminary work for primer design and synthesis,and it is easily adaptable to different foreground genes and species.FBI-seq therefore provides a prolific,robust,and accurate method for simultaneous foreground and background genotyping to facilitate breeding in the postgenomics era.
基金support by the National Natural Science Foundation of China(Nos.22071133 and 21905040)the Tsinghua University-China Petrochemical Corporation Joint Institute for Green Chemical Engineering(No.421120)+1 种基金Tsinghua-Foshan Innovation Special Fund(TFISF,No.2020THFS0130)Tsinghua University Initiative Scientific Research Program.
文摘Growing market demand from portable electronics to electric automobiles boosts the development of lithium-ion batteries(LIBs)with high energy density and rate performance.However,strong solvation effect between lithium ions(Li^(+))and solvent molecules in common electrolytes limits the mobility of Li^(+)ions in electrolytes.Consequently,anions dominate the charge conduction in electrolytes,and in most cases,the value of Li^(+)transference number(T_(+))is between 0.2 and 0.4.A low T_(+)will aggravate concentration polarization in the process of charging and discharging,especially at high rate,which not only increases the overpotential but also intensifies side reactions,along with uneven deposition of lithium(Li)and the growth of lithium dendrites when lithium metal is used as anode.In this review,promising strategies to improve T_(+)in liquid electrolytes would be summarized.The migration of Li^(+)ions is affected directly by the types and concentration of lithium salts,solvents,and additives in bulk electrolytes.Besides,Li^(+)ions will pass through the separator and solid electrolyte interphase(SEI)when transferring between anodes and cathodes.With this in mind,we will classify and summarize threads of enhancing T_(+)from five aspects:lithium salts,solvents,additives,separators,and SEI based on different mechanisms,including covalently bonding,desolvation effect,Lewis acid-base interaction,electrostatic interaction,pore sieving,and supramolecular interaction.We believe this review will present a systematic understanding and summary on T_(+)and point out some feasible threads to enhance battery performance by enhancing T_(+).
文摘SG-Ⅲ laser facility is now the largest laser driver for inertial confinement fusion research in China. The whole laser facility can deliver 180 kJ energy and 60 TW power ultraviolet laser onto target, with power balance better than 10%.We review the laser system and introduce the SG-Ⅲ laser performance here.
基金supported by the National Natural Science Foundation of China (32001612)the Science, Technology and Innovation Commission of Shenzhen Municipality (JCYJ20180306173702268 and KCXFZ20201221173203009)+2 种基金Key-Area Research and Development Program of Guangdong Province (2021B0707010006)Dapeng New District Science and Technology Program (KJYF202101-09 and RCTD20180102)Guangdong Basic and Applied Basic Research Foundation (2019A1515110966)
文摘Pre-harvest sprouting(PHS),which reduces grain yield and quality,is controlled by seed dormancy genes.Because few dormancy-related genes have been cloned,the genetic basis of seed dormancy in rice(Oryza sativa L.)remains unclear.Here,we performed a genome-wide association study and linkage mapping to dissect the genetic basis of seed dormancy in rice.Our findings suggest that Seed Dormancy4(Sdr4),a central modulator of seed dormancy,integrates the abscisic acid and gibberellic acid signaling pathways at the transcriptional level.Haplotype analysis revealed that three Sdr4 alleles in rice cultivars already existed in ancestral Oryza rufipogon accessions.Furthermore,like the semi-dwarf 1(SD1)and Rc loci,Sdr4 underwent selection during the domestication and improvement of Asian cultivated rice.The distribution frequency of the Sdr4-n allele in different locations in Asia is negatively associated with local annual temperature and precipitation.Finally,we developed functional molecular markers for Sdr4,SD1,and Rc for use in molecular breeding.Our results provide clues about the molecular basis of Sdr4-regulated seed dormancy.Moreover,these findings provide guidance for utilizing the favorable alleles of Sdr4 and Rc to synergistically boost PHS resistance,yield,and quality in modern rice varieties.