Cold rolling and heat-treatment were used for the grain refinement of GH4169 superalloy plate.The effects of cold rolling reduction ratio and heat-treatment time on the precipitatedδphase,and the effects ofδ-phase c...Cold rolling and heat-treatment were used for the grain refinement of GH4169 superalloy plate.The effects of cold rolling reduction ratio and heat-treatment time on the precipitatedδphase,and the effects ofδ-phase content and morphology on the mechanical properties of the GH4169 alloy plates,are studied.The results demonstrate that coldrolling can promote the precipitation of theδphase and its transformation from theδ-Ni3Nb phase to theδ-NbNi4 phase.The comprehensive properties of the alloy are better when the heat treatment time is 1 h,with 132 MPa increase in the tensile strength and only 2.9%decrease in the elongation relative to those of the original material.The mechanical properties of the alloy are shown to change greatly with the change in theδ-phase morphology.展开更多
The dynamic recrystallization（DRX） behavior of continuous columnar-grained（CCG） Cu Ni10Fe1 Mn alloy was investigated by hot compression along the solidification direction（SD） and perpendicular to the solidificat...The dynamic recrystallization（DRX） behavior of continuous columnar-grained（CCG） Cu Ni10Fe1 Mn alloy was investigated by hot compression along the solidification direction（SD） and perpendicular to the solidification direction（PD）. Specimens were compressed to a true strain of 0.8 at temperatures ranging from 25°C to 900°C and strain rates ranging from 0.01 to 10 s-1. The results indicate that DRX nucleation at grain boundaries（GBs） and DRX nucleation at slip bands（SBs） are the two main nucleation modes. For SD specimens, C-shaped bending and zig-zagging of the GBs occurred during hot compression, which made DRX nucleation at the GBs easier than that at the SBs. When ln Z ≤ 37.4（Z is the Zener–Hollomon parameter）, DRX can occur in SD specimens with a critical temperature for the DRX onset of;50°C and a thermal activated energy（Q） of 313.5 k J·mol-1. In contrast, in PD specimens, the GBs remained straight, and DRX nucleation occurred preferentially at the SBs. For PD specimens, the critical temperature is about 700°C, Q is 351.7 k J·mol-1, and the occurrence condition of DRX is ln Z ≤ 40.1. The zig-zagging of GB morphology can significantly reduce the nucleation energy at the GBs; as a result, DRX nucleation occurs more easily in SD specimens than in PD specimens.展开更多
基金Project(E2019203005)supported by the Natural Science Foundation of Hebei Province,China。
文摘Cold rolling and heat-treatment were used for the grain refinement of GH4169 superalloy plate.The effects of cold rolling reduction ratio and heat-treatment time on the precipitatedδphase,and the effects ofδ-phase content and morphology on the mechanical properties of the GH4169 alloy plates,are studied.The results demonstrate that coldrolling can promote the precipitation of theδphase and its transformation from theδ-Ni3Nb phase to theδ-NbNi4 phase.The comprehensive properties of the alloy are better when the heat treatment time is 1 h,with 132 MPa increase in the tensile strength and only 2.9%decrease in the elongation relative to those of the original material.The mechanical properties of the alloy are shown to change greatly with the change in theδ-phase morphology.
基金financially supported by the National Key Technology Research and Development Program of China (No. 2011BAE23B00)the National Natural Science Foundation of China (No. 51104015)+1 种基金the Independent Research Program of State Key Laboratory for Advanced Metals and Materials (No. 2012Z-12)the fund of the State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals (SKL-SPM-201204)
文摘The dynamic recrystallization（DRX） behavior of continuous columnar-grained（CCG） Cu Ni10Fe1 Mn alloy was investigated by hot compression along the solidification direction（SD） and perpendicular to the solidification direction（PD）. Specimens were compressed to a true strain of 0.8 at temperatures ranging from 25°C to 900°C and strain rates ranging from 0.01 to 10 s-1. The results indicate that DRX nucleation at grain boundaries（GBs） and DRX nucleation at slip bands（SBs） are the two main nucleation modes. For SD specimens, C-shaped bending and zig-zagging of the GBs occurred during hot compression, which made DRX nucleation at the GBs easier than that at the SBs. When ln Z ≤ 37.4（Z is the Zener–Hollomon parameter）, DRX can occur in SD specimens with a critical temperature for the DRX onset of;50°C and a thermal activated energy（Q） of 313.5 k J·mol-1. In contrast, in PD specimens, the GBs remained straight, and DRX nucleation occurred preferentially at the SBs. For PD specimens, the critical temperature is about 700°C, Q is 351.7 k J·mol-1, and the occurrence condition of DRX is ln Z ≤ 40.1. The zig-zagging of GB morphology can significantly reduce the nucleation energy at the GBs; as a result, DRX nucleation occurs more easily in SD specimens than in PD specimens.
