Design and preliminary results of beam return on of high power ion source

Long pulse operation of high power ion source is the requirement of fusion science research on neutral beam injector. A breakdown of accelerator column is drastically increased when operating with high beam energy and long beam duration. To extend the pulse length, which was stopped with every breakdown so far, the beam re-starting technology was developed and utilized. As a result, the voltage drop of every power supply due to breakdown was recovered within a time of 90 ms and beam pulse length was extended much longer than the case before this improvement. The details of the beam re-starting technology and the preliminary results were presented in this manuscript.

The development of data acquisition and processing application system for RF ion source

As the key ion source component of nuclear fusion auxiliary heating devices, the radio frequency （RF） ion source is developed and applied gradually to offer a source plasma with the advantages of ease of control and high reliability. In addition, it easily achieves long-pulse steady-state operation. During the process of the development and testing of the RF ion source, a lot of original experimental data will be generated. Therefore, it is necessary to develop a stable and reliable computer data acquisition and processing application system for realizing the functions of data acquisition, storage, access, and real-time monitoring. In this paper, the development of a data acquisition and processing application system for the RF ion source is presented. The hardware platform is based on the PXI system and the software is programmed on the LabVIEW development environment. The key technologies that are used for the implementation of this software programming mainly include the long-pulse data acquisition technology, multi- threading processing technology, transmission control communication protocol, and the Lempel-Ziv-Oberhumer data compression algorithm. Now, this design has been tested and applied on the RF ion source. The test results show that it can work reliably and steadily. With the help of this design, the stable plasma discharge data of the RF ion source are collected, stored, accessed, and monitored in real-time. It is shown that it has a very practical application significance for the RF experiments.

First results of negative ion extraction with Cs for CRAFT prototype negative beam source

In order to understand the physics and pre-study the engineering issues for radio frequency(RF)negative beam source,a prototype source with a single driver and three-electrode accelerator was developed.Recently,the beam source was tested on the RF source test facility with RF plasma generation,negative ion production and extraction.A magnetic filter system and a Cs injection system were employed to enhance the negative ion production.As a result,a long pulse of 105 s negative ion beam with current density of 153 A m-2 was repeatedly extracted successfully.The source pressure is 0.6 Pa and the ratio of co-extracted electron and negative ion current is around0.3.The details of design and experimental results of beam source were shown in this letter.

The development of data acquisition and control system for extraction power supply of prototype RF ion source

A 16 kV/20 A power supply was developed for the extraction grid of prototype radio frequency（RF） ion source of neutral beam injector. To acquire the state signals of extraction grid power supply（EGPS） and control the operation of the EGPS, a data acquisition and control system has been developed. This system mainly consists of interlock protection circuit board, photoelectric conversion circuit, optical fibers, industrial compact peripheral component interconnect（CPCI） computer and host computer. The human machine interface of host computer delivers commands and data to program of the CPCI computer, as well as offers a convenient client for setting parameters and displaying EGPS status. The CPCI computer acquires the status of the power supply. The system can turn-off the EGPS quickly when the faults of EGPS occur. The system has been applied to the EGPS of prototype RF ion source. Test results show that the data acquisition and control system for the EGPS can meet the requirements of the operation of prototype RF ion source.

EAST-NBI偏转磁体电源控制与保护研究

为满足EAST-NBI恒定磁场需求,保障磁体电源安全、稳态运行,设计了偏转磁体电源控制与保护系统并对其性能进行了实验验证。本文在简要介绍偏转磁体电源的设计指标和技术方案的基础上,详细介绍了其控制与保护系统的设计。实验结果表明,该控制与保护系统保障了磁体电源时序和幅值输出的一致性,并通过故障报警与连锁保护保障了磁体电源的安全可靠运行,满足实验需求。

Study Hybrid Compensation Cophase Traction Power Supply System Schemes for High-Speed and Heavy Haul Electrical Railway with V Connection Transformer

In order to solve negative phase sequence problem of V connection transformer in the high speed and heavy haul electrical railway of China, the hybrid compensative co-phase traction power supply system which based on passive and active compensation is proposed. Firstly, There construction and capacity distribution are analyzed, and the compensation current of active equipment is gave;Second, the feature of the hybrid compensative schemes are discussed. In the end, the related simulation results have confirmed the effectiveness of the compensation schemes in this paper.

Research on Co-phase Power Supply Test System

Co-phase power supply system can solve the problems of power quality of heavy unbalanced three phase, large harmonics and reactive power and cancel neutral section in electric railway power supply system. In order to do further research, a co-phase power supply test system is proposed. By mean of analyzing on structures and principles of YNvd transformer, integrated power flow controller (IPFC) and simulation load, establishing control strategy on IPFC and simulation load, the system is simulated dynamically. The results illustrate that the scheme can well simulate co-phase system, and the negative sequence is eliminated, harmonic and reactive power are real-timely compensated in system.