Nail Holding Performance of Self-Tapping Screws on Masson Pine and Chinese Fir Dimension Lumbers

Screw connection is a type most commonly applied to timber structures.As important commercial tree species in China,Masson pine and Chinese fir have the potential to prepare wood structures.In this study,the effects of the diameter of the self-tapping screw and the guiding bores on the nail holding performance on different sections of Masson pine and Chinese fir dimension lumbers were mainly explored.The results showed that:(1)The nail holding strength of the tangential section was the maximum,followed by that of the radial section,and that of the cross section was the minimum.(2)The nail holding strength of Masson pine was higher than that of Chinese fir.(3)The nail holding strength grew with the increase in the diameter of self-tapping screws,but a large diameter would lead to plastic cracking of the timber,thus further affecting the nail holding strength.Masson pine and Chinese fir reached the maximum nail holding strength when the diameter of self-tapping screws was 3.5 mm.(4)Under a large diameter of screws,prefabricated guiding bores could mitigate timber cracking and improve its nail holding strength.(5)Prefabricated guiding bores were more necessary for the screw connection of Masson pine.The results obtained could provide a scientific basis for the screw connection design of Masson pine and Chinese fir timber structures.

Fictitious soil pile model for dynamic analysis of pipe piles under high-strain conditions

A fictitious soil pile(FSP)model is developed to simulate the behavior of pipe piles with soil plugs undergoing high-strain dynamic impact loading.The developed model simulates the base soil with a fictitious hollow pile fully filled with a soil plug extending at a cone angle from the pile toe to the bedrock.The friction on the outside and inside of the pile walls is distinguished using different shaft models,and the propagation of stress waves in the base soil and soil plug is considered.The motions of the pile—soil system are solved by discretizing them into spring-mass model based on the finite difference method.Comparisons of the predictions of the proposed model and conventional numerical models,as well as measurements for pipe piles in field tests subjected to impact loading,validate the accuracy of the proposed model.A parametric analysis is conducted to illustrate the influence of the model parameters on the pile dynamic response.Finally,the effective length of the FSP is proposed to approximate the affected soil zone below the pipe pile toe,and some guidance is provided for the selection of the model parameters.

Numerical analysis of bearing behaviors of single batter piles under horizontal loads in various directions

The horizontal bearing behavior of a single batter pile(SBP)is vital to its application in practical engineering;however,the horizontal responses of SBPs change with the directions of horizontal loads,and this phenomenon is rarely investigated.Therefore,the directional differences in the horizontal bearing behaviors of SBPs are investigated in this study.Four model tests are conducted to preliminarily examine the effects of the skew angle of horizontal loads on the horizontal bearing capacities and distributions of the bending moments of the SBPs.Subsequently,the differences in the responses of the SBPs under horizontal loads in various directions at full scale are analyzed comprehensively via finite-element(FE)analysis.The effects of the skew angle on SBP-soil interaction are discussed.Moreover,an empirical design method is proposed based on the FE analysis results to predict the bearing ratios of SBPs in medium-dense and dense sand while considering the effects of the skew angle,batter angle,and pile diameter.The method is confirmed to be effective,as confirmed by the close agreement between the predicting results with the model test(reported in this study)and centrifuge model test results(reported in the literature).