Continuous bending (CB) process along rolling direction was performed to improve the formability of AZ31 magnesium alloy sheets. The microstructure and texture evolutions were characterized by optical microscopy (OM) ...Continuous bending (CB) process along rolling direction was performed to improve the formability of AZ31 magnesium alloy sheets. The microstructure and texture evolutions were characterized by optical microscopy (OM) and electronic backscatter diffraction (EBSD). The results reveal that the basal texture intensity of continuously bent and annealed (CBA) sample is drastically weakened. A large number of twins are induced on the concave surface by the 1st pass bending and the density of twins obviously declines during the 2nd pass bending owing to the occurrence of detwinning. Due to the asymmetric tension?compression strain states between the outer and inner regions during V-bending, twinning and detwinning are generated alternatively during the CB process. The Erichsen value is 5.2 mm which increases by 41% compared with that of as-received sample. This obvious improvement of formability can be attributed to the weakened basal texture, which leads to a smaller plastic strain ratio (r-value)together with a larger strain-hardening exponent (n-value).展开更多
基金Project(CDJZR13130081)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(CSCT2014FAZKTJCSF50004)supported by the Chongqing Science and Technology Commission,China
文摘Continuous bending (CB) process along rolling direction was performed to improve the formability of AZ31 magnesium alloy sheets. The microstructure and texture evolutions were characterized by optical microscopy (OM) and electronic backscatter diffraction (EBSD). The results reveal that the basal texture intensity of continuously bent and annealed (CBA) sample is drastically weakened. A large number of twins are induced on the concave surface by the 1st pass bending and the density of twins obviously declines during the 2nd pass bending owing to the occurrence of detwinning. Due to the asymmetric tension?compression strain states between the outer and inner regions during V-bending, twinning and detwinning are generated alternatively during the CB process. The Erichsen value is 5.2 mm which increases by 41% compared with that of as-received sample. This obvious improvement of formability can be attributed to the weakened basal texture, which leads to a smaller plastic strain ratio (r-value)together with a larger strain-hardening exponent (n-value).
